Dell PERC 6/i Adapter Firmware, v.6.3.1-0003, A14
Απαιτείται επανεκκίνηση ΑΥΤΟΜΑΤΗ ΕΓΚΑΤΑΣΤΑΣΗ Αυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.Το περιεχόμενο αυτής της σελίδας μπορεί να έχει μεταφραστέι αυτόματα. Για να υποβάλετε σχόλια, συμπληρώστε τη φόρμα στο κάτω μέρος της σελίδας.
This package provides firmware version 6.3.1-0003 for the Dell PERC6/i Adapter
Συνιστάται
Βρείτε τα καλύτερα στοιχεία λήψης για το σύστημά σας
Εισαγάγετε τις λεπτομέρειες του προϊόντος σας για να δείτε τις πιο πρόσφατες πληροφορίες για το πρόγραμμα οδήγησης του συστήματός σαςΑναζήτηση στην τοποθεσία υποστήριξης
Εισαγάγετε την ετικέτα εξυπηρέτησης ή το μοντέλο της Dell
Θέλετε να αναζητήσετε το προϊόν σας; Εισαγάγετε ένα αναγνωριστικό προϊόντος. Δείξτε μου πώς
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Συνδεθείτε στα Windows ως διαχειριστής για να χρησιμοποιήσετε τις δυνατότητες αυτόματης σάρωσης. Αν έχετε ήδη συνδεθεί ως διαχειριστής και βλέπετε αυτό το μήνυμα, κάντε επανεκκίνηση. Η διαχείριση του συστήματός σας γίνεται από τον διαχειριστή IT και οι δυνατότητες μπορεί να είναι περιορισμένες.
Βρείτε περισσότερες ενημερώσεις. Χρησιμοποιήστε το SupportAssist για να βρείτε όλες τις τελευταίες ενημερώσεις προγραμμάτων οδήγησης για τη συσκευή σας.
Fixes & Enhancements
Fixes:
- Fixes an issue where the Perc battery does not always charge up properly, causing Virtual Disks changing from Write Back to Write Through.
Enhancements:
- Removes system events that relate to partial Patrol completion on physical drives.
Διαβάστε περισσότερα- Fixes an issue where the Perc battery does not always charge up properly, causing Virtual Disks changing from Write Back to Write Through.
Enhancements:
- Removes system events that relate to partial Patrol completion on physical drives.
Έκδοση
6.3.1-0003, A14
Ημερομηνία κυκλοφορίας
06 Δεκ 2011
Τύπος λήψης
Firmware
Κατηγορία
SAS RAID
Σπουδαιότητα
RecommendedΗ Dell Technologies συνιστά την εφαρμογή αυτής της ενημέρωσης κατά τον επόμενο προγραμματισμένο κύκλο ενημέρωσης. Στην ενημέρωση περιλαμβάνονται αλλαγές για να διατηρηθεί η γενική εύρυθμη λειτουργία του συστήματος. Εξασφαλίζει ότι το λογισμικό του συστήματος παραμένει ενημερωμένο και συμβατό με άλλες μονάδες συστήματος (υλικολογισμικό, BIOS, προγράμματα οδήγησης και λογισμικό) και μπορεί να περιλαμβάνει κι άλλες, νέες δυνατότητες.
Διαθέσιμες μορφές View Important Information
Μορφή αρχείου: Update Package for Red Hat Linux
Όνομα αρχείου: SAS-RAID_Firmware_392W6_LN32_6.3.1-0003_A14.BIN
Μέγεθος αρχείου: 4.87 MB
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Περιγραφή μορφής:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Για να διασφαλίσετε την ακεραιότητα της λήψης σας, επαληθεύστε την τιμή του αθροίσματος ελέγχου.
MD5:
9ab5f1ab4eb610f8526475ace8467fb8
SHA1:
8cb6b325942500b083d4a42c6de9d4c584171f49
SHA-256:
Not available
Μορφή αρχείου: A GnuPG file which contains a cryptographic signature
Όνομα αρχείου: SAS-RAID_Firmware_392W6_LN32_6.3.1-0003_A14.BIN.sign
Μέγεθος αρχείου: 194 Bytes
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Περιγραφή μορφής:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
Για να διασφαλίσετε την ακεραιότητα της λήψης σας, επαληθεύστε την τιμή του αθροίσματος ελέγχου.
MD5:
b157de99a0f8acbc2436da9a878ad7f8
SHA1:
0af0351f951bfdac5f080d2d1d72ebb4b086e9f2
SHA-256:
Not available
Μορφή αρχείου: ZipPack External
Όνομα αρχείου: DELL_PERC-6-I-ADAPTER_A14_R313334.exe
Μέγεθος αρχείου: 1.9 MB
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Περιγραφή μορφής:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Για να διασφαλίσετε την ακεραιότητα της λήψης σας, επαληθεύστε την τιμή του αθροίσματος ελέγχου.
MD5:
732fe583963bdc5e0e96c75d248e8db5
SHA1:
f1a5084d65c28b0b832fc41517f1793e58fda908
SHA-256:
c4b08bf620e0d2c8ae9d76f0989eb5231d06b5dd93d3514c821ee8e55d2d15ed
Μορφή αρχείου: External release notes
Όνομα αρχείου: R313334.txt
Μέγεθος αρχείου: 15.07 KB
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Περιγραφή μορφής:
This file format contains plain text which can be viewed with a standard text editor.
Για να διασφαλίσετε την ακεραιότητα της λήψης σας, επαληθεύστε την τιμή του αθροίσματος ελέγχου.
MD5:
5a49fd1558500f590a91d1897a950add
SHA1:
Not available
SHA-256:
Not available
Μορφή αρχείου: Πακέτο ενημέρωσης για MS Windows 32 Bit
Όνομα αρχείου: SAS-RAID_Firmware_392W6_WN32_6.3.1-0003_A14.EXE
Μέγεθος αρχείου: 6.8 MB
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Περιγραφή μορφής:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
Για να διασφαλίσετε την ακεραιότητα της λήψης σας, επαληθεύστε την τιμή του αθροίσματος ελέγχου.
MD5:
0936309952db87855cd9a15ac9a96e5a
SHA1:
d600378f730c88a796b9b88f9a395b9610114380
SHA-256:
Not available
Κάνοντας λήψη αποδέχεστε τους όρους της Συμφωνίας άδειας χρήσης λογισμικού της Dell.
Σημαντικές πληροφορίες
1. When viewing SATA physical disk properties from Ctrl-R or other management applications, the Vendor Identification will be translated as "ATA" followed by blanks.
2. If all physical disks making up a virtual disk are removed from the system or enclosure, the RAID controller will delete the virtual disk. If the disks are later re-inserted, they will be marked foreign and can be imported using a management application.
3. If a virtual disk is configured with write-back cache enabled and some or all of its physical disks are removed from the system or enclosure, the RAID controller will preserve the virtual disk's write cache. The controller will flush the preserved cache when the physical disks are replaced and the foreign configuration is imported. Any attempt to update controller firmware will be blocked when cache is preserved for a virtual disk.
4. Physical disks determined to contain a foreign configuration are not available for configuration as a new dedicated or global hot spare, or as a member of a new virtual disk. The foreign configuration must be imported or cleared from the physical disk before it may be used as a hot spare or member of a virtual disk. Physical disks with a foreign configuration will not appear on the Create New VD screen in Ctrl-R.
5. Prior to performing a virtual disk migration to another system, the source system must be powered off before removal of the physical disks to preserve the correct virtual disk state. This is not required for the target system and the physical disks may be inserted while the system is powered on or off.
6. The controller restricts the importing of virtual disks that are undergoing RAID Level Migration or Capacity Expansion. Do not interrupt virtual disks that are performing either of these operations because it will disable the ability to import the virtual disk and the data will be unavailable. Dell recommends that the user perform a data backup before starting these operations.
7. EMM changes or drive migrations are not supported during a Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline. Dell recommends the user to perform a data backup before starting these operations.
8. This version of firmware will not ensure complete compatibility with an older version of management applications. OpenManage 5.5 or greater is recommended.
9. It is recommended that the customer upgrade the management application and device driver to the latest version available from Dell at the time of installation of this firmware.
10. Important Information for Update Packages for Microsoft Windows
a. Do not run other applications while executing Dell Update Packages.
b. Do not run storage controller update packages if the controller is in use
by other applications. The firmware upgrade may fail if any of the
RAID controllers in the system are performing I/O background tasks
(consistency checks, background initializations, rebuilds, or
reconstructions). Allow the background tasks to complete before
attempting to upgrade the firmware. Patrol Read tasks will not affect
firmware upgrades.
11. Important Information for Update Packages for Linux
a. Do not run other applications while executing Dell Update Packages.
b. If the following error occurs, "Error while loading shared libraries:
libstdc++.so.5: cannot open shared object file: No such file or
directory", you must install the compatibility libraries. These
libraries can be found on the installation media or online. To install
the compatibility libraries, use the following commands:
"rpm -ih compat-libstdc++-33-3.2.3.-*.i386.rpm" for RHEL 4 or 5
"rpm -ih compat-libstdc++-5.0.7-*.x86_64.rpm" for SLES 10
c. When Update Packages stop abruptly due to a power outage or abnormal
termination, perform the following steps:
- Remove the lock file.
- Type the following command: rm -f /var/lock/.spsetup
- Run the Update Package again to reapply the update.
d. Do not ru
2. If all physical disks making up a virtual disk are removed from the system or enclosure, the RAID controller will delete the virtual disk. If the disks are later re-inserted, they will be marked foreign and can be imported using a management application.
3. If a virtual disk is configured with write-back cache enabled and some or all of its physical disks are removed from the system or enclosure, the RAID controller will preserve the virtual disk's write cache. The controller will flush the preserved cache when the physical disks are replaced and the foreign configuration is imported. Any attempt to update controller firmware will be blocked when cache is preserved for a virtual disk.
4. Physical disks determined to contain a foreign configuration are not available for configuration as a new dedicated or global hot spare, or as a member of a new virtual disk. The foreign configuration must be imported or cleared from the physical disk before it may be used as a hot spare or member of a virtual disk. Physical disks with a foreign configuration will not appear on the Create New VD screen in Ctrl-R.
5. Prior to performing a virtual disk migration to another system, the source system must be powered off before removal of the physical disks to preserve the correct virtual disk state. This is not required for the target system and the physical disks may be inserted while the system is powered on or off.
6. The controller restricts the importing of virtual disks that are undergoing RAID Level Migration or Capacity Expansion. Do not interrupt virtual disks that are performing either of these operations because it will disable the ability to import the virtual disk and the data will be unavailable. Dell recommends that the user perform a data backup before starting these operations.
7. EMM changes or drive migrations are not supported during a Capacity Expansion or Raid Level Migration. This may cause the VDs to go offline. Dell recommends the user to perform a data backup before starting these operations.
8. This version of firmware will not ensure complete compatibility with an older version of management applications. OpenManage 5.5 or greater is recommended.
9. It is recommended that the customer upgrade the management application and device driver to the latest version available from Dell at the time of installation of this firmware.
10. Important Information for Update Packages for Microsoft Windows
a. Do not run other applications while executing Dell Update Packages.
b. Do not run storage controller update packages if the controller is in use
by other applications. The firmware upgrade may fail if any of the
RAID controllers in the system are performing I/O background tasks
(consistency checks, background initializations, rebuilds, or
reconstructions). Allow the background tasks to complete before
attempting to upgrade the firmware. Patrol Read tasks will not affect
firmware upgrades.
11. Important Information for Update Packages for Linux
a. Do not run other applications while executing Dell Update Packages.
b. If the following error occurs, "Error while loading shared libraries:
libstdc++.so.5: cannot open shared object file: No such file or
directory", you must install the compatibility libraries. These
libraries can be found on the installation media or online. To install
the compatibility libraries, use the following commands:
"rpm -ih compat-libstdc++-33-3.2.3.-*.i386.rpm" for RHEL 4 or 5
"rpm -ih compat-libstdc++-5.0.7-*.x86_64.rpm" for SLES 10
c. When Update Packages stop abruptly due to a power outage or abnormal
termination, perform the following steps:
- Remove the lock file.
- Type the following command: rm -f /var/lock/.spsetup
- Run the Update Package again to reapply the update.
d. Do not ru
Ισχύει για
PERC 5/i Adapter
PERC 6/i Adapter
Οδηγίες εγκατάστασης
NOTE: This initial section of the Installation Instructions applies only to configurations with (greater than) 2TB SEDs.
1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP).
2. Reboot for the new FW take effect
3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares.
4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost)
5. Re-assign (greater than) 2TB SED Hot Spares.
Zip pack:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your
hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully
unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
5. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.
Windows Update Package:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click Save to save the file to
your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window
before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Linux Update Package:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the
./FRMW_LX_RXXXXXX.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before
proceeding.
3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN
1. Update the firmware version to this version using preferred method below (Zip Pack, Windows DUP, Linux DUP).
2. Reboot for the new FW take effect
3. Un-assign any (greater than) 2TB SED Dedicated or Global Hot Spares in the configuration. Not all configurations have hot spares.
4. Use CTRL-R or OMSS to issue Instant Secure Erase to all un-configured (greater than) 2TB SED drives (all data in these drives will be lost)
5. Re-assign (greater than) 2TB SED Hot Spares.
Zip pack:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your
hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-click the
new file to unzip the download package
2. Click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files.
After the files are extracted the message all files were successfully
unzipped will appear.
5. Click the OK button to exit from the installer.
Installation
1. Copy extracted files to bootable media.
2. Reboot system to bootable media.
3. Execute update.bat to perform flash.
5. After flash is complete, remove bootable media.
4. Reboot system for changes to take effect.
Windows Update Package:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click Save to save the file to
your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window
before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Linux Update Package:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the
./FRMW_LX_RXXXXXX.BIN --version command from the shell.
2. Download and install any prerequisites identified in the above step before
proceeding.
3. Run the update by executing ./FRMW_LX_RXXXXXX.BIN from the shell.
4. Follow the remaining prompts to perform the update.
GnuPG Signature of Dell Update Package Instructions for FRMW_LX_RXXXXXX.BIN:
Download
1. Click the Download Now link to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Import the Dell public key. (You only need to do this once on your system.)
2. Verify the Dell Update Package by using its signature file, FRMW_LX_RXXXXXX.BIN
Βοήθεια και εκπαιδευτικό υλικό για προγράμματα οδήγησης
Για περισσότερα στοιχεία λήψης, επισκεφθείτε τη διεύθυνση Προγράμματα οδήγησης και στοιχεία λήψης. Για βοήθεια σχετικά με τη χρήση των πληροφοριών σε αυτήν τη σελίδα, επισκεφτείτε τη Βοήθεια και τα εκπαιδευτικά προγράμματα οδήγησης.