Seagate ST95005620AS Firmware Update
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
This package provides the Windows/DOS based Seagate ST95005620AS (500G, 2.5", 9.5mm, SATA, 3Gb/s, 7200, 512n, SSH) Firmware Update and is supported on Alienware and Optiplex models that are running the following Operating Systems: DOS, XP, Vista and Windows 7.
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes - Not Applicable Enhancements - Enhanced the hard drive performance
閱讀更多繁體中文版
DEM4, A01
發佈日期
31 10月 2011
下載類型
韌體
類別
儲存
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容,並且可能包含其他新功能。
檔案格式: 將檔案直接解壓縮至本機磁碟
檔案名稱: MX35DEM4.zip
檔案大小: 8.64 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案格式內含檔案封存,且該封存可能會解壓縮到硬碟上的目錄。接著就可以在該目錄中完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
4a00d2d5c264af24c916b99b6a9b4e05
SHA1:
不適用
SHA-256:
不適用
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
Windows 7, 32-bit
Windows 7, 64-bit
Windows Vista, 32-bit
MS Windows Vista 64 位元
Windows XP
Windows XP, 64-bit
Windows based firmware update for ST95005620AS: 1. Download and unzip "MX35DEM4.zip" into your desktop. 2. In "MX35DEM4" folder, please search for the "Windows" folder. 3. Double click "MX000050.EXE" and it will begin to run. On the first screen you will select your language, and then select "OK". The next screen is a warning screen, please read and select "Next" if you agree. The next screen is the License Agreement screen. If you agree, click "I agree" and then click "Next". 4. You will then come to the screen that asks you to close and save all applications and to back up your data. When you are ready to start the firmware update, please check the "Begin firmware update procedure", and then click "Proceed". 5. The system will reboot and load the firmware. Once the firmware update is complete the system will boot up into Windows normally. DOS based firmware update for ST95005620AS: 1. Unzip "MX35DEM4.zip" into your bootable USB key. Boot up the computer with USB key. 2.In "Dos" folder, just type "DEM4.BAT" at the DOS prompt and press the enter key. 3. Your system will now start updating the HDD firmware. Once the firmware update is completed, your system will display a "DRIVE PASSED" message. 4. Remove your USB key, and turn off your system using the computers power button. Once the computer has been powered down, you can now turn the computer on normally.