ΑΥΤΟΜΑΤΗ ΕΓΚΑΤΑΣΤΑΣΗΑυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.
Το περιεχόμενο αυτής της σελίδας μπορεί να έχει μεταφραστέι αυτόματα. Για να υποβάλετε σχόλια, συμπληρώστε τη φόρμα στο κάτω μέρος της σελίδας.
Αυτό το αρχείο εγκαταστάθηκε αυτόματα στο πλαίσιο μιας πρόσφατης ενημέρωσης. Αν αντιμετωπίζετε κάποιο πρόβλημα, μπορείτε να κάνετε μη αυτόματη λήψη και επανεγκατάσταση.
Firmware update for the LG DVD-ROM drive only!
Συνιστάται
Βρείτε τα καλύτερα στοιχεία λήψης για το σύστημά σας
Εισαγάγετε τις λεπτομέρειες του προϊόντος σας για να δείτε τις πιο πρόσφατες πληροφορίες για το πρόγραμμα οδήγησης του συστήματός σας
Αναζήτηση στην τοποθεσία υποστήριξης
Εισαγάγετε την ετικέτα εξυπηρέτησης ή το μοντέλο της Dell
Θέλετε να αναζητήσετε το προϊόν σας; Εισαγάγετε ένα αναγνωριστικό προϊόντος.Δείξτε μου πώς
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Συνδεθείτε στα Windows ως διαχειριστής για να χρησιμοποιήσετε τις δυνατότητες αυτόματης σάρωσης. Αν έχετε ήδη συνδεθεί ως διαχειριστής και βλέπετε αυτό το μήνυμα, κάντε επανεκκίνηση.Η διαχείριση του συστήματός σας γίνεται από τον διαχειριστή IT και οι δυνατότητες μπορεί να είναι περιορισμένες.
Βρείτε περισσότερες ενημερώσεις. Χρησιμοποιήστε το SupportAssist για να βρείτε όλες τις τελευταίες ενημερώσεις προγραμμάτων οδήγησης για τη συσκευή σας.
Fixes & Enhancements
The firmware revision 1.13 corrects a software hang at the "Scanning tracks" screen with Adaptec EZ-CD Creator which is encountered when Copying a CD-Extra, CD-Plus, or Enhanced CD media (or any CD media with Audio and Data content).
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Μορφή αρχείου:One or more self extracting disk images inside of a self extracting zip
Όνομα αρχείου:DLGDVD01.exe
Μέγεθος αρχείου:388.5 KB
Αυτό είναι μεγάλο αρχείο. Ανάλογα με την ταχύτητα της σύνδεσής σας, η λήψη μπορεί να διαρκέσει λίγη ώρα.
Περιγραφή μορφής:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
To uprade the firmware on your LG DVD-ROM to version 1.13 drive perform the following steps.
NOTE: To perform this upgrade you will need to have your DVD-ROM and floppy disk drive connected to your computer. For instructions on how to attach your floppy drive externally, see your system documentation.
Make sure that your computer is plugged in to AC power before attempting this upgrade!
Step 1) After you have downloaded the firmware update, locate and double click on the DLGDVD01.exe file.
Step 2) Insert a blank formatted floppy diskette into drive A: and click "Setup".
Step 3) After clicking "Setup," follow the onscreen prompts and the files will be automatically extracted to drive A:.
Step 4) After extracting the files, restart your computer with the floppy diskette in the drive. If your system does not boot from the LG DVD-ROM firmware upgrade diskette, see your system documentation regarding changing the "Boot Sequence" in your system bios.
Step 5) The firmware upgrade process will begin automatically. During the firmware upgrade process you will see a progress bar with the firmware update status. Once it has completed, you will see a message with the updated drive information. If you recieve a message stating "Current drive is not supported..", your drive is not an LG DVD-ROM or is not the correct model of LG DVD-ROM drive and this upgrade is not applicable to your drive. Do not unplug or turn off your machine while the upgrade is being performed!
Step 6) After the firmware upgrade process is complete, remove the floppy diskette from the drive and restart the computer.
After restarting, the operating system may re-detect the drive and prompt another restart.
To confirm that the firmware upgrade was completed properly, perform the following steps.
Step 1) To view the firmware revision of the DVD-ROM drive you will need to look in Windows Device Manager.
Step 2) In Windows 98SE, or Windows Millenium Edition you can access the Device Manager by first right clicking on your "My Computer" icon. Next, click on the "Device Manager" tab. Next, click on the "+" next to "CDROM". Once you have clicked on the "+" next to "CDROM" double click on "LG DVD-ROM". Next, click on the settings tab. The "Firmware revision:" in the upper right hand corner should now be "1.13". If the revision number still shows 1.11 or earlier, run through the firmware upgrade steps again.
In Windows 2000, it will be necessary to locate the new firmware version in the LG status window during the flash process, as Windows 2000 lacks a means to report the firmware version.
Βοήθεια και εκπαιδευτικό υλικό για προγράμματα οδήγησης