Dell PowerEdge Products C6220 & C6220 II RSTe Host RAID in support of Windows Server 2008 English 64 bit v3.1.0.1085
需要重新啟動 已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
Dell PowerEdge Products C6220 RSTe Host RAID support OS Windows Server 2008 English 64 bit
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
1.Provides workaround for WD 6G SAS driver issue
2.Resolves GUI/driver installation errors if no drivers attached to AHCI controller
3.S3/S4 support enabled
閱讀更多2.Resolves GUI/driver installation errors if no drivers attached to AHCI controller
3.S3/S4 support enabled
繁體中文版
3.1.0.1085, A01
發佈日期
17 9月 2012
下載類型
驅動程式
類別
SAS RAID
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容,並且可能包含其他新功能。
檔案格式: 自動解壓縮 zip 檔之中有一個以上的自動解壓縮磁碟影像
檔案名稱: PBG_RSTe_Drivers_GUI_CIM_CLI_3.1.0.1085_2012.04.24.exe
檔案大小: 29.73 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾,然後按兩下以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
5d49fbcdab67aa27aa042e2e2442731f
SHA1:
dafb48b326c512a440ba3ec8ccf15a45fd42f3d8
SHA-256:
5fd6b4106cbb51087a27bb8e00ccb09757d8593cad67f426e88dfe8df9a117ec
檔案格式: 文字檔案包含方便客戶使用的修復及強化資訊
檔案名稱: EndUser LicenseAgreementType S_Rev. 040512.txt
檔案大小: 11.4 KB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案格式內含純文字,可使用標準文字編輯器予以檢視。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
c2ffe409366d225552ac6ed58f206b58
SHA1:
88522584d2ed8711c12c71ae9e569116a26e7b0a
SHA-256:
b85aae437264a3f053c9efec6b47fa1ba6610de28b749a06c2fec3dfc87bf333
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
1. SAS features are enabled on SATA/SAS Capable Controller if appropriate Intel(R) RAID C600 Upgrade Key is present in the system.
2. RAID 5 is no longer supported by SATA/SAS Capable Controller when SAS features are enabled.
3. Boot through expander is not supported in legacy mode.
4. SGPIO on AHCI Capable SATA Controller is disabled by default in order to support hibernation. Fix will be in a future release. The registry key
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorA\Parameters\Device]LED_Supported"=dword:00000001" can be added but will disable hibernation.
5. Windows 2003 x86 installation is not supported. Fix will be in a future release.
6. The disk fault LEDs will not work when using the expander. Fix will be in a future release.
7. MPIO Load Balancing in RAID Mode is unsupported
8. A SAS Wide port spanning SCU0 and SCU1 is not supported.
9. Plugging both SCU into the same expander is not supported
2. RAID 5 is no longer supported by SATA/SAS Capable Controller when SAS features are enabled.
3. Boot through expander is not supported in legacy mode.
4. SGPIO on AHCI Capable SATA Controller is disabled by default in order to support hibernation. Fix will be in a future release. The registry key
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorA\Parameters\Device]LED_Supported"=dword:00000001" can be added but will disable hibernation.
5. Windows 2003 x86 installation is not supported. Fix will be in a future release.
6. The disk fault LEDs will not work when using the expander. Fix will be in a future release.
7. MPIO Load Balancing in RAID Mode is unsupported
8. A SAS Wide port spanning SCU0 and SCU1 is not supported.
9. Plugging both SCU into the same expander is not supported
Windows Server 2008 R2
PowerEdge C6220
1. In windows , click and then select
2. Select System and Security
3. Select Device Manager
4. In other devices , will find the SAS Controller with a yellow warning symbol
5. Right click the SAS Controller and select Update Driver Software
6. Select Browse my computer for driver software
7. Select Browse to navigate where the driver resides
8. Navigate to where the driver is located and select the INF from the driver folder with that has the same OS version as the system . Click Install when the system promps a Windows Security warning .
9. After the driver software is installed successfully , click Close .
10. With the installation of the new driver , the system will prompt a warning to restart the computer , please select to reboot the system .
2. Select System and Security
3. Select Device Manager
4. In other devices , will find the SAS Controller with a yellow warning symbol
5. Right click the SAS Controller and select Update Driver Software
6. Select Browse my computer for driver software
7. Select Browse to navigate where the driver resides
8. Navigate to where the driver is located and select the INF from the driver folder with that has the same OS version as the system . Click Install when the system promps a Windows Security warning .
9. After the driver software is installed successfully , click Close .
10. With the installation of the new driver , the system will prompt a warning to restart the computer , please select