Intel Matrix Storage Manager, v.5.0.1.1001, A02
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
Intel Matrix Storage Manager Driver (at OS install time only)
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Added Microsoft Digital Signatures(CAT files) for W2K install.
閱讀更多繁體中文版
5.0.1.1001, A02
發佈日期
17 11月 2005
下載類型
驅動程式
類別
儲存
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式
檔案格式： 自動解壓縮 zip 檔之中有一個以上的自動解壓縮磁碟影像
檔案名稱： R99995.exe
檔案大小： 341.11 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後按兩下以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
不適用
SHA1：
不適用
SHA-256：
不適用
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
支援的作業系統
Windows 2000
Windows XP
適用於
INFO,RAID0
安裝指示
Custom Instructions for R99995.exe:
This is a self extracting utility and will extract its contents (Windows XP driver files) to a folder in the following location c:\Dell\Drivers\. You must copy the content to a floppy diskette. These drivers are only to be used at OS installation (operating setup time) time.
At the beginning of the operating system setup, press F6 to install a third party SCSI or RAID driver.
1. When prompted, select 'S' to Specify Additional Device.
2. When prompted, insert the floppy disk you created in step 2 and press Enter.
3. At this point you should be presented with a selection for one of the following depending on you hardware version and configuration:
- Intel(R) 82801GR SATA RAID Controller
- Intel(R) 82801GR SATA AHCI Controller
- Intel(R) 82801FR SATA RAID Controller
- Intel(R) 82801FR SATA AHCI Controller
4. Highlight the selection that is appropriate for the hardware in your system and press Enter.
5. Press Enter again to continue. Leave the floppy disk in the system until the next reboot as the software will need to be copied from the floppy disk again when setup is copying files.
This is a self extracting utility and will extract its contents (Windows XP driver files) to a folder in the following location c:\Dell\Drivers\. You must copy the content to a floppy diskette. These drivers are only to be used at OS installation (operating setup time) time.
At the beginning of the operating system setup, press F6 to install a third party SCSI or RAID driver.
1. When prompted, select 'S' to Specify Additional Device.
2. When prompted, insert the floppy disk you created in step 2 and press Enter.
3. At this point you should be presented with a selection for one of the following depending on you hardware version and configuration:
- Intel(R) 82801GR SATA RAID Controller
- Intel(R) 82801GR SATA AHCI Controller
- Intel(R) 82801FR SATA RAID Controller
- Intel(R) 82801FR SATA AHCI Controller
4. Highlight the selection that is appropriate for the hardware in your system and press Enter.
5. Press Enter again to continue. Leave the floppy disk in the system until the next reboot as the software will need to be copied from the floppy disk again when setup is copying files.