Απαιτείται επανεκκίνησηΑΥΤΟΜΑΤΗ ΕΓΚΑΤΑΣΤΑΣΗΑυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.
Το περιεχόμενο αυτής της σελίδας μπορεί να έχει μεταφραστέι αυτόματα. Για να υποβάλετε σχόλια, συμπληρώστε τη φόρμα στο κάτω μέρος της σελίδας.
Αυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.
This package provides the Micron RealSSD C400 128GB/256GB/512GB 2.5" 7MM Firmware Update and is supported on Alienware, Inspiron, Latitude, XPS Notebook, OptiPlex, Precision and Vostro Notebook models that are running the following Windows Operating Systems: Windows 7 and Windows 8.
Συνιστάται
Βρείτε τα καλύτερα στοιχεία λήψης για το σύστημά σας
Εισαγάγετε τις λεπτομέρειες του προϊόντος σας για να δείτε τις πιο πρόσφατες πληροφορίες για το πρόγραμμα οδήγησης του συστήματός σας
Αναζήτηση στην τοποθεσία υποστήριξης
Εισαγάγετε την ετικέτα εξυπηρέτησης ή το μοντέλο της Dell
Θέλετε να αναζητήσετε το προϊόν σας; Εισαγάγετε ένα αναγνωριστικό προϊόντος.Δείξτε μου πώς
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Συνδεθείτε στα Windows ως διαχειριστής για να χρησιμοποιήσετε τις δυνατότητες αυτόματης σάρωσης. Αν έχετε ήδη συνδεθεί ως διαχειριστής και βλέπετε αυτό το μήνυμα, κάντε επανεκκίνηση.Η διαχείριση του συστήματός σας γίνεται από τον διαχειριστή IT και οι δυνατότητες μπορεί να είναι περιορισμένες.
Βρείτε περισσότερες ενημερώσεις. Χρησιμοποιήστε το SupportAssist για να βρείτε όλες τις τελευταίες ενημερώσεις προγραμμάτων οδήγησης για τη συσκευή σας.
Fixes & Enhancements
Fixes - Fixed issues where SSD may not be detected after a previous forced power cycle.
Enhancements - Enhanced the device ready time, allowing system to be able to power up quickly.
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
1. Equipment needed, a CD drive, a blank CD. 2. Do not POWER OFF the system during the firmware update procedure. 3. Please perform a full system backup before starting the firmware update procedure (highly recommended). 4. Connect your notebook to a AC power supply during the firmware update procedure (highly recommended). 5.The firmware utility tool is OS independent.
Backup 1. It is highly recommended that full system backup be completed before starting this firmware upgrade procedure.
Download and image extraction 1. Click Download File to download the zipped file. 2. Extract the file into a folder. 3. The ISO image file is used to burn the utility onto a bootable CD.
Installation 1. Ensure that your notebook is plugged into a AC power supply during the update process (high recommended). 2. DO NOT remove power from the system during the firmware update process. 3. Ensure that your BIOS has been set to ATA or AHCI mode. DO NOT select RAID mode. This utility will not work in RAID mode. 4. Ensure that your BIOS boot order has been set up to boot from CD drive a. You can do so by either pressing F12 during the boot up and then select CD drive to boot from b. Or by pressing F2 during the boot up, enter the boot order selection and select CD drive to boot from. Save the setting before exiting. 5. Insert the bootable CD media with ISO image into your system. 6. Reboot the system from the bootable CD media, the firmware update utility will be started automatically. 7. Connected Micron SSD drive that is eligible for the firmware update will be shown on the screen. 8. Select Yes to the request 'Update firmware on this drive?' 9. DO NOT power off the system during the update process, the update will take about 30 to 60 seconds. Some systems may require a longer time to complete. 10. Upon completion, the message 'Current Firmware is: 040H' will be displayed.
Βοήθεια και εκπαιδευτικό υλικό για προγράμματα οδήγησης