NAUTILUS,DOS,A37
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This is a general maintenance release for SAS and SATA drives. It is a re-release of the previous version with additional firmware updates.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes and Enhancements
The Hitachi SAS release for 15K 3.5" SAS hard drive firmware to fix Linux install hang in a RAID-0 config.
During a Linux install small block sequential writes occur which brings out this bug and result in a hang
during install when attached to SAS-5/iR running in RAID 0. The firmware will rev from A48B to A5F0.
閱讀更多The Hitachi SAS release for 15K 3.5" SAS hard drive firmware to fix Linux install hang in a RAID-0 config.
During a Linux install small block sequential writes occur which brings out this bug and result in a hang
during install when attached to SAS-5/iR running in RAID 0. The firmware will rev from A48B to A5F0.
繁體中文版
A37, A37
發佈日期
24 7月 2012
下載類型
公用程式
類別
SAS 硬碟
重要性
選用Dell Technologies 建議您檢閱此更新，以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態，或其提供的新功能不一定適用於您的環境。
可用的格式 檢視重要資訊
檔案格式： ZipPack 外接
檔案名稱： NautilusA37_ZPE.exe
檔案大小： 92.04 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
ebf2228c469cf716453d7a6f1ec5618c
SHA1：
22a40adc9546400d8ba25a9203658555e2d80d5c
SHA-256：
336befa0995a856ae4f1549f052a53f34af090d1ef48c63477c6ece94dfe607e
檔案格式： 外部版本資訊
檔案名稱： Release Notes A37.txt
檔案大小： 69.96 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案格式內含純文字，可使用標準文字編輯器予以檢視。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
39f8b51bb1479f2344611f59d70d29a8
SHA1：
113fb73dafd3426f8508dfbc22677e25a84e5d77
SHA-256：
0eb11ccc864e1e2c7b3d4b2c8818f0abfe2fbb5cb63ba937fcca9dea261b99b3
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
Important Information - External:
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
適用於
Dell SAS/SATA Hard Drive
安裝指示
Dell Update Package Instructions:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
NOTE: In order to create the Hard drive firmware update media using this package, this file must be downloaded to and executed on a system running Microsoft Windows. This package can be used to create a bootable USB flash drive, CD, or hard drive image.
Download
1. Select the download method you want to use to retrieve the file - either HTTP or FTP.
2. If the Export Compliance Disclaimer window appears, read the agreement and then select either "I agree" or "I disagree".
3. When the File Download window appears, click Save.
4. From the Save As dialog, select a location and a file name then click "Save".
5. If a Download Complete window appears, click Close.
Hard Drive Firmware Media Creation
1. Browse to the location where you downloaded the file and double-click it to extract the diagnostic files and start the distribution application.
2. Verify that you have the correct diagnostic package by reviewing the information on the dialog box that appears then click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files. After the files are extracted, a message should appear indicating that all files were successfully unzipped.
5. Click the OK button to start the Hard Drive Firmware Package. Follow the on screen prompts to create the media desired.
CD Media Creation
1. Follow your CD writing software vendor's instructions to create a CD from the downloaded .ISO file.
Note: If CD media is viewed using Windows explorer, only the file Booting.txt will be visible. This CD was created using hard-disk emulation.
Running the Hard Drive Firmware Update Utility
1. Insert the media you created.
2. Boot the computer. (You may have to configure the boot order in BIOS setup to boot the media you created before other devices.)
3. Follow the screen prompts to update your drive firmware.
There will be a readme.txt file for DDDP usage and a text file for drives affected in the location you selected tounzip the files that contains additional and late breaking information. If you need to run the Delivery Package again, you can run the file DDDP.exe from that same location.
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
1) Click Download now.
The File Download window appears.
2) Click the Save button.
The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button.
A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.
NOTE: In order to create the Hard drive firmware update media using this package, this file must be downloaded to and executed on a system running Microsoft Windows. This package can be used to create a bootable USB flash drive, CD, or hard drive image.
Download
1. Select the download method you want to use to retrieve the file - either HTTP or FTP.
2. If the Export Compliance Disclaimer window appears, read the agreement and then select either "I agree" or "I disagree".
3. When the File Download window appears, click Save.
4. From the Save As dialog, select a location and a file name then click "Save".
5. If a Download Complete window appears, click Close.
Hard Drive Firmware Media Creation
1. Browse to the location where you downloaded the file and double-click it to extract the diagnostic files and start the distribution application.
2. Verify that you have the correct diagnostic package by reviewing the information on the dialog box that appears then click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files. After the files are extracted, a message should appear indicating that all files were successfully unzipped.
5. Click the OK button to start the Hard Drive Firmware Package. Follow the on screen prompts to create the media desired.
CD Media Creation
1. Follow your CD writing software vendor's instructions to create a CD from the downloaded .ISO file.
Note: If CD media is viewed using Windows explorer, only the file Booting.txt will be visible. This CD was created using hard-disk emulation.
Running the Hard Drive Firmware Update Utility
1. Insert the media you created.
2. Boot the computer. (You may have to configure the boot order in BIOS setup to boot the media you created before other devices.)
3. Follow the screen prompts to update your drive firmware.
There will be a readme.txt file for DDDP usage and a text file for drives affected in the location you selected tounzip the files that contains additional and late breaking information. If you need to run the Delivery Package again, you can run the file DDDP.exe from that same location.