Samsung PM800 FDE 64GB THM SATA2 SSD, PM800 FDE 128GB THM SATA2 SSD, PM800 FDE 256GB THM SATA2 SSD, v.VBM9MD1Q/VBM95D1Q , A00
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
Recommend customer to use this new FW for resolve the performance degrade issue when SSD getting full
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Initial Release
閱讀更多繁體中文版
VBM9MD1Q/VBM95D1Q, A00
發佈日期
01 8月 2010
下載類型
硬體
類別
儲存
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式
檔案格式： ZipPack 外接
檔案名稱： SAMSUNG_MULTI-DEVICE_A00_R276533.exe
檔案大小： 1.93 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
不適用
SHA1：
不適用
SHA-256：
不適用
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
支援的作業系統
Windows 7, 32-bit
Windows 7, 64-bit
Windows Vista, 32-bit
MS Windows Vista 64 位元
Windows XP
Windows XP, 64-bit
安裝指示
Custom Instructions for SAMSUNG_MULTI-DEVICE_A00_R276533.exe:
(Preparation)
1. Extract all provided zip files to the Bootable USB Drive (extract to the root directory).
This will create a DSRD folder on the USB drive.
2. Restart your PC and Press "F2" to enter System BIOS. Select -->System Configuration--> SATA Operation --> AHCI or ATA.
3. Under Boot Sequence set USB as the first boot device in the boot order (Refer to your system user guide).
4. Apply changed settings and power off the system.
(Applying Firmware Update)
1. Insert USB boot key and power on the system.
i) Check boot priority settings in your system BIOS if your system fails to boot from USB drive.
ii) DSRD application will execute only in IDE and AHCI modes of ATA / SATA /AHCI controllers. If it fails to run, check the BIOS setting for SATA Operation and ensure it is set to ATA or AHCI mode.
2. Execute DOSRD1_0.EXE in DSRD folder.
3. The message ¡°Samsung electronics FW Download Utility¡± will appear. Press any key to continue.
4. FW Utility will automatically detect your SSD and if a FW upgrade candidate is detected, the device name with old FW version will be displayed. Do not press any key at this time.
5. When the following prompt will appears ¡±Download FW on this disk?¡±, please press ¡®y¡¯ and hit ¡®enter¡¯ to continue.
6. A prompt will remind you to backup all data and ask you ¡±Do you want to continue?¡±, please press ¡®y¡¯. Before hitting ¡®enter,¡¯ please verify that you have backed up all pre-existing data on the device. This will begin the download process.
7. Once download is complete, the message will appear ¡°Firmware has been successfully upgraded!¡±
[WARNING]
Even if the progression dot appears to have completed DO NOT PRESS ANY OTHER KEY such as ESC, Power Button, etc unless you see the "Firmware has been successfully updated!!"
8. DSRD will automatically terminate after firmware update completion.
9. Turn off the system power after firmware update has completed. You now have latest firmware version on your SSD!
10. Restart your PC and press "F2" to entering BIOS setting, Select -->System Configuration-->SATA operation, choose the original setting used prior to applying firmware update. Note: Factory default is IRRT or RAID.
Additional Notes:
1.The download tool will skip the firmware update process if the upgraded firmware version is already installed on the drive.
2.If you execute DSRD again when your SSD has the latest FW, you will see messaging that the same firmware revision exist on the drive and the tool will skip the firmware update process.
(Preparation)
1. Extract all provided zip files to the Bootable USB Drive (extract to the root directory).
This will create a DSRD folder on the USB drive.
2. Restart your PC and Press "F2" to enter System BIOS. Select -->System Configuration--> SATA Operation --> AHCI or ATA.
3. Under Boot Sequence set USB as the first boot device in the boot order (Refer to your system user guide).
4. Apply changed settings and power off the system.
(Applying Firmware Update)
1. Insert USB boot key and power on the system.
i) Check boot priority settings in your system BIOS if your system fails to boot from USB drive.
ii) DSRD application will execute only in IDE and AHCI modes of ATA / SATA /AHCI controllers. If it fails to run, check the BIOS setting for SATA Operation and ensure it is set to ATA or AHCI mode.
2. Execute DOSRD1_0.EXE in DSRD folder.
3. The message ¡°Samsung electronics FW Download Utility¡± will appear. Press any key to continue.
4. FW Utility will automatically detect your SSD and if a FW upgrade candidate is detected, the device name with old FW version will be displayed. Do not press any key at this time.
5. When the following prompt will appears ¡±Download FW on this disk?¡±, please press ¡®y¡¯ and hit ¡®enter¡¯ to continue.
6. A prompt will remind you to backup all data and ask you ¡±Do you want to continue?¡±, please press ¡®y¡¯. Before hitting ¡®enter,¡¯ please verify that you have backed up all pre-existing data on the device. This will begin the download process.
7. Once download is complete, the message will appear ¡°Firmware has been successfully upgraded!¡±
[WARNING]
Even if the progression dot appears to have completed DO NOT PRESS ANY OTHER KEY such as ESC, Power Button, etc unless you see the "Firmware has been successfully updated!!"
8. DSRD will automatically terminate after firmware update completion.
9. Turn off the system power after firmware update has completed. You now have latest firmware version on your SSD!
10. Restart your PC and press "F2" to entering BIOS setting, Select -->System Configuration-->SATA operation, choose the original setting used prior to applying firmware update. Note: Factory default is IRRT or RAID.
Additional Notes:
1.The download tool will skip the firmware update process if the upgraded firmware version is already installed on the drive.
2.If you execute DSRD again when your SSD has the latest FW, you will see messaging that the same firmware revision exist on the drive and the tool will skip the firmware update process.