LSI Logic U320 SCSI PCI RAID 0, v.1.08.15, A04
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
Combined (XP and Windows 2000)driver for the LSI U320 SCSI PCI RAID 0
adapter.
adapter.
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
WHQL signed drivers have been combined into a single package.
閱讀更多繁體中文版
1.08.15, A04
發佈日期
17 2月 2003
下載類型
驅動程式
類別
SCSI RAID
重要性
選用Dell Technologies 建議您檢閱此更新,以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態,或其提供的新功能不一定適用於您的環境。
檔案格式: 自動解壓縮 zip 檔之中有一個以上的自動解壓縮磁碟影像
檔案名稱: BR53195.exe
檔案大小: 1.43 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾,然後按兩下以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
不適用
SHA1:
不適用
SHA-256:
不適用
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
Windows 2000
Windows XP
U320 SCSI PCI RAID 0
Hard Drive Floppy Disk Creation for BR53195.exe
1. Get 1 blank, formatted floppy disks.
2. Click the new icon on the desktop. The Self-Extractor
window appears.
3. Click Setup. An MS-DOS window appears with a message
indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key. A message appears prompting
you to insert a blank floppy diskette. Insert a floppy disk into the floppy
disk drive.
5. Press the [ENTER] key. A message appears indicating
that all data on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key. The
files are copied to the floppy diskette. Once the files have been copied
to the diskette a message appears prompting you to insert the second
diskette.
7. Repeat steps 4 – 6 until you reach the end of the diskette
set.
8. After all the files have been copied to the last floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Floppy Disk Setup.exe
1. Insert the first disk of the set or the only disk.
2. Click Start and then click Run.
3. In the Open textbox, type a:\setup.
4. Follow the on-screen instructions.
1. Get 1 blank, formatted floppy disks.
2. Click the new icon on the desktop. The Self-Extractor
window appears.
3. Click Setup. An MS-DOS window appears with a message
indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key. A message appears prompting
you to insert a blank floppy diskette. Insert a floppy disk into the floppy
disk drive.
5. Press the [ENTER] key. A message appears indicating
that all data on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key. The
files are copied to the floppy diskette. Once the files have been copied
to the diskette a message appears prompting you to insert the second
diskette.
7. Repeat steps 4 – 6 until you reach the end of the diskette
set.
8. After all the files have been copied to the last floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Floppy Disk Setup.exe
1. Insert the first disk of the set or the only disk.
2. Click Start and then click Run.
3. In the Open textbox, type a:\setup.
4. Follow the on-screen instructions.