Intel LS-120 Drive, v. 101, A00
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
LS-120 Drive Firmare Utility
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
This utility updates the firmware on the LS-120 Drive, DP/N 042YKW, used on the Dell PowerEdge 7150 platform. It must be run from the EFI
shell.
閱讀更多shell.
繁體中文版
101, A00
發佈日期
10 6月 2002
下載類型
韌體
類別
移動存儲裝置
重要性
選用Dell Technologies 建議您檢閱此更新，以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態，或其提供的新功能不一定適用於您的環境。
可用的格式
檔案格式： 自動解壓縮 zip 檔之中有一個以上的自動解壓縮磁碟影像
檔案名稱： B6T70600.exe
檔案大小： 493.5 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後按兩下以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
不適用
SHA1：
不適用
SHA-256：
不適用
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
安裝指示
Hard Drive Floppy Disk Creation for B6T70600.exe
1. Get 1 blank, formatted floppy disks.
2. Click the new icon on the desktop. The Self-Extractor window
appears.
3. Click Setup. An MS-DOS window appears with a message indicating
that you need 1 floppy diskettes.
4. Press the [ENTER] key. A message appears prompting you to insert
a blank floppy diskette. Insert a floppy disk into the floppy disk drive.
5. Press the [ENTER] key. A message appears indicating that all data
on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key. The files are
copied to the floppy diskette. Once the files have been copied to the
diskette a message appears prompting you to insert the second diskette.
7. Repeat steps 4 – 6 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk,
press the [ENTER] key and the MS-DOS window closes.
The unpack utility is DOS based. Run the executable file on a Windows
based machine (not IA64), the
following files will be unpacked and copied to a standard 1.44MB formatted
floppy.
Auto.prm
C936M924.bin
FL16.efi
Loader.bin
Update.nsh
Place the floppy in the Ls-120 drive and
Boot to the EFI Boot Manager Screen
Select the EFI Boot option
Should see the Device mapping table
Look for the FS#'s to identify the Floppy, CDROM, and Hard Drives
The LS-120 will have a description of Primary Master or Device 00.
The Hard Drive will have a description of Scsi or Device 80.
The command "map –r" will remap the devices.
If the Device 80 or Scsi is FS1 then type: "FS1:" to change to the
hard drive.
Type: "dir" to print a directory to the screen.
This is the main directory where the files should be copied.
Should also see the dellup Directory.
Copy the five files to the hard drive, (verify fs0 corresponds to the
floppy drive)
type: "copy fs0:auto.prm"
the response should be fs0:\auto.prm -> fs1:\auto.prm[ok]
Type: "update"
the utility will begin the following should appear on the screen.
Beginning Update Process
New revision (file): C936M924
Old revision (ROM): C932M923
Note: If the Old revision number does not appear here then this drive
cannot be updated !
Continue with the update of the Flash-EEPROM? (y/n)
Type: "y"
Loader F/W Revision: 101
Erase Processing
Erase OK
Write Processing
Write OK
Flash Load: OK
The flash has completed and you are then returned to the EFI Prompt.
1. Get 1 blank, formatted floppy disks.
2. Click the new icon on the desktop. The Self-Extractor window
appears.
3. Click Setup. An MS-DOS window appears with a message indicating
that you need 1 floppy diskettes.
4. Press the [ENTER] key. A message appears prompting you to insert
a blank floppy diskette. Insert a floppy disk into the floppy disk drive.
5. Press the [ENTER] key. A message appears indicating that all data
on the disk will be erased.
6. Press the [y] key and then press the [ENTER] key. The files are
copied to the floppy diskette. Once the files have been copied to the
diskette a message appears prompting you to insert the second diskette.
7. Repeat steps 4 – 6 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk,
press the [ENTER] key and the MS-DOS window closes.
The unpack utility is DOS based. Run the executable file on a Windows
based machine (not IA64), the
following files will be unpacked and copied to a standard 1.44MB formatted
floppy.
Auto.prm
C936M924.bin
FL16.efi
Loader.bin
Update.nsh
Place the floppy in the Ls-120 drive and
Boot to the EFI Boot Manager Screen
Select the EFI Boot option
Should see the Device mapping table
Look for the FS#'s to identify the Floppy, CDROM, and Hard Drives
The LS-120 will have a description of Primary Master or Device 00.
The Hard Drive will have a description of Scsi or Device 80.
The command "map –r" will remap the devices.
If the Device 80 or Scsi is FS1 then type: "FS1:"
hard drive.
Type: "dir" to print a directory to the screen.
This is the main directory where the files should be copied.
Should also see the dellup Directory.
Copy the five files to the hard drive, (verify fs0 corresponds to the
floppy drive)
type: "copy fs0:auto.prm"
the response should be fs0:\auto.prm -> fs1:\auto.prm[ok]
Type: "update"
the utility will begin the following should appear on the screen.
Beginning Update Process
New revision (file): C936M924
Old revision (ROM): C932M923
Note: If the Old revision number does not appear here then this drive
cannot be updated !
Continue with the update of the Flash-EEPROM? (y/n)
Type: "y"
Loader F/W Revision: 101
Erase Processing
Erase OK
Write Processing
Write OK
Flash Load: OK
The flash has completed and you are then returned to the EFI Prompt.