Seagate SAS ST9500431SS firmware version DSF4.
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
This release contains firmware version DSF4 (FIPS140/SED Enabled) for Seagate SAS (7.2K rpm 2.5" SAS) 500GB Hard Drive. Vendor model number ST9500431SS.
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes / Enchancements:
- Fixed issue when hard reset occurred on port other than which data transfer was taking place
- Improved error handling when Notify Power Loss Expected sequence is initiated
- Improved performance of write operations in extreme temperature environments.
- Improved drive error handling
- Improved long term reliability of drive.
- Improved performance related to SED commands
閱讀更多- Fixed issue when hard reset occurred on port other than which data transfer was taking place
- Improved error handling when Notify Power Loss Expected sequence is initiated
- Improved performance of write operations in extreme temperature environments.
- Improved drive error handling
- Improved long term reliability of drive.
- Improved performance related to SED commands
繁體中文版
DSF4, A01
發佈日期
25 4月 2012
下載類型
韌體
類別
SAS 硬碟
重要性
緊急Dell Technologies 強烈建議儘快套用此重要更新。此更新包含的重大錯誤修正和變更,可改善 Dell 系統功能、可靠性及穩定性。其也可能包含安全性修正和其他增強功能。
檔案格式: 適用於 MS Windows (32 位元) 的更新套件
檔案名稱: SAS-Drive_Firmware_H1TYD_WN32_DSF4_A01.EXE
檔案大小: 11.25 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計,可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時,請務必選擇適用您作業系統的更新。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
dfe181e4607c05028916604ade786978
SHA1:
033215278f4e65fa4d2b90f072755e74ea43d28a
SHA-256:
1a1fc7aa6a664bd9fff5502a6f70c016b9af1273264dd3613aa0072da40140a6
檔案格式: 包含密碼編譯簽章的 GnuPG 檔案
檔案名稱: SAS-Drive_Firmware_H1TYD_LN32_DSF4_A01.BIN.sign
檔案大小: 189 Bytes
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
您可以使用適用於 Red Hat Linux 更新套件的 GnuPG 簽章,在相關聯的 Red Hat Linux 更新套件中驗證 Dell 的身分。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
bcb8d2b39eb2c09bcb0bfe2f21346f11
SHA1:
1978f2911b2ff8b2cc68c700bf396545bb1e7eec
SHA-256:
908ddc100a9865cd70daa4840fcebefd138f1a64f70411642b3d1a753fd27dc8
檔案格式: 適用於 Red Hat Linux 的更新套件
檔案名稱: SAS-Drive_Firmware_H1TYD_LN32_DSF4_A01.BIN
檔案大小: 9.98 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
適用於 Linux 的 Dell 更新套件可做為獨立的應用程式,確保符合特定的驗證條件,然後套用更新。
注意:適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案,瞭解詳情。
注意:適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案,瞭解詳情。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
8e6e4e4bc3c87fd568ba41a559bf7714
SHA1:
62585a38ca39e832b08ed4e0d3b7c0de19b3293c
SHA-256:
9c843c91dad4f810c99f9bfb514fe96ce547702ad365e2ae025328a2361a7bdf
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
Important Information - External:
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
Novell SuSE Linux ES 11
Windows Server 2008 x64
Red Hat® Enterprise Linux 4.5
Red Hat® Enterprise Linux 4.6
SuSE Linux ES 9
Suse Linux ES 9
Suse Linux ES 10
Red Hat® Enterprise Linux 4.5
Red Hat® Enterprise Linux 4.7
Red Hat® Enterprise Linux 5.2
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 5
Novell SuSE Linux ES 10
Windows Server 2008 x86
Windows Server 2003
Windows Server 2008 R2
Windows Server 2003 x64
DRAGONFLY NL6,FIPS, 2.5", 7.2K,SAS, 500GB
HD,500G,NL6,7.2K,3.5,SGT-DF
Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.