PowerConnect,6200,v3.3.5.5,A29
需要重新啟動 已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
This firmware release is a maintenance release for the 62xx version of PowerConnect switches and includes only bug fixes.
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes and Enhancements:
Enhancements:
- None.
Fixes:
- Error 404 when trying to upload configuration file through GUI using FQDN
- Radius doesn't use specified source-IP address when address is from management
- Switch cannot use the colon character in SNMP user-configured OID field
- Removing VLAN from general mode port affects VLAN routing
- Ping not working when the configuration is cleared and applied on the same VLAN
- NSF Issue when using Port-channel spanned across stack members
- Switch Crash while sending LLDP stream
- NET_ADDR:Invalid FamilyType - 0
- Policy incorrectly gets applied in the GUI when ACL is also applied on the interface
- Switch doesn't keep fixed speed LAG configuration after reboot
- Port detection mechanism fails with SNMP Query using Q-BRIDGE-MIB
- DHCP Request packets are not being forwarded to Voice VLAN Component
閱讀更多Enhancements:
- None.
Fixes:
- Error 404 when trying to upload configuration file through GUI using FQDN
- Radius doesn't use specified source-IP address when address is from management
- Switch cannot use the colon character in SNMP user-configured OID field
- Removing VLAN from general mode port affects VLAN routing
- Ping not working when the configuration is cleared and applied on the same VLAN
- NSF Issue when using Port-channel spanned across stack members
- Switch Crash while sending LLDP stream
- NET_ADDR:Invalid FamilyType - 0
- Policy incorrectly gets applied in the GUI when ACL is also applied on the interface
- Switch doesn't keep fixed speed LAG configuration after reboot
- Port detection mechanism fails with SNMP Query using Q-BRIDGE-MIB
- DHCP Request packets are not being forwarded to Voice VLAN Component
繁體中文版
v3.3.5.5, A29
發佈日期
20 11月 2012
下載類型
韌體
類別
有線網路/無線網路/藍牙
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容,並且可能包含其他新功能。
檔案格式: 文字檔案包含方便客戶使用的修復及強化資訊
檔案名稱: PC6200ReadMev3.3.5.5a29.txt
檔案大小: 3.09 KB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案格式內含純文字,可使用標準文字編輯器予以檢視。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
765f657df13b8c6c6cca15f579e4942a
SHA1:
da2a5936f59c7f90dd9f5f2f1665a7782c7c4cae
SHA-256:
2256ff8ae1af128538b8b42ff8b09a788d8396dc9f283fd454629902f70de8cb
檔案格式: 將檔案直接解壓縮至本機磁碟
檔案名稱: PC6200v3.3.5.5-Release.zip
檔案大小: 9.99 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案格式內含檔案封存,且該封存可能會解壓縮到硬碟上的目錄。接著就可以在該目錄中完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
b129a3d5e65c1bdac93196c98e9959c6
SHA1:
4c5a2acdcb1cf629427f4643ec97d9272dce34a9
SHA-256:
fbc0f816b16a4ac036846f64f60c961f23a63ef5d67923ec4dc883c289565af2
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
NOTE: Please follow software update instructions included in the zip file. If upgrading from version 3.x.x.x firmware, please follow procedure in PC6200UpgradeSoftwareFromVersion3.x.x.xProcedure.pdf file included in the zip file.
If upgrading from version 2.x.x.x firmware, please follow procedure in PC6200UpgradeSoftwareFromVersion2.xProcedure.pdf file included in the zip file
If upgrading from version 2.x.x.x firmware, please follow procedure in PC6200UpgradeSoftwareFromVersion2.xProcedure.pdf file included in the zip file
不適用
PowerConnect 6224
PowerConnect 6224F
PowerConnect 6224P
PowerConnect 6248
PowerConnect 6248P
NOTE: Please follow software update instructions included in the zip file. If upgrading from version 3.x.x.x firmware, please follow procedure in PC6200UpgradeSoftwareFromVersion3.x.x.xProcedure.pdf file included in the zip file.
If upgrading from version 2.x.x.x firmware, please follow procedure in PC6200UpgradeSoftwareFromVersion2.xProcedure.pdf file included in the zip file
If upgrading from version 2.x.x.x firmware, please follow procedure in PC6200UpgradeSoftwareFromVersion2.xProcedure.pdf file included in the zip file