Dell SAS Hard Drive Firmware Utility, SATA Hard Drive Firmware Utility, v.SAS_SATA, A09

ΑΥΤΟΜΑΤΗ ΕΓΚΑΤΑΣΤΑΣΗ Αυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.
Το περιεχόμενο αυτής της σελίδας μπορεί να έχει μεταφραστέι αυτόματα. Για να υποβάλετε σχόλια, συμπληρώστε τη φόρμα στο κάτω μέρος της σελίδας.
This is a general maintenance release for SAS and SATA drives. It is a re-release of the previous version with enhanced installation instructions.

Please see Fixes and Enhancements for information regarding an Urgent Seagate SATA release
Συνιστάται

Βρείτε τα καλύτερα στοιχεία λήψης για το σύστημά σας

Εισαγάγετε τις λεπτομέρειες του προϊόντος σας για να δείτε τις πιο πρόσφατες πληροφορίες για το πρόγραμμα οδήγησης του συστήματός σας

Αναζήτηση στην τοποθεσία υποστήριξης

Εισαγάγετε την ετικέτα εξυπηρέτησης ή το μοντέλο της Dell

Θέλετε να αναζητήσετε το προϊόν σας; Εισαγάγετε ένα αναγνωριστικό προϊόντος. Δείξτε μου πώς

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

Βρείτε περισσότερες ενημερώσεις. Χρησιμοποιήστε το SupportAssist για να βρείτε όλες τις τελευταίες ενημερώσεις προγραμμάτων οδήγησης για τη συσκευή σας.

Fixes & Enhancements

This is a general maintenance release for SAS and SATA drives. It is a re-release of the previous version with enhanced installation instructions.

All former firmware releases for all supported SAS and SATA hard drives have been compiled onto one release. Review the text file for information about fixes supported on this release

The release information in this section is specific to new firmware that has never before been released to the web. New releases added to this utility.

Releases are listed in order of Criticality:

* URGENT Releases *

1.) Seagate SATA 3.5", version MA08 for drive models ST3250310NS, ST3500320NS, ST31000340NS
and ST31000340NS.
Fixes and Enhancements
======================
Error handling:
Drive hang after power cycle resulting in inaccessible data on the drive
(refer to Seagate press release for additional detail).

To update drives attached to MD3000 and MD3000i enclosures, use R210446.

Includes several fixes for optimized error handling and stability.
Fixes to maintain SMART status error reporting preservation after a power cycle.
Hangs detected during video streams during QuickTime application

Performance:
Resolved performance degradation issue during heavy sequential write I/O.
General performance improvements for reads and for error handling events


Dell Part #DescriptionCriticality
---------------------------------
DP279 HD,1TB,SATA,3.5.SGT,MOURGENT
NN987 HD,750GB,SATA,3.5.SGT,MOURGENT
JU643 HD,500GB,SATA,3.5.SGT,MOURGENT
CX424 HD,250GB,SATA,3.5.SGT,MOURGENT

* Recommended Releases *

2.) This release will update Hitachi 15K SAS 3.5'' 300GB Hard Drives to B590, Drive model HUS154530VLS300 and Hitachi 15K SAS 3.5'' 450GB Hard Drives to D590, Dell part number: XX517, Drive model HUS154545VLS300.

Fixes and Enhancements
======================
New firmware for the Hitachi SAS 3.5" that will help improve stability and overall reliability
of these drives. During the next scheduled maintenance window,please update the drive firmware to the latest level, version B590 and D590.

Drives afected:
Dell Part #Description Criticality
---------------------- -----------
H704FHD,300GB,SAS,DU,15K,HIT,VIP+ Recommended
XX517HD,450G,SAS,DU,15K,HIT,VIP+ Recommended

3.) Seagate 15k6 SAS, 3.5" version HS0A for drive models ST3146356SS, ST3300656SS,and ST3450856SS.

Fixes and Enhancements
======================
Error handling:
Multiple improvements for handling and recovering from various reset conditions.
Fixes for low probability drive timeouts or hang conditions.
Fix for offline or SMART trip drives configured in a RAID10.
Fix for no drive found error message during a reboot.

