Dell PowerEdge Products C6220 & C6220 II RSTe Host RAID in support of Windows Server 2008 English 64 bit v3.1.0.1085
Απαιτείται επανεκκίνησηΑΥΤΟΜΑΤΗ ΕΓΚΑΤΑΣΤΑΣΗΑυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.
Το περιεχόμενο αυτής της σελίδας μπορεί να έχει μεταφραστέι αυτόματα. Για να υποβάλετε σχόλια, συμπληρώστε τη φόρμα στο κάτω μέρος της σελίδας.
Αυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.
Dell PowerEdge Products C6220 RSTe Host RAID support OS Windows Server 2008 English 64 bit
Συνιστάται
Βρείτε τα καλύτερα στοιχεία λήψης για το σύστημά σας
Εισαγάγετε τις λεπτομέρειες του προϊόντος σας για να δείτε τις πιο πρόσφατες πληροφορίες για το πρόγραμμα οδήγησης του συστήματός σας
Αναζήτηση στην τοποθεσία υποστήριξης
Εισαγάγετε την ετικέτα εξυπηρέτησης ή το μοντέλο της Dell
Θέλετε να αναζητήσετε το προϊόν σας; Εισαγάγετε ένα αναγνωριστικό προϊόντος.Δείξτε μου πώς
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Συνδεθείτε στα Windows ως διαχειριστής για να χρησιμοποιήσετε τις δυνατότητες αυτόματης σάρωσης. Αν έχετε ήδη συνδεθεί ως διαχειριστής και βλέπετε αυτό το μήνυμα, κάντε επανεκκίνηση.Η διαχείριση του συστήματός σας γίνεται από τον διαχειριστή IT και οι δυνατότητες μπορεί να είναι περιορισμένες.
Βρείτε περισσότερες ενημερώσεις. Χρησιμοποιήστε το SupportAssist για να βρείτε όλες τις τελευταίες ενημερώσεις προγραμμάτων οδήγησης για τη συσκευή σας.
Fixes & Enhancements
1.Provides workaround for WD 6G SAS driver issue 2.Resolves GUI/driver installation errors if no drivers attached to AHCI controller 3.S3/S4 support enabled
Η Dell Technologies συνιστά την εφαρμογή αυτής της ενημέρωσης κατά τον επόμενο προγραμματισμένο κύκλο ενημέρωσης. Στην ενημέρωση περιλαμβάνονται αλλαγές για να διατηρηθεί η γενική εύρυθμη λειτουργία του συστήματος. Εξασφαλίζει ότι το λογισμικό του συστήματος παραμένει ενημερωμένο και συμβατό με άλλες μονάδες συστήματος (υλικολογισμικό, BIOS, προγράμματα οδήγησης και λογισμικό) και μπορεί να περιλαμβάνει κι άλλες, νέες δυνατότητες.
Μορφή αρχείου:One or more self extracting disk images inside of a self extracting zip
Όνομα αρχείου:PBG_RSTe_Drivers_GUI_CIM_CLI_3.1.0.1085_2012.04.24.exe
Μέγεθος αρχείου:29.73 MB
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Περιγραφή μορφής:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
1. SAS features are enabled on SATA/SAS Capable Controller if appropriate Intel(R) RAID C600 Upgrade Key is present in the system. 2. RAID 5 is no longer supported by SATA/SAS Capable Controller when SAS features are enabled. 3. Boot through expander is not supported in legacy mode. 4. SGPIO on AHCI Capable SATA Controller is disabled by default in order to support hibernation. Fix will be in a future release. The registry key [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorA\Parameters\Device]LED_Supported"=dword:00000001" can be added but will disable hibernation. 5. Windows 2003 x86 installation is not supported. Fix will be in a future release. 6. The disk fault LEDs will not work when using the expander. Fix will be in a future release. 7. MPIO Load Balancing in RAID Mode is unsupported 8. A SAS Wide port spanning SCU0 and SCU1 is not supported. 9. Plugging both SCU into the same expander is not supported
1. In windows , click and then select 2. Select System and Security 3. Select Device Manager 4. In other devices , will find the SAS Controller with a yellow warning symbol 5. Right click the SAS Controller and select Update Driver Software 6. Select Browse my computer for driver software 7. Select Browse to navigate where the driver resides 8. Navigate to where the driver is located and select the INF from the driver folder with that has the same OS version as the system . Click Install when the system promps a Windows Security warning . 9. After the driver software is installed successfully , click Close . 10. With the installation of the new driver , the system will prompt a warning to restart the computer , please select to reboot the system .
Βοήθεια και εκπαιδευτικό υλικό για προγράμματα οδήγησης