LSI Logic PERC 4/DC, v.6.46.2.64, A02
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
Windows Server 2003 IA64 Driver for the PERC 4/DC RAID Controller.
Version 6.46.2.64
Version 6.46.2.64
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
W2K3 6.46.2.64
1. If the Adapter is set to DEAD, all the IOCTLs sent to the driver will be returned with a special signature 0xEE to identify that the adapter is DEAD and not responding.
2. During Bus Reset, the driver issues a call to the F/W and returns without waiting for the call to finish and asks for the next request from OS. This next request got issued to the F/W even before the reset call completed resulting in the reservation conflict. Now the driver does not issue the next command until the reset call to the F/W completes.
3. SCSI commands issued to the Dummy Device exposed by the driver was not handled properly. Driver should have rejected all the commands issued to the Dummy Device except for the SCSIOP_INQUIRY and SCSIIO_READ_CAPACITY. This was causing the system to blue screen when using utilities sending SCSI commands to the Dummy Device. This release driver handles all the SCSI commands issued to the driver gracefully.
閱讀更多1. If the Adapter is set to DEAD, all the IOCTLs sent to the driver will be returned with a special signature 0xEE to identify that the adapter is DEAD and not responding.
2. During Bus Reset, the driver issues a call to the F/W and returns without waiting for the call to finish and asks for the next request from OS. This next request got issued to the F/W even before the reset call completed resulting in the reservation conflict. Now the driver does not issue the next command until the reset call to the F/W completes.
3. SCSI commands issued to the Dummy Device exposed by the driver was not handled properly. Driver should have rejected all the commands issued to the Dummy Device except for the SCSIOP_INQUIRY and SCSIIO_READ_CAPACITY. This was causing the system to blue screen when using utilities sending SCSI commands to the Dummy Device. This release driver handles all the SCSI commands issued to the driver gracefully.
繁體中文版
6.46.2.64, A02
發佈日期
07 6月 2005
下載類型
驅動程式
類別
SCSI RAID
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式
檔案格式： 將檔案直接解壓縮至本機磁碟
檔案名稱： perc-w2k3-6.46.2.64-A02.exe
檔案大小： 133 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
檔案格式： 外部版本資訊
檔案名稱： perc-w2k3-6.46.2.64-A02.txt
檔案大小： 5.66 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
支援的作業系統
Windows Server 2003
適用於
PERC 4/DC
安裝指示
Custom Instructions for perc-w2k3-6.46.2.64-A02.exe:
Updating an Existing Windows 2003 Driver
----------------------------------------
Perform the following steps to update the Windows driver for the RAID controller already installed on your system.
NOTE: It is important that you idle your system before you update the driver.
1. Press Start > Control Panel > System.
The System Properties screen displays.
2. Click on the Hardware tab.
3. Click the Device Manager button and the Device Manager screen displays.
4. Click SCSI and RAID Controllers.
5. Double-click the RAID controller for which you want to update the driver.
6. Click the Driver tab and click on Update Driver.
The screen for the Upgrade Device Driver Wizard displays.
7. Insert the appropriate driver diskette.
8. Click Next.
9. Follow the steps in the Wizard to search the diskette for the driver.
10. Select the name of the driver, not the INF file.
11. Click Next and continue the installation steps in the Wizard.
12. Click Finish to exit the wizard and reboot the system for the changes to take place.
Refer to the readme file perc-w2k3-6.46.2.64-A02.txt for further driver installation instructions.
Custom Instructions for perc-w2k3-6.46.2.64-A02.txt:
Download the readme file (perc-w2k3-6.46.2.64-A02.txt) to view information about this release.
Updating an Existing Windows 2003 Driver
----------------------------------------
Perform the following steps to update the Windows driver for the RAID controller already installed on your system.
NOTE: It is important that you idle your system before you update the driver.
1. Press Start > Control Panel > System.
The System Properties screen displays.
2. Click on the Hardware tab.
3. Click the Device Manager button and the Device Manager screen displays.
4. Click SCSI and RAID Controllers.
5. Double-click the RAID controller for which you want to update the driver.
6. Click the Driver tab and click on Update Driver.
The screen for the Upgrade Device Driver Wizard displays.
7. Insert the appropriate driver diskette.
8. Click Next.
9. Follow the steps in the Wizard to search the diskette for the driver.
10. Select the name of the driver, not the INF file.
11. Click Next and continue the installation steps in the Wizard.
12. Click Finish to exit the wizard and reboot the system for the changes to take place.
Refer to the readme file perc-w2k3-6.46.2.64-A02.txt for further driver installation instructions.
Custom Instructions for perc-w2k3-6.46.2.64-A02.txt:
Download the readme file (perc-w2k3-6.46.2.64-A02.txt) to view information about this release.