LSI Logic PERC3/DCL, PERC3/DC, PERC3/QC, PERC3/SC, PERC 4/Di, CERC ATA 100, PERC 4/SC, PERC 4/DC, PERC 4e/DC, Perc 4e/Di, PERC 4e/Si, v.5.48.0.0, A04
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
Dell PowerEdge RAID Controller 4e/Di, 4e/Si, 4e/DC, 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC,
PERC 4/Di, and CERC ATA100/4CH Device Driver for Windows 2000.
Version: 5.48
PERC 4/Di, and CERC ATA100/4CH Device Driver for Windows 2000.
Version: 5.48
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
During Bus Reset, the driver issues a call to the firmware and returns without waiting for the call to finish and asks for the next request from OS. This next request got issued to the firmware even before the Reset call completed resulting in the Reservation conflict. Now the driver does not issue the next command until the reset call to the firmware completes.
閱讀更多繁體中文版
5.48.0.0, A04
發佈日期
23 9月 2013
下載類型
驅動程式
類別
IDE/EIDE
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式 檢視重要資訊
檔案格式： 適用於 MS Windows (32 位元) 的更新套件
檔案名稱： RAID_DRVR_WIN_R99973.EXE
檔案大小： 1.13 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計，可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時，請務必選擇適用您作業系統的更新。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
D2B5450EB057B7E049E45C8253F04414
SHA1：
不適用
SHA-256：
不適用
檔案格式： 將檔案直接解壓縮至本機磁碟
檔案名稱： perc-cerc-w2k-5.48-A04.exe
檔案大小： 75 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
檔案格式： 外部版本資訊
檔案名稱： perc-cerc-w2k-5.48-A04.txt
檔案大小： 28.32 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
N/A
適用於
�
CERC ATA 100
PERC 4/DC
PERC 4/SC
PERC3/SC
安裝指示
Custom Instructions for perc-cerc-w2k-5.48-A04.exe:
This is a self-extracting package of the Windows 2000 device driver installation diskette for PERC 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC, CERC ATA100/4CH, PERC 4/Di, PERC 4e/Di, PERC4e/Si and PERC 4e/DC.
To build the installation diskette, execute the package, directing its output to an empty formatted diskette.
Refer to the readme file perc-cerc-w2k-5.48-A04.txt for further driver installation instructions.
Updating an Existing Windows 2000 Driver
Perform the following steps to update the Windows driver for the RAID controller already installed on your system.
NOTE: It is important that you idle your system before you update the driver.
1. Press Start > Settings > Control Panel > System. The System Properties screen displays.
2. Click on the Hardware tab.
3. Click the Device Manager and the Device Manager screen displays.
4. Click SCSI and RAID Controllers.
5. Double-click the RAID controller for which you want to update thedriver.
6. Click the Driver tab and click on Update Driver. The screen for the Upgrade Device Driver Wizard displays.
7. Insert the appropriate driver diskette.
8. Click Next.
9. Follow the steps in the Wizard to search the diskette for the driver.
10. Select the INF file from the diskette.
11. Click Next and continue the installation steps in the Wizard.
12. Click Finish to exit the wizard and reboot the system for the changes to take place.
Custom Instructions for perc-cerc-w2k-5.48-A04.txt:
Download the readme file 'perc-cerc-w2k-5.48-A04.txt' to view information about this release.
--------------------------------------------------------------------------------Dell Update Package Instructions for RAID_DRVR_WIN_R99973.EXE:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2.Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.
This is a self-extracting package of the Windows 2000 device driver installation diskette for PERC 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC, CERC ATA100/4CH, PERC 4/Di, PERC 4e/Di, PERC4e/Si and PERC 4e/DC.
To build the installation diskette, execute the package, directing its output to an empty formatted diskette.
Refer to the readme file perc-cerc-w2k-5.48-A04.txt for further driver installation instructions.
Updating an Existing Windows 2000 Driver
Perform the following steps to update the Windows driver for the RAID controller already installed on your system.
NOTE: It is important that you idle your system before you update the driver.
1. Press Start > Settings > Control Panel > System. The System Properties screen displays.
2. Click on the Hardware tab.
3. Click the Device Manager and the Device Manager screen displays.
4. Click SCSI and RAID Controllers.
5. Double-click the RAID controller for which you want to update thedriver.
6. Click the Driver tab and click on Update Driver. The screen for the Upgrade Device Driver Wizard displays.
7. Insert the appropriate driver diskette.
8. Click Next.
9. Follow the steps in the Wizard to search the diskette for the driver.
10. Select the INF file from the diskette.
11. Click Next and continue the installation steps in the Wizard.
12. Click Finish to exit the wizard and reboot the system for the changes to take place.
Custom Instructions for perc-cerc-w2k-5.48-A04.txt:
Download the readme file 'perc-cerc-w2k-5.48-A04.txt' to view information about this release.
--------------------------------------------------------------------------------Dell Update Package Instructions for RAID_DRVR_WIN_R99973.EXE:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2.Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.