Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.

Before updating, please read the installation instructions and important information noted below.

Dell Latitude E6430 ATG System BIOS

Απαιτείται επανεκκίνηση ΑΥΤΟΜΑΤΗ ΕΓΚΑΤΑΣΤΑΣΗ Αυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.
Το περιεχόμενο αυτής της σελίδας μπορεί να έχει μεταφραστέι αυτόματα. Για να υποβάλετε σχόλια, συμπληρώστε τη φόρμα στο κάτω μέρος της σελίδας.
This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices.
To view all drivers for your Latitude E6430, go to Προγράμματα οδήγησης και στοιχεία λήψης.
Συνιστάται
Loading the latest available version of the driver...

This is the latest Dell validated version of this driver

This is not the latest Dell validated version of this driver

E6430A12.exe | 8.56 MB
Πληκτρολογήστε την ετικέτα εξυπηρέτησης της συσκευής σας για να ελέγξετε τη συμβατότητα αυτής της λήψης με τη συσκευή σας.
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Λήψη Go to Latest Version
Show details | Download current version instead | View Important Information
Μορφή αρχείου: CPG BIOS Executable for Windows/DOS
Όνομα αρχείου: E6430A12.exe
Μέγεθος αρχείου: 8.56 MB
Περιγραφή μορφής
This file format consists of a BIOS executable file. The Universal (Windows/MS DOS) format can be used to install from any Windows or MS DOS environment.
Για να διασφαλίσετε την ακεραιότητα της λήψης σας, επαληθεύστε την τιμή του αθροίσματος ελέγχου.
MD5:
7bf812050d7b968d523165b458c68da0
SHA1:
e762c8015a736f3285cdb2a2420d48041daadbfa
SHA-256:
1d755de3560ab626c26e3d11abec7b7fe3fe439876f330e6ca0d8a8be201c076

Βρείτε περισσότερες ενημερώσεις. Χρησιμοποιήστε το SupportAssist για να βρείτε όλες τις τελευταίες ενημερώσεις προγραμμάτων οδήγησης για τη συσκευή σας.

Fixes & Enhancements

- Enhanced the Power-On Self-Test (POST) logo functionality.
- Enhanced the Secure Boot functionality.
- Enhanced the Hard Disk Drive password functionality.
- Improved the System password functionality.
- Improved the Dell Data Protection Access (DDPA) functionality.
- Improved the USB functionality at Preboot environment.
- Supports Dual In-Line Memory Modules (DIMM) isolation.
- Updated the Intel Management Engine firmware to version 8.1.30.1350.
Διαβάστε περισσότερα

Έκδοση

A12, A12

Ημερομηνία κυκλοφορίας

18 Ιουλ 2013

Τύπος λήψης

BIOS συστήματος

Κατηγορία

BIOS

Σπουδαιότητα

Recommended
Η Dell Technologies συνιστά την εφαρμογή αυτής της ενημέρωσης κατά τον επόμενο προγραμματισμένο κύκλο ενημέρωσης. Στην ενημέρωση περιλαμβάνονται αλλαγές για να διατηρηθεί η γενική εύρυθμη λειτουργία του συστήματος. Εξασφαλίζει ότι το λογισμικό του συστήματος παραμένει ενημερωμένο και συμβατό με άλλες μονάδες συστήματος (υλικολογισμικό, BIOS, προγράμματα οδήγησης και λογισμικό) και μπορεί να περιλαμβάνει κι άλλες, νέες δυνατότητες.

Πρόσθετες λεπτομέρειες

Show All | Απόκρυψη όλων
Dell Fast Boot BIOS Feature:
The Dell Windows 8 released BIOS adds a new feature that is called Fast Boot.
When upgrading from a Pre-Windows 8 released BIOS to a Windows 8 released BIOS this feature will be set in Thorough mode.
Setting this feature in minimal causes USB devices/ports to be disabled in the pre-OS environment.
If you are dependent on USB devices in the pre-OS environment this setting should remain in the Thorough mode setting.

Upgrading between Currently Released BIOS Images (Pre-Windows 8 released BIOS) and Windows 8 Feature Enhanced BIOS Images (Windows 8 released BIOS)
The new Windows 8 released BIOS contains new features and behavior, but the upgrade process for you is still unchanged.
Run the EXE application and the BIOS handles incorporating the new features and logic with your current settings.
After the upgrade, you will immediately see that one of the visible changes is the logo screen during boot, which only displays the logo at a larger size with no other information or text.
Dell Latitude E6430 (ATG)
Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.

Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from DOS (Non-Windows users)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.

Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ Latitude_E6430_X.Y.Z.exe
Where C is the drive letter of the USB device where the executable file is located and Latitude_E6430_X.Y.Z.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.

Installation
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
8. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
9. Change Legacy to UEFI Boot Option.
10. Go to Exit > Save Changes, and reboot the system.

Need help with BIOS issues?

Find a solution in Dell's BIOS troubleshooting and usage guide.

Βοήθεια και εκπαιδευτικό υλικό για προγράμματα οδήγησης