Adaptec PERC2, PERC2/Si, PERC3/Si, PERC3/Di, v.2.8.0.6075, A12
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This software contains the Windows NT4 driver for the DELL PERC 2, PERC 2/Si, PERC 3/Si, and PERC 3/Di controllers.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。
您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes/Enhancements
==================
-Filter driver checks Dispatch_Level before calling KeWaitForSingleObject avoid bugcheck 0xB8
-Modified unknown AIF handling to prevent Driver Verifier hang.
-STATUS_INVALID_PARAMETER returned for requests with: Zero-length input buffer size.Invalid input buffer size, i.e. not the size of the expected structure.
Invalid memory address for the input buffer.A null input buffer.
-Deletes perc2hib reference in lower filter list rather than entire filter list via inf.
-Corrected a major entry-point in the filter driver that Windows uses for major Plug-N-Play requests (IRP_MJ_PNP). This entry point was incorrectly passing the request to the next lower device in the device stack.
-Deleted the section that removes the upper and lower filters. This section caused errors to be logged in the setupapi.log in Windows.
-Added support for new vSCSI implementation
閱讀更多
==================
-Filter driver checks Dispatch_Level before calling KeWaitForSingleObject avoid bugcheck 0xB8
-Modified unknown AIF handling to prevent Driver Verifier hang.
-STATUS_INVALID_PARAMETER returned for requests with: Zero-length input buffer size.Invalid input buffer size, i.e. not the size of the expected structure.
Invalid memory address for the input buffer.A null input buffer.
-Deletes perc2hib reference in lower filter list rather than entire filter list via inf.
-Corrected a major entry-point in the filter driver that Windows uses for major Plug-N-Play requests (IRP_MJ_PNP). This entry point was incorrectly passing the request to the next lower device in the device stack.
-Deleted the section that removes the upper and lower filters. This section caused errors to be logged in the setupapi.log in Windows.
-Added support for new vSCSI implementation
繁體中文版
2.8.0.6075, A12
發佈日期
14 4月 2004
下載類型
驅動程式
類別
SCSI RAID
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式
檢視重要資訊
檔案格式：
將檔案直接解壓縮至本機磁碟
檔案名稱：
nta12drv.exe
檔案大小：
167.08 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案格式內含檔案封存，且該封存可能會解壓縮到硬碟上的目錄。接著就可以在該目錄中完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
不適用
SHA1：
不適用
SHA-256：
不適用
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
This software code release requires all V2.8 components: firmware,
device driver and management utilities. Using some components from previous
releases may cause some unknown errors.
device driver and management utilities. Using some components from previous
releases may cause some unknown errors.
適用於
PERC3/Di
安裝指示
Custom Instructions for nta12drv.exe:
Driver Installation for Windows NT 4.0
==============================================
To perform a fresh installation of the Windows NT device drivers
for the controller, follow these steps:
1. Boot the system using the Windows NT 4.0 CD.
2. When the message: "Setup is inspecting your computer's hardware
configuration" appears, press F6 immediately.
3. The Windows NT 4.0 Setup screen will appear, requesting
input for additional adapters in the system. Press 'S' to
specify an additional adapter.
4. A selection menu will appear. Scroll to "Other" and hit
ENTER.
5. Insert the driver diskette and press ENTER when prompted.
6. The selection:
"DELL PERC 2, 2/Si, 3/Si, 3/Di RAID CONTROLLERS"
will appear, hit ENTER.
7. After the driver has loaded, press ENTER to continue the installation.
NOTE: Before you perform the upgrade, uninstall the
Controller Management Software (FAST and the CLI).
See the installation guide associated with your
controller for instructions on how to uninstall the
Controller Management Software.
To upgrade the Windows NT device drivers for the controller,
follow these steps:
1. Follow this path from Start:
Start -> Settings -> Control Panel -> SCSI Adapters -> Drivers
2. Click on 'ADD' in the Driver window.
3. The system displays an "Install Driver" window.
Select "Have Disk".
4. The system displays an "Install From Disk" window.
The "Install Driver" window instructs you to insert
the manufacturer's installation media into the drive
and click < Ok>. In this case, insert the diskette
that contains the NT device drivers for your
controller
5. Enter the drive and location of the files. The
default location on the diskette that contains the NT
device drivers is: "a:\".
The system displays a message identifying the
controller for which you want to upgrade the Windows
NT device drivers. The message requests that you
click the button.
6. The system displays "System Settings Change" and asks
if you want to restart the computer. Press YES.
Driver Installation for Windows NT 4.0
==============================================
To perform a fresh installation of the Windows NT device drivers
for the controller, follow these steps:
1. Boot the system using the Windows NT 4.0 CD.
2. When the message: "Setup is inspecting your computer's hardware
configuration" appears, press F6 immediately.
3. The Windows NT 4.0 Setup screen will appear, requesting
input for additional adapters in the system. Press 'S' to
specify an additional adapter.
4. A selection menu will appear. Scroll to "Other" and hit
ENTER.
5. Insert the driver diskette and press ENTER when prompted.
6. The selection:
"DELL PERC 2, 2/Si, 3/Si, 3/Di RAID CONTROLLERS"
will appear, hit ENTER.
7. After the driver has loaded, press ENTER to continue the installation.
NOTE: Before you perform the upgrade, uninstall the
Controller Management Software (FAST and the CLI).
See the installation guide associated with your
controller for instructions on how to uninstall the
Controller Management Software.
To upgrade the Windows NT device drivers for the controller,
follow these steps:
1. Follow this path from Start:
Start -> Settings -> Control Panel -> SCSI Adapters -> Drivers
2. Click on 'ADD' in the Driver window.
3. The system displays an "Install Driver" window.
Select "Have Disk".
4. The system displays an "Install From Disk" window.
The "Install Driver" window instructs you to insert
the manufacturer's installation media into the drive
and click < Ok>. In this case, insert the diskette
that contains the NT device drivers for your
controller
5. Enter the drive and location of the files. The
default location on the diskette that contains the NT
device drivers is: "a:\".
The system displays a message identifying the
controller for which you want to upgrade the Windows
NT device drivers. The message requests that you
click the button.
6. The system displays "System Settings Change" and asks
if you want to restart the computer. Press YES.