Dell Microsoft Hotfix and KB Updates for NAS, v.1.1.0.0, A00
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
This contains Windows Storage Server 2008 Update 1 and Update 2 which consist of updates for the following issues:
• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
This contains Windows Storage Server 2008 Update 1 and Update 2 which consist of updates for the following issues:
• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
閱讀更多• KB968675 - Storport Update
This update prevents a memory leak that is caused by a temporary unit condition.
• KB970662 - Single Instance Storage (SIS) Update
This update resolves the following issues with SIS:
A memory leak can occur with Groveler.exe if a forced rescan is initiated.
There can be timing issues in SIS copy-on-first-write operations.
NTFS re-ordering might be incorrectly handled after a forced shutdown.
• KB971191 - SIS links that have file sizes less than 1KB get set to normal files after restoring SIS v1 data to a SIS v2 volume.
This issue can occur when backing up and restoring SIS files (links) that have been truncated to a length less than or equal to 1 KB from a migrated Windows Storage Server 2003 R2 SIS-enabled volume to Windows Storage Server 2008.
• KB970658 – iSCSI initiator appears to fail on reconnection
After a lost iSCSI initiator connection is recovered, the session state in iSCSI Initiator interface may continue to display "Reconnecting." This issue only applies to application servers connecting to Microsoft iSCSI Software Target using the iSCSI Initiator.
• KB971365 – Added support for GPT disks greater than 2TB.
This update supports assigning a GPT disk (greater than or equal to 2TB) to a failover cluster using the Share and Storage Management MMC snap-in.
• KB974564 - Single Instance Storage (SIS) Update
This update resolves the following issues with the SIS filter driver:
The SIS filter incorrectly uses paged memory for copy-on-first-write requests and SI_COPY_THREAD_REQUEST.
SIS may corrupt link files that have data written beyond end-of-file (EOF). This update prevents the issue.
NOTE: SIS is only available on the Standard and Enterprise editions of the operating system. Only the necessary updates will be applied to the system.
繁體中文版
1.1.0.0, A00
發佈日期
12 4月 2010
下載類型
應用程式
類別
作業系統
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容,並且可能包含其他新功能。
檔案格式: 適用於 MS Windows (32 位元) 的更新套件
檔案名稱: APP_WIN_R255746.EXE
檔案大小: 4.21 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計,可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時,請務必選擇適用您作業系統的更新。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
84EDDC6DD74CAD8EFBA0EE16E185B504
SHA1:
不適用
SHA-256:
不適用
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
Windows Server 2008 x64
Custom Instructions for APP_WIN_R255746.EXE:
This release contains updates for the PowerVault NAS Windows Storage Server 2008 based systems.
Download and Install Instructions
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
3. Copy the package to a USB key, removable media, or network share that is accessible by the PowerVault NAS system that will be updated.
4. Log into the PowerVault NAS system and browse for the software package that was downloaded.
5. Double click on the package, only the updates applicable to your Operating System Edition (Basic, Standard, Enterprise) will be installed.
6. If the PowerVault NAS system does not reboot automatically, please reboot the system manually.
This release contains updates for the PowerVault NAS Windows Storage Server 2008 based systems.
Download and Install Instructions
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
3. Copy the package to a USB key, removable media, or network share that is accessible by the PowerVault NAS system that will be updated.
4. Log into the PowerVault NAS system and browse for the software package that was downloaded.
5. Double click on the package, only the updates applicable to your Operating System Edition (Basic, Standard, Enterprise) will be installed.
6. If the PowerVault NAS system does not reboot automatically, please reboot the system manually.