Dell MD36XXi iSCSI RAID Controller, v.CFW 07.80.41.60 and NVSRAM N26X0-780890-901, A04
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
MD36x0i (iSCSI) series Controller Firmware and NVSRAM
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
This release of the RAID controller firmware 07.80.41.60 adds the following new features:
* Support for larger than 2TB physical disks.
* Support for up to 192 physical disks.
--- By default, the storage arrays support up to 120 physical disks.
--- The support for more than 120 physical disks is offered through a premium feature option.
* Snapshot rollback.
* Snapshot scheduler.
* Simple performance monitor.
* MD Storage Manager operation completion progress indicator for prolonged operations.
* Support for 16 snapshots per LUN with a total of 256 snapshots per storage array.
* Support for 512 virtual disks.
--- Note: The actual number of virtual disks which a single host can access depends on the host operating system and cannot exceed 256 virtual disks per host.
* Added support for the following operating systems:
--- Microsoft Windows Server 2008 R2 SP1
--- Red Hat Enterprise Linux 5.6
--- Red Hat Enterprise Linux 5.7
--- Red Hat Enterprise Linux 6.1
------ Note: Red Hat Enterprise Linux 6.0 is not supported.
--- SUSE Linux Enterprise Server 10 SP4
--- VMware ESX 4.1 Update 1
--- VMware ESXi 5
=====================================================
Previous Releases
=====================================================
Fixes for CFW 07.75.28.60 and NVSRAM N26X0-775890-909
=====================================================
- Code fix to resolve a BBU learn cycle issue.
- Code fix to resolve a lockdown/panic situation caused by conflicting iSCSI initiator record in memory and that in persistent controller database.
- Code fix to resolve an incorrect display of management port IP address if management network cable is reseated during controller(s) boot up.
- Code fix to resolve a possible occurrence of invalid management port IP address if a change of management port from static IP to DHCP was enabled.
- Code fix to display complete diagnostic information on management port in the support bundle.
Fixes for CFW 07.75.14.62 and NVSRAM N26X0-775890-909
=====================================================
- Remedy for low probability I/O path issue
Fixes for CFW 07.75.14.61 and NVSRAM N26X0-775890-909
=====================================================
- Added fix to prevent false cache backup device errors
Fixes for CFW 07.75.14.60 and NVSRAM N26X0-775890-909
=====================================================
- Addressed “Automatic Simplex Downgrade” behaviors during service events
- Resolved “Unresolved ITA in the Database” message in the support logs
閱讀更多* Support for larger than 2TB physical disks.
* Support for up to 192 physical disks.
--- By default, the storage arrays support up to 120 physical disks.
--- The support for more than 120 physical disks is offered through a premium feature option.
* Snapshot rollback.
* Snapshot scheduler.
* Simple performance monitor.
* MD Storage Manager operation completion progress indicator for prolonged operations.
* Support for 16 snapshots per LUN with a total of 256 snapshots per storage array.
* Support for 512 virtual disks.
--- Note: The actual number of virtual disks which a single host can access depends on the host operating system and cannot exceed 256 virtual disks per host.
* Added support for the following operating systems:
--- Microsoft Windows Server 2008 R2 SP1
--- Red Hat Enterprise Linux 5.6
--- Red Hat Enterprise Linux 5.7
--- Red Hat Enterprise Linux 6.1
------ Note: Red Hat Enterprise Linux 6.0 is not supported.
--- SUSE Linux Enterprise Server 10 SP4
--- VMware ESX 4.1 Update 1
--- VMware ESXi 5
=====================================================
Previous Releases
=====================================================
Fixes for CFW 07.75.28.60 and NVSRAM N26X0-775890-909
=====================================================
- Code fix to resolve a BBU learn cycle issue.
- Code fix to resolve a lockdown/panic situation caused by conflicting iSCSI initiator record in memory and that in persistent controller database.
- Code fix to resolve an incorrect display of management port IP address if management network cable is reseated during controller(s) boot up.
- Code fix to resolve a possible occurrence of invalid management port IP address if a change of management port from static IP to DHCP was enabled.
- Code fix to display complete diagnostic information on management port in the support bundle.
Fixes for CFW 07.75.14.62 and NVSRAM N26X0-775890-909
=====================================================
- Remedy for low probability I/O path issue
Fixes for CFW 07.75.14.61 and NVSRAM N26X0-775890-909
=====================================================
- Added fix to prevent false cache backup device errors
Fixes for CFW 07.75.14.60 and NVSRAM N26X0-775890-909
=====================================================
- Addressed “Automatic Simplex Downgrade” behaviors during service events
- Resolved “Unresolved ITA in the Database” message in the support logs
繁體中文版
CFW 07.80.41.60 and NVSRAM N26X0-780890-901, A04
發佈日期
26 9月 2011
下載類型
韌體
類別
iSCSI RAID
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式
檔案格式： 將檔案直接解壓縮至本機磁碟
檔案名稱： Dell_MD36xxi_CFW_07804160_A04_R315137.zip
檔案大小： 53.04 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案格式內含檔案封存，且該封存可能會解壓縮到硬碟上的目錄。接著就可以在該目錄中完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
48ae25f5f51ba712128230b6696e02d2
SHA1：
不適用
SHA-256：
不適用
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
支援的作業系統
Novell SuSE Linux ES 11
Windows Server 2008 x64
Suse Linux ES 10
Red Hat® Enterprise Linux 6
Red Hat® Enterprise Linux 5
Windows 7, 32-bit
Windows 7, 64-bit
Windows Vista, 32-bit
Windows Server 2008 x86
Windows Server 2003
Windows Server 2008 R2
MS Windows Vista 64 位元
Windows XP
Windows Server 2003 x64
安裝指示
Custom Instructions for Dell_MD36xxi_CFW_07804160_A04_R315137.zip:
ATTENTION: This firmware package requires Dell PowerVault MD Series Storage Software Resource DVD version 3.0.0.18 or higher to be installed prior to the RAID controller firmware update.
======================================================================
Firmware Upgrade Instructions
======================================================================
IMPORTANT: It is highly recommended to gather support information from the "Support" tab of the MD Storage Manager prior to performing any firmware upgrade operations. This can also be achieved through the SMcli using the 'save storageArray supportData file="filename"' command.
If your PowerVault MD3200/MD3600 series storage array is currently running firmware version 07.70.xx.xx or 07.75.xx.xx, you cannot directly install the RAID controller firmware update version 07.80.xx.xx included in this release.
Instead, you must first install bridge firmware version 07.75.28.60. After the bridge firmware is successfully installed, you can then install RAID controller firmware 07.80.xx.xx.
Specifically, follow these steps:
1. Download and activate RAID controller bridge firmware version 07.75.28.60.
2. Wait until the bridge firmware installation is completed successfully.
3. Wait at least thirty minutes to allow the attached hosts to re-discover the storage array.
4. Download and activate the RAID controller firmware version 07.80.xx.xx and the NVSRAM configuration file version N26X0-780890-x01.
*** WARNING ***
If you have a single controller PowerVault MD3200/MD3600 series storage array you must stop all I/O operations before starting the firmware upgrade.
======================================================
Upgrading RAID Controller Firmware Using MD Storage Manager
======================================================
1. Launch Dell Modular Disk Storage Manager
2. Select your storage array from the drop down box in the upper left hand corner.
3. Click the Support tab
4. Click "Download Firmware"
If upgrading both the RAID Controller firmware and the NVSRAM:
5. Click "Download RAID Controller Module Firmware"
6. Click "Select File". Choose the RAID Controller Firmware file from the directory that you extracted it to. Click OK.
7. Select "Transfer NVSRAM file with RAID controller module firmware".
8. Click "Select File". Choose the RAID controller module NVSRAM file from the directory that you extracted it in. Click OK.
9. Click "Transfer" to initiate the upgrade.
If upgrading only the RAID Controller firmware:
5. Click "Download RAID Controller Module Firmware"
6. Click "Select File". Choose the RAID Controller Firmware file from the directory that you extracted it to. Click OK.
7. Click "Transfer" to initiate the upgrade.
If upgrading only the NVSRAM:
5. Click "Download RAID Controller Module NVSRAM"
6. Click "Select File". Choose the RAID Controller NVSRAM file from the directory that you extracted it to. Click OK.
7. Click "Transfer" to initiate the upgrade.
ATTENTION: This firmware package requires Dell PowerVault MD Series Storage Software Resource DVD version 3.0.0.18 or higher to be installed prior to the RAID controller firmware update.
======================================================================
Firmware Upgrade Instructions
======================================================================
IMPORTANT: It is highly recommended to gather support information from the "Support" tab of the MD Storage Manager prior to performing any firmware upgrade operations. This can also be achieved through the SMcli using the 'save storageArray supportData file="filename"' command.
If your PowerVault MD3200/MD3600 series storage array is currently running firmware version 07.70.xx.xx or 07.75.xx.xx, you cannot directly install the RAID controller firmware update version 07.80.xx.xx included in this release.
Instead, you must first install bridge firmware version 07.75.28.60. After the bridge firmware is successfully installed, you can then install RAID controller firmware 07.80.xx.xx.
Specifically, follow these steps:
1. Download and activate RAID controller bridge firmware version 07.75.28.60.
2. Wait until the bridge firmware installation is completed successfully.
3. Wait at least thirty minutes to allow the attached hosts to re-discover the storage array.
4. Download and activate the RAID controller firmware version 07.80.xx.xx and the NVSRAM configuration file version N26X0-780890-x01.
*** WARNING ***
If you have a single controller PowerVault MD3200/MD3600 series storage array you must stop all I/O operations before starting the firmware upgrade.
======================================================
Upgrading RAID Controller Firmware Using MD Storage Manager
======================================================
1. Launch Dell Modular Disk Storage Manager
2. Select your storage array from the drop down box in the upper left hand corner.
3. Click the Support tab
4. Click "Download Firmware"
If upgrading both the RAID Controller firmware and the NVSRAM:
5. Click "Download RAID Controller Module Firmware"
6. Click "Select File". Choose the RAID Controller Firmware file from the directory that you extracted it to. Click OK.
7. Select "Transfer NVSRAM file with RAID controller module firmware".
8. Click "Select File". Choose the RAID controller module NVSRAM file from the directory that you extracted it in. Click OK.
9. Click "Transfer" to initiate the upgrade.
If upgrading only the RAID Controller firmware:
5. Click "Download RAID Controller Module Firmware"
6. Click "Select File". Choose the RAID Controller Firmware file from the directory that you extracted it to. Click OK.
7. Click "Transfer" to initiate the upgrade.
If upgrading only the NVSRAM:
5. Click "Download RAID Controller Module NVSRAM"
6. Click "Select File". Choose the RAID Controller NVSRAM file from the directory that you extracted it to. Click OK.
7. Click "Transfer" to initiate the upgrade.