Performance:
Sequential write performance degraded after writing to a reassigned sector
Improvements for sequential read performance under heavy IO
Performance Issue When Transitioning From Sequential Writes to Sequential Reads

Dell Part #DescriptionCriticality
---------------------------------
XX518HD,146G,SAS,DU,15K,3.5,SGT,HURRecommmended
FM501HD,450G,SAS,DU,15K,3.5,SGT,HURRecommended
YP778HD,300G,SAS,DU,15K,3.5,SGT,HURRecommended

4.)Seagate NS SAS 3.5", version MS05 for drive models ST31000640SS, ST3750630SS, and ST3500620SS

Fixes and Enhancements
======================
Multiple improvements for handling and recovering from various reset conditions.
Fixes for low probability drive timeouts or hang conditions.
Fix for offline or SMART trip drives configured in a RAID10.
Fix for no drive found error message during a reboot.

Performance:
Sequential write performance degraded after writing to a reassigned sector
Improvements for sequential read performance under heavy IO
Performance Issue When Transitioning From Sequential Writes to Sequential Reads

Dell Part #DescriptionCriticality
---------------------------------
CP464HD,1TRB,NL,DU,7.2K,3
Διαβάστε περισσότερα

Έκδοση

SAS_SATA, A09

Ημερομηνία κυκλοφορίας

15 Αυγ 2012

Τύπος λήψης

Utility

Κατηγορία

Μονάδα SAS

Σπουδαιότητα

Recommended
Η Dell Technologies συνιστά την εφαρμογή αυτής της ενημέρωσης κατά τον επόμενο προγραμματισμένο κύκλο ενημέρωσης. Στην ενημέρωση περιλαμβάνονται αλλαγές για να διατηρηθεί η γενική εύρυθμη λειτουργία του συστήματος. Εξασφαλίζει ότι το λογισμικό του συστήματος παραμένει ενημερωμένο και συμβατό με άλλες μονάδες συστήματος (υλικολογισμικό, BIOS, προγράμματα οδήγησης και λογισμικό) και μπορεί να περιλαμβάνει κι άλλες, νέες δυνατότητες.
Διαθέσιμες μορφές View Important Information

Μορφή αρχείου: External release notes
Όνομα αρχείου: R211868.txt
Μέγεθος αρχείου: 28.11 KB
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Περιγραφή μορφής:
This file format contains plain text which can be viewed with a standard text editor.
Για να διασφαλίσετε την ακεραιότητα της λήψης σας, επαληθεύστε την τιμή του αθροίσματος ελέγχου.
MD5:
fb17c200662d436fe5b3af02ef2e47bc
SHA1:
Not available
SHA-256:
Not available

Μορφή αρχείου: ZipPack External
Όνομα αρχείου: DELL_MULTI-DEVICE_A09_R211868.exe
Μέγεθος αρχείου: 37.72 MB
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Περιγραφή μορφής:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
Για να διασφαλίσετε την ακεραιότητα της λήψης σας, επαληθεύστε την τιμή του αθροίσματος ελέγχου.
MD5:
0aeb1b488e3cfe2364af187b37f0fe18
SHA1:
8c42664133e96a1c53b5d31543acc11ab363ad81
SHA-256:
fb647834596084f8c282e1c441a99188a2a78d93cdf221f4d8b8d375eebe4c55

Κάνοντας λήψη αποδέχεστε τους όρους της Συμφωνίας άδειας χρήσης λογισμικού της Dell.

Πρόσθετες λεπτομέρειες

Show All | Απόκρυψη όλων
"This release is intended for use on drives attached to SAS/ PERC controllers and MD1000 Enclosures. To update drives attached to MD3000 and MD3000i enclosures, use R210446"

Please note: Only Dell Branded SAS/SCSI and PERC controllers are supported. Embedded SATA controllers are not supported.

On drives attached to PERC5/PERC6 controllers, the first drive to be updated requires a 5 minute delay before firmware flash to begin. Do not power cycle or reboot your system while the update is in progress.
Dell SAS/SATA Hard Drive
Download

1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.

Detailed Instructions

1) Click Download now.
The File Download window appears.

2) Click the Save button.
The Save As window appears.

3) Select Desktop using the drop-down menu to the right of Save in.

4) Click the Save button.
A progress meter moves as the download is completed.

5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.

6) Double click the Icon on your desktop for the newly saved file.

Βοήθεια και εκπαιδευτικό υλικό για προγράμματα οδήγησης