Dell Server BIOS 10G, 2.7.0

Instructions for PV500-020700C.exe

Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation
NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files.
1. Browse to the location where you downloaded the file.
2. Update the name of the file to DOS recognizable format (8.3). If you do not update the filename to 8.3 format, the filename will be truncated to 8.3 format.
3. Copy the file to the bootable device.
4. Boot the system to DOS by using the bootable device.
5. Run the executable under DOS. Follow the instructions provided by the flash utility.





Instructions for PV500-020700CB.exe:

Important Notes:

1. This utility should only be used for installing a replacement motherboard. Use of this utility for other purposes may render the current application inoperable. Please consult Dell support/services before using this utility.
2. You must download the Non-Packaged BIOS flash utility executable file in addition to this file. Both files are necessary to run this utility.

Download
1. Click the "Download Now" link to download the Board Service Utility file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link if you accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
4. Repeat steps 1 through 3 to download the Non-Packaged BIOS flash utility executable file.

Installation
NOTE: You must provide a DOS bootable media, such as a USB key. This executable file does not create the DOS system files. Both the Board Service utility executable and the NonPackaged BIOS flash utility executable files must be copied to the same bootable media.

1. Browse to the location where you downloaded the files.
2. Update the name of each file to DOS recognizable format 8.3. If you do not update the filenames to 8.3 format, they will be truncated to 8.3 format.
3. Copy the files to the bootable device.
4. Boot the system to DOS by using the bootable device.
5. Run the Board Service Utility executable under DOS, providing the flash utility executable file name as the input argument. Follow the instructions of the utility.

Example
- Non-Packaged BIOS flash utility file is renamed to flash.exe

Boot to a DOS media, and run the command "PV500-020700CB.exe flash.exe"

Dell Update Package Instructions for PVDP500-NF500_BIOS_LX_2.7.0.BIN:

Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation
1. Read over the release information presented by executing the "./PVDP500-NF500_BIOS_LX_2.7.0.BIN --version" command from the shell.
2. Download and install any prerequisites identified in the above step before proceeding.
3. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
4. Run the update by executing "./PVDP500-NF500_BIOS_LX_2.7.0.BIN" from the shell.
5. Follow the remaining prompts to perform the update.


Dell Update Package Instructions for PVDP500-NF500_BIOS_WIN_2.7.0.EXE:

Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow t