Do not turn off your computer or disconnect from the power source while updating the BIOS as this could harm your computer. During the update, your computer will restart and you may briefly see a black screen.
Before updating, please read the installation instructions and important information noted below.
Dell OptiPlex System BIOS, A05
ΑΥΤΟΜΑΤΗ ΕΓΚΑΤΑΣΤΑΣΗΑυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.
Το περιεχόμενο αυτής της σελίδας μπορεί να έχει μεταφραστέι αυτόματα. Για να υποβάλετε σχόλια, συμπληρώστε τη φόρμα στο κάτω μέρος της σελίδας.
Αυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.
Optiplex GX240 A05 FlashBIOS
Συνιστάται
Βρείτε τα καλύτερα στοιχεία λήψης για το σύστημά σας
Εισαγάγετε τις λεπτομέρειες του προϊόντος σας για να δείτε τις πιο πρόσφατες πληροφορίες για το πρόγραμμα οδήγησης του συστήματός σας
Αναζήτηση στην τοποθεσία υποστήριξης
Εισαγάγετε την ετικέτα εξυπηρέτησης ή το μοντέλο της Dell
Θέλετε να αναζητήσετε το προϊόν σας; Εισαγάγετε ένα αναγνωριστικό προϊόντος.Δείξτε μου πώς
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Συνδεθείτε στα Windows ως διαχειριστής για να χρησιμοποιήσετε τις δυνατότητες αυτόματης σάρωσης. Αν έχετε ήδη συνδεθεί ως διαχειριστής και βλέπετε αυτό το μήνυμα, κάντε επανεκκίνηση.Η διαχείριση του συστήματός σας γίνεται από τον διαχειριστή IT και οι δυνατότητες μπορεί να είναι περιορισμένες.
Βρείτε περισσότερες ενημερώσεις. Χρησιμοποιήστε το SupportAssist για να βρείτε όλες τις τελευταίες ενημερώσεις προγραμμάτων οδήγησης για τη συσκευή σας.
Fixes & Enhancements
The following changes have been made to the A04 BIOS to create A05:
1. Added support for new Processors. 2. Fixed possible CMOS corruption when adjusting system configuration through Open Manage. 3. Updated ACPI sleep state mapping code to fix USB 2.0 devices not being found after a resume. 4. Added IDE UDMA support to speed up resume from Hibernate (when enabled). 6. Adjusted USB Emulation support for special keys, and non-US keyboards. 7. Fixed false error on Floppy Drive when running Diags From Bootable Diags CD without a Floppy Drive. 8. Fixed issues with some USB devices causing a keyboard POST error with a USB keyboard. 9. Reduce POST time when no PS/2 keyboard or Mouse installed. 10.Added two new diagnostic LED codes for better memory failure isolation. No Memory Detected (ABCD=Grn, Yel, Yel, Yel) Memory Configuration Failure (ABCD=Grn, Yel, Grn, Yel) 11.Fixed potential hang when exiting SETUP after defaulting device boot list.
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Μορφή αρχείου:One or more self extracting disk images inside of a self extracting zip
Όνομα αρχείου:Bgx24005.exe
Μέγεθος αρχείου:477 KB
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Περιγραφή μορφής:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
Για να διασφαλίσετε την ακεραιότητα της λήψης σας, επαληθεύστε την τιμή του αθροίσματος ελέγχου.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
Μορφή αρχείου:Flash BIOS executable
Όνομα αρχείου:gx240a05.exe
Μέγεθος αρχείου:303.83 KB
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Περιγραφή μορφής:
This file format consists of a BIOS-executable file. To use it, download the file and copy it to a DOS-bootable USB flash drive, then boot the system to the USB flash drive and run the program.
Non-Packaged Creating the disk: NOTE: This procedure requires one blank bootable, formatted 3.5-inch floppy disk; label the disk BIOS.
1. When the File Download window appears, click “Save this program to disk”. 2. Choose “Desktop” as the location. 3. Click “Ok”. 4. After the file has finished copying files, click “Close”. 5. Press the “Windows” + “M” keys at the same time to minimize all the open windows. 6. Insert the blank bootable formatted 3.5-inch floppy disk. 7. Right-click the copy of the file, point to “Send To”, click “3 1/2 Floppy (a)”, and then skip to the section Flashing the BIOS below.
Flashing the BIOS: NOTICE: Changing the system BIOS may result in unintended side affects, such as incompatibility of the new BIOS with installed hardware. If problems arise after a BIOS change, it may be necessary to return the system to the original version of the BIOS. 1. If you are flashing the BIOS on a portable computer, be sure that the AC adapter is plugged in and the computer is not operating on battery power. 2. Ensure that the Flash BIOS disk is inserted into the floppy disk drive. 3. Click the “Start” button, click “Shut Down”, click “Restart”, and then click “Ok”. The computer should restart and boot to the floppy disk.
NOTE: If the flash BIOS program does not start, and you see only an A:\ prompt, refer to the instructions from the Dell File Library page for the BIOS update or to the Readme.txt instructions. Generally, you will type the name of the executable flash BIOS file such as BGX1_A10.exe for BIOS version A10 on the OptiPlex™ series system.
A Press any key to continue prompt appears. 4. Press the “Enter” key. A Press Y to replace old BIOS with new BIOS prompt appears. 5. Press the “Y” key.
NOTICE: Do not interrupt the system during this process. Please refrain from pressing any keys on the keyboard, moving the mouse, or interrupting power to the system. Failure to do so could result in damage to the system BIOS.
When the computer has finished updating the BIOS, a Flash program successful. Press any key to reboot prompt appears. 6. Remove the floppy disk and press the “Enter” key. 7. The computer will now restart with the new revision of the BIOS installed. The boot screen will indicate the BIOS version.
If you encounter device or resource errors after flashing the system BIOS, enter the System Setup, clear the NVRAM and restore the system defaults. For more information, refer to Dell Knowledge Base Articles: · FA1035264 Title "How do I restore setup defaults on my Dell OptiPlex system?" · FA1035227 Title "How do I clear NVRAM on my Dell OptiPlex system?"
Floppy Disk Boot to Disk for Bgx24005.exe
Download
1. Click Download Now, to download the file. 2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears. 3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disks. 2. Double-click the new icon (it looks like a floppy diskette) on the desktop. The Self-Extractor window appears. 3. Click Setup. An black MS-DOS window appears with a message indicating that you need 1 floppy diskettes. 4. Press the [ENTER] key. A message appears prompting you to insert a blank floppy diskette. 5. Insert a floppy disk into the floppy disk drive. 6. Press the [ENTER] key. A message appears indicating that all data on the disk will be erased. 7. Press the [y] key and then press the [ENTER] key. The files are copied to
Need help with BIOS issues?
Find a solution in Dell's BIOS troubleshooting and usage guide.