NEC NR-7900A HH 24X CD-RW, v.109B, A01
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
Firmware update for NEC NR-7900A 24x CD-RW drive; Dell P/n: 6J118, 7J385
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
This firmware resolved an issue where the NEC NR-7900A drive has problem
writing on Sony 32x CD-R Media
閱讀更多writing on Sony 32x CD-R Media
繁體中文版
109B, A01
發佈日期
19 11月 2002
下載類型
韌體
類別
移動存儲裝置
重要性
選用Dell Technologies 建議您檢閱此更新,以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態,或其提供的新功能不一定適用於您的環境。
檔案格式: 自動解壓縮 zip 檔之中有一個以上的自動解壓縮磁碟影像
檔案名稱: D6J11801.exe
檔案大小: 465 KB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾,然後按兩下以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
不適用
SHA1:
不適用
SHA-256:
不適用
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
NR-7900A HH 24X CD-RW
Default Instructions for D6J11801.exe:
Follow these steps to install.
You will need a blank formatted 1.44MB floppy disk to proceed with the
flashing process.
1. Download the D6J11801.exe file from the Dell website to a known
directory.
2. Place a known good formatted floppy disk in your floppy disk drive.
3. Navigate to the directory and Double-click on the file you just
downloaded.
4. Follow the on screen instructions to create a flash floppy disk.
5. Once the flash disk has been created, restart your computer with the
floppy in drive A. The flash process will begin automatically.
6. Follow the instructions provided by the flash disk.
7. Once the flash process has been completed successfully, remove the
diskette and reboot the system.
*** Make sure that there are no power interruptions during the flash
process***
Follow these steps to install.
You will need a blank formatted 1.44MB floppy disk to proceed with the
flashing process.
1. Download the D6J11801.exe file from the Dell website to a known
directory.
2. Place a known good formatted floppy disk in your floppy disk drive.
3. Navigate to the directory and Double-click on the file you just
downloaded.
4. Follow the on screen instructions to create a flash floppy disk.
5. Once the flash disk has been created, restart your computer with the
floppy in drive A. The flash process will begin automatically.
6. Follow the instructions provided by the flash disk.
7. Once the flash process has been completed successfully, remove the
diskette and reboot the system.
*** Make sure that there are no power interruptions during the flash
process***