Multi-Tech External Modem (ZBA), v.1.0, A00
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
Multi-tech Drivers for Windows NT, Windows 2000 and Netware 4.x and 5.x.
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
NA
閱讀更多繁體中文版
1.0, A00
發佈日期
22 5月 2003
下載類型
驅動程式
類別
數據機/通訊
重要性
選用Dell Technologies 建議您檢閱此更新,以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態,或其提供的新功能不一定適用於您的環境。
檔案格式: ZipPack 外接
檔案名稱: Mtechzba.exe
檔案大小: 3.67 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾,然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
487ac5002c6b14ff37cc1f474088b00f
SHA1:
不適用
SHA-256:
不適用
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
For Windows environments:
A. Use the Multi-Tech Global Wizard for MT5634ZBA initial setup and
country configuration in Windows NT environments. This modem is not
approved in, or configured for operation in all countries, so it is
important to first check the MT5634ZBA initial setup and country
configuration in the Global Wizard program.
B. Use the Multi-Tech DOSFlash upgrade utility in a DOS window
environment.
C. Use the Multi-Tech NTFlash upgrade utility in Windows NT
environments.
D. Be sure to turn off Windows NT RAS service before flash upgrading
the MT5634ZBA.
E. For Windows systems with autorun disabled, run the program
AUTORUN.EXE from the root directory of the CD-ROM to begin installation.
For non-Windows environments:
A. To configure for a specific country, execute the appropriate AT
commands in a terminal window (refer to the Country Code Configuration
section later in this document). This modem is not approved in, or
configured for operation in all countries, so it is important to first
check the MT5634ZBA initial setup and country configuration.
B. To upgrade using DOSFlash, use the DOSFLASH.EXE application
located in the DOSFLASH directory on the CD-ROM.
C. For installation in a Novell Netware environment, use the MDC
(Modem Definition Compiled) file in the NOVELL directory on the
CD-ROM. For further information refer to the README.TXT file in that
directory.
A. Use the Multi-Tech Global Wizard for MT5634ZBA initial setup and
country configuration in Windows NT environments. This modem is not
approved in, or configured for operation in all countries, so it is
important to first check the MT5634ZBA initial setup and country
configuration in the Global Wizard program.
B. Use the Multi-Tech DOSFlash upgrade utility in a DOS window
environment.
C. Use the Multi-Tech NTFlash upgrade utility in Windows NT
environments.
D. Be sure to turn off Windows NT RAS service before flash upgrading
the MT5634ZBA.
E. For Windows systems with autorun disabled, run the program
AUTORUN.EXE from the root directory of the CD-ROM to begin installation.
For non-Windows environments:
A. To configure for a specific country, execute the appropriate AT
commands in a terminal window (refer to the Country Code Configuration
section later in this document). This modem is not approved in, or
configured for operation in all countries, so it is important to first
check the MT5634ZBA initial setup and country configuration.
B. To upgrade using DOSFlash, use the DOSFLASH.EXE application
located in the DOSFLASH directory on the CD-ROM.
C. For installation in a Novell Netware environment, use the MDC
(Modem Definition Compiled) file in the NOVELL directory on the
CD-ROM. For further information refer to the README.TXT file in that
directory.