Micron C400 32GB/64GB/128GB/256GB mSATA Firmware Update
需要重新啟動 已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This package provides the Micron C400 32GB/64GB/128GB/256GB mSATA Firmware Update and is supported on the Alienware Notebook, Inspiron, Latitude, OptiPlex, Precision, Vostro and XPS models that are running Windows series operation systems.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes:
- Fixed issues where SSD may not be detected after a previous forced power cycle.
Enhancements:
- Enhanced the device ready time, allowing system to be able to power up quickly.
閱讀更多- Fixed issues where SSD may not be detected after a previous forced power cycle.
Enhancements:
- Enhanced the device ready time, allowing system to be able to power up quickly.
繁體中文版
04MH, A00-00
發佈日期
02 3月 2013
下載類型
韌體
類別
儲存
重要性
選用Dell Technologies 建議您檢閱此更新，以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態，或其提供的新功能不一定適用於您的環境。
可用的格式 檢視重要資訊
檔案格式： 韌體影像
檔案名稱： Micron C400 mSATA 04MH.zip
檔案大小： 1.86 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
為了確保下載的完整性，請驗證總和檢查值。
MD5：
011eab49f8d2a66aa5ba3bda53fc2704
SHA1：
c8a726c6715ea37c691e0db562435c2d8ddaac15
SHA-256：
3e2d8a35c2a4748f89b0f3d6b65a6e8f392ff632a85c77e5b1dae113f212764b
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
1. Equipment needed, a CD drive, a blank CD
2. Do not POWER OFF the system during the firmware update procedure
3. Please perform a full system backup before starting the firmware update procedure (highly recommended)
4. Connect your notebook to a AC power supply during the firmware update procedure (highly recommended)
5. The firmware utility tool is OS independent.
2. Do not POWER OFF the system during the firmware update procedure
3. Please perform a full system backup before starting the firmware update procedure (highly recommended)
4. Connect your notebook to a AC power supply during the firmware update procedure (highly recommended)
5. The firmware utility tool is OS independent.
支援的作業系統
Windows 7, 32-bit
Windows 7, 64-bit
Windows 8, 32-bit
Windows 8, 64-bit
適用於
Micron RealSSD mSATA
安裝指示
Backup
1. It is highly recommended that full system backup be completed before starting this firmware upgrade procedure
Download and image extraction
1. Click Download to download the zipped file
2. Extract the file into a folder
3. The ISO image file is used to burn the utility onto a bootable CD
Installation
1. Ensure that your notebook is plugged into a AC power supply during the update process (high recommended)
2. DO NOT remove power from the system during the firmware update process
3. Ensure that your BIOS has been set to ATA or AHCI mode. DO NOT select RAID mode. This utility will not work in RAID mode
4. Ensure that your BIOS boot order has been set up to boot from CD drive
a. You can do so by either pressing F12 during the boot up and then select CD drive to boot from
b. Or by pressing F2 during the boot up, enter the boot order selection and select CD drive to boot from. Save the setting before exiting
5. Insert the bootable CD media with ISO image into yoursystem
6. Reboot the system from the bootable CD media, the firmware update utility will be started automatically
7. Connected Micron SSD drive that is eligible for the firmware update will be shown on the screen
8. Select Yes to the request for 'Update firmware on this drive?'
9. DO NOT power off the system during the update process, the update will take about 30 to 60 seconds. Some systems may require a longer time to complete.
10.Upon completion, the message 'Current Firmware is : 04MH' will be displayed.
1. It is highly recommended that full system backup be completed before starting this firmware upgrade procedure
Download and image extraction
1. Click Download to download the zipped file
2. Extract the file into a folder
3. The ISO image file is used to burn the utility onto a bootable CD
Installation
1. Ensure that your notebook is plugged into a AC power supply during the update process (high recommended)
2. DO NOT remove power from the system during the firmware update process
3. Ensure that your BIOS has been set to ATA or AHCI mode. DO NOT select RAID mode. This utility will not work in RAID mode
4. Ensure that your BIOS boot order has been set up to boot from CD drive
a. You can do so by either pressing F12 during the boot up and then select CD drive to boot from
b. Or by pressing F2 during the boot up, enter the boot order selection and select CD drive to boot from. Save the setting before exiting
5. Insert the bootable CD media with ISO image into yoursystem
6. Reboot the system from the bootable CD media, the firmware update utility will be started automatically
7. Connected Micron SSD drive that is eligible for the firmware update will be shown on the screen
8. Select Yes to the request for 'Update firmware on this drive?'
9. DO NOT power off the system during the update process, the update will take about 30 to 60 seconds. Some systems may require a longer time to complete.
10.Upon completion, the message 'Current Firmware is : 04MH' will be displayed.