Dell PowerVault MD 32/36 Series Storage Controller Firmware and NVSRAM firmware version 08.20.21.61
需要重新啟動 已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
Dell PowerVault MD32/MD36 Series Storage Array, including firmware for MD12x0 attached to MD32/MD36 series array.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes:
Enclosure ID changing to 48 on extension arrays
Last character missing from service tag on dense array when using SymbolSDK
Controller reboot during online drive firmware update might cause data inconsistency
During heavy I/O, Online Drive Firmware Update might cause dropped writes
Controller reboot when disabling Data Assurance on a Thin Volume with SSD Cache enabled
In a clustered environment, with a large number of volumes being reserved per host, an additional controller reboot occurred during online RAID controller download
Asynch replication placed offline during volume expansion and volume ownership change
XCOPY on thin volume hangs and controller reboots during thin volume expansion
Controller reboot caused by repeated bus reset or target reset from hosts
Enhancements:
None
閱讀更多Enclosure ID changing to 48 on extension arrays
Last character missing from service tag on dense array when using SymbolSDK
Controller reboot during online drive firmware update might cause data inconsistency
During heavy I/O, Online Drive Firmware Update might cause dropped writes
Controller reboot when disabling Data Assurance on a Thin Volume with SSD Cache enabled
In a clustered environment, with a large number of volumes being reserved per host, an additional controller reboot occurred during online RAID controller download
Asynch replication placed offline during volume expansion and volume ownership change
XCOPY on thin volume hangs and controller reboots during thin volume expansion
Controller reboot caused by repeated bus reset or target reset from hosts
Enhancements:
None
繁體中文版
08.20.21.61, A17
發佈日期
25 1月 2017
下載類型
韌體
類別
儲存控制器
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式 檢視重要資訊
檔案格式： 影像的基礎驅動程式
檔案名稱： PowerVault_MD32_MD36_Series_Firmware_08_20_21_61.zip
檔案大小： 301.51 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
為了確保下載的完整性，請驗證總和檢查值。
MD5：
14ab2813e92d98ad23e278e75335f7a7
SHA1：
622aee0dc8dfb0e4f7003f2326258ebf0c0bf4a9
SHA-256：
9dd3628390663ebf92900abf074803051a0aa0a2c392c076ba3a1ec3bafe3c5c
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
*** ATTENTION ***
If your PowerVault MD32xx/MD36xx series storage array is currently running a firmware version lower than 07.75.28.60, you cannot directly install the RAID controller firmware version 08.20.21.61 included in this release.
Instead, you must first install the bridge firmware version 07.75.28.60. After the bridge firmware is successfully installed, you can then install RAID controller firmware 08.20.21.61
If your PowerVault MD32xx/MD36xx series storage array is currently running a firmware version lower than 07.75.28.60, you cannot directly install the RAID controller firmware version 08.20.21.61 included in this release.
Instead, you must first install the bridge firmware version 07.75.28.60. After the bridge firmware is successfully installed, you can then install RAID controller firmware 08.20.21.61
支援的作業系統
Novell SuSE Linux ES 11
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 7
Windows Storage Server 2012 R2
SUSE Linux ES 12
Windows Server 2012 R2
Windows 7, 64-bit
Windows 8, 64-bit
Windows 8.1, 64-bit
Windows Server 2008 R2
Windows Server 2016
Windows 10, 64-bit
VMware ESXi 5.1
VMware ESXi 5.5
VMware ESXi 6.0
VMware ESXi 6.5
適用於
MD3 Series Controller Firmware Updates
安裝指示
*** WARNING ***
If you have a single controller PowerVault MD32/MD36 series storage array you must stop all I/O operations before starting the RAID controller firmware upgrade.
Specifically, follow these steps:
1. ***IMPORTANT*** Install the latest Dell PowerVault MD Storage Manager (MDSM) software from the Resource DVD. Must be at least version 6.4.0.4 or higher.
NOTE: It is recommended that you install all the latest updates available at www.dell.com/support
2. Extract the following files from the Bridge_Firmware_07_75_28_60.zip archive:
* Bridge_Firmware_07_75_28_60.dlp
3. Download and activate RAID controller bridge firmware version 07.75.28.60 (contained in the Bridge_Firmware_07_75_28_60.dlp file)
4. Once the bridge firmware installation is successfully completed, wait at least 30 minutes to allow the attached hosts to re-discover the storage array.
5. Download and activate the RAID controller firmware version 08.20.21.60 together with the NVSRAM configuration file version using the Dell PowerVault MD Storage Manager for your corresponding array type.
If you have a single controller PowerVault MD32/MD36 series storage array you must stop all I/O operations before starting the RAID controller firmware upgrade.
Specifically, follow these steps:
1. ***IMPORTANT*** Install the latest Dell PowerVault MD Storage Manager (MDSM) software from the Resource DVD. Must be at least version 6.4.0.4 or higher.
NOTE: It is recommended that you install all the latest updates available at www.dell.com/support
2. Extract the following files from the Bridge_Firmware_07_75_28_60.zip archive:
* Bridge_Firmware_07_75_28_60.dlp
3. Download and activate RAID controller bridge firmware version 07.75.28.60 (contained in the Bridge_Firmware_07_75_28_60.dlp file)
4. Once the bridge firmware installation is successfully completed, wait at least 30 minutes to allow the attached hosts to re-discover the storage array.
5. Download and activate the RAID controller firmware version 08.20.21.60 together with the NVSRAM configuration file version using the Dell PowerVault MD Storage Manager for your corresponding array type.