Seagate SATA ST2000NM0011, ST1000NM0011 and ST500NM0011 firmware version PA08
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
This release contains firmware version PA08 for Seagate SATA (7200 rpm 3.5" SATA) 500GB, 1TB and 2TB Hard Drives. Dell. Vendor model numbers ST2000NM0011, ST1000NM0011 and ST500NM0011.
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Resolved rare issue that could cause hang during boot up with RAID controller
Resolved issue would unexpectedly abort read command without proper reporting proper status
Improved drive error handling
閱讀更多Resolved issue would unexpectedly abort read command without proper reporting proper status
Improved drive error handling
繁體中文版
PA08, A02
發佈日期
19 9月 2012
下載類型
韌體
類別
儲存
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容,並且可能包含其他新功能。
檔案格式: 適用於 MS Windows (32 位元) 的更新套件
檔案名稱: Serial-ATA_Firmware_NPK9P_WN32_PA08_A02.EXE
檔案大小: 6 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計,可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時,請務必選擇適用您作業系統的更新。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
91c0b965f1080559f910d1f049f7f79a
SHA1:
1b582058e4d75ef4280f2576e708bbf9010ab070
SHA-256:
62e79022873511fe12a18b7373f49704f20971d1d710f65192b4e6dd830cf1c7
檔案格式: 包含密碼編譯簽章的 GnuPG 檔案
檔案名稱: Serial-ATA_Firmware_NPK9P_LN32_PA08_A02.BIN.sign
檔案大小: 194 Bytes
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
您可以使用適用於 Red Hat Linux 更新套件的 GnuPG 簽章,在相關聯的 Red Hat Linux 更新套件中驗證 Dell 的身分。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
d1d12eb2614aab4e88897b9635bd60ec
SHA1:
c7401dfd16e52bec234ae745582f468f842def41
SHA-256:
555babb732a1d05b091736325668d2301858697746216a7b433eee511255ce95
檔案格式: 適用於 Red Hat Linux 的更新套件
檔案名稱: Serial-ATA_Firmware_NPK9P_LN32_PA08_A02.BIN
檔案大小: 4.08 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
適用於 Linux 的 Dell 更新套件可做為獨立的應用程式,確保符合特定的驗證條件,然後套用更新。
注意:適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案,瞭解詳情。
注意:適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案,瞭解詳情。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
16a6cf20976fbfcfca61fc90e590d8a8
SHA1:
c1e03376491d8ba6fd0e0429c19f31a02e49eb35
SHA-256:
3f6b60645a7addf411848e7a3f8855e4b4dbf9bd2e12c0d571b11c0570000d16
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
Novell SuSE Linux ES 11
Windows Server 2008 x64
Red Hat® Enterprise Linux 4.5
Red Hat® Enterprise Linux 4.6
SuSE Linux ES 9
Suse Linux ES 9
Suse Linux ES 10
Red Hat® Enterprise Linux 4.5
Red Hat® Enterprise Linux 4.7
Red Hat® Enterprise Linux 5.2
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 5
Novell SuSE Linux ES 10
Windows Server 2008 x86
Windows Server 2003
Windows Server 2008 R2
Windows Server 2003 x64
Seagate Constellation ES SATA 1TB 7.2K RPM
Seagate Constellation ES SATA 2TB 7.2K RPM
Seagate Constellation ES SATA 500GB 7.2K RPM
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.