Dell iDRAC Monolithic release V1.95
需要重新啟動 已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
iDRAC6 V1.95
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Enhancements:
- Creating a partition from an image failed intermittently with Dell supported 8 GB SD card.
- Cannot create Certificate Signing Request (CSR) with remote and local RACADM.
- Cannot perform firmware update using the Web interface with Internet Explorer 10 browser.
- Cannot upload an SSH public key using command racadm sshpkauth if the key does not end with an "=" or "==" at the end of the key string.
- RAC serial redirect prompts for user credential when cfgSerialConsoleNoAuth is enabled.
- Power monitoring graph is not visible in iDRAC6 Web interface with Internet Explorer 10 browser.
- If the user password has (?) character, access is denied for WSMAN commands.
- In iDRAC6 express configuration console/media tab is listed in the system page. The Console/media tab must not be available in iDRAC6 express configuration.
- If is ON on the management station and Virtual Console is launched, and then if any letter is pressed small case letter isdisplayed. If is OFF and any letter is pressed, then Capital letter is displayed.
- The racadm vmdisconnect command from local and Remote racadm displays an error while disconnecting Remote File Share (RFS) attached media-"Error:No Virtual media devices are currently connected". But the media is connected through RFS before executing the command.
- In the iDRAC Web interface -> System Summary page -> Server Health section, the Power Supplies component health status displays as critical health instead of warning health in the absence of redundant power supply.
- Hardware inventory page in iDRAC Web interface displays information for two Power Supply Units (PSUs) when only one is present.
- Broadcom NIC Firmware Version in the iDRAC Web interface -> System Inventory page is not listing the correct version.
- Lifecycle Controller version is not displayed in the iDRAC Web interface System Summary and System Details pages.
閱讀更多- Creating a partition from an image failed intermittently with Dell supported 8 GB SD card.
- Cannot create Certificate Signing Request (CSR) with remote and local RACADM.
- Cannot perform firmware update using the Web interface with Internet Explorer 10 browser.
- Cannot upload an SSH public key using command racadm sshpkauth if the key does not end with an "=" or "==" at the end of the key string.
- RAC serial redirect prompts for user credential when cfgSerialConsoleNoAuth is enabled.
- Power monitoring graph is not visible in iDRAC6 Web interface with Internet Explorer 10 browser.
- If the user password has (?) character, access is denied for WSMAN commands.
- In iDRAC6 express configuration console/media tab is listed in the system page. The Console/media tab must not be available in iDRAC6 express configuration.
- If
- The racadm vmdisconnect command from local and Remote racadm displays an error while disconnecting Remote File Share (RFS) attached media-"Error:No Virtual media devices are currently connected". But the media is connected through RFS before executing the command.
- In the iDRAC Web interface -> System Summary page -> Server Health section, the Power Supplies component health status displays as critical health instead of warning health in the absence of redundant power supply.
- Hardware inventory page in iDRAC Web interface displays information for two Power Supply Units (PSUs) when only one is present.
- Broadcom NIC Firmware Version in the iDRAC Web interface -> System Inventory page is not listing the correct version.
- Lifecycle Controller version is not displayed in the iDRAC Web interface System Summary and System Details pages.
繁體中文版
1.95, A00
發佈日期
21 2月 2013
下載類型
韌體
類別
內嵌式伺服器管理
重要性
緊急Dell Technologies 強烈建議儘快套用此重要更新。此更新包含的重大錯誤修正和變更，可改善 Dell 系統功能、可靠性及穩定性。其也可能包含安全性修正和其他增強功能。
可用的格式
檔案格式： 適用於 Red Hat Linux 的更新套件
檔案名稱： ESM_Firmware_CMDN0_LN32_1.95_A00.BIN
檔案大小： 54.52 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
適用於 Linux 的 Dell 更新套件可做為獨立的應用程式，確保符合特定的驗證條件，然後套用更新。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
e2b1115a4e849efd878ec7cbf5430286
SHA1：
3d81671d94f244b80dd007f7dce744fa86cf2f91
SHA-256：
4d97efb58439c9fcae6ceaf93ac688cb71887b50c565c2b20592c83123a71d50
檔案格式： 應用程式
檔案名稱： iDRAC6_1.95_A00_FW_IMG.exe
檔案大小： 48.94 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
應用程式
為了確保下載的完整性，請驗證總和檢查值。
MD5：
85a7182437ec160bd5d457891305ed39
SHA1：
ba478d4dffcf8fd16d2e81ebbed3ca0cb92ee433
SHA-256：
a0d9cc92c7e4f7d3b45e75f7b459a7b965fb30f6d37f30fa31da9e8aa355e89a
檔案格式： 包含密碼編譯簽章的 GnuPG 檔案
檔案名稱： ESM_Firmware_CMDN0_LN32_1.95_A00.BIN.sign
檔案大小： 194 Bytes
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
您可以使用適用於 Red Hat Linux 更新套件的 GnuPG 簽章，在相關聯的 Red Hat Linux 更新套件中驗證 Dell 的身分。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
d8b40bdc5b49daef7b441c68bd2594bc
SHA1：
e3a54a037ce63bd4ceb954c9b671a3ddc026bc8f
SHA-256：
19f15dc6fd79518ccc0a74a143bb11d4855c44bfcf5abfe9db63902447865e44
檔案格式： 封存的 PDF 檔案提供客戶說明及程序資訊
檔案名稱： iDRAC6_1.95_A00_ReleaseNotes.pdf
檔案大小： 120.88 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此格式包含 PDF 檔案的封存，可用來向客戶提供說明及程序性資訊。請務必先安裝 Adobe Acrobat Reader 以檢視此封存中的檔案。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
294eb88f5bbc3fc0638dc426e8191a4a
SHA1：
1241947106f7fed0f511472d77165294f262b314
SHA-256：
c5cf02ffbccfd1a9e52f47d31234e9e7a185b5fe6ed13b196bc6b1b16869f700
檔案格式： 適用於 MS Windows (32 位元) 的更新套件
檔案名稱： ESM_Firmware_CMDN0_WN32_1.95_A00.EXE
檔案大小： 57.87 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計，可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時，請務必選擇適用您作業系統的更新。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
7365a5f803f4753ea8ff50afcae5f3a8
SHA1：
fbf108ecff8c1228b7825ffbcf7c019dcae1548a
SHA-256：
4e172fd679d3ce3d768dfa5582f55ec44eec9525121365f55a03fce11996adf9
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
適用於
iDRAC6
安裝指示
Download
1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
1. Click Download Now to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.