請勿在更新 BIOS 時將電腦關機或拔除電源,電腦可能因此受損。更新期間,電腦將重新啟動,並且會暫時顯示黑色畫面。
更新前,請閱讀以下所述的安裝說明與重要資訊。
Dell PowerVault BIOS, A06
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
PowerVault 715N, BIOS, version A06
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
This BIOS version provides the latest hardware support for the PV715N
閱讀更多繁體中文版
A06, A06
發佈日期
19 9月 2002
下載類型
系統 BIOS
類別
BIOS
重要性
選用Dell Technologies 建議您檢閱此更新,以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態,或其提供的新功能不一定適用於您的環境。
檔案格式: 將檔案直接解壓縮至本機磁碟
檔案名稱: 715NA06.exe
檔案大小: 469.14 KB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
Default Instructions for 715NA06.exe:
To upgrade your system BIOS, perform the following steps:
1. Download the 715NA06 BIOS revision.
2. Run the downloaded executable file to extract the files to your hard
drive. The default extraction directory is c:\Dell\PV715NBIOS.
3. Using a null modem serial cable, connect the client system to the
appliance.
4. Turn on the client system and set up a Hyperterminal connection.
a. Click the Start button and point to Programs—>Accessories—
>Hyperterminal —>Hyperterminal.
b. Select 115200 for the Bits per second, 8 for Data Bits, None for
Parity, 1 for Stop Bits, and Xon\Xoff for Flow control.
5. Restart the appliance.
6. Press F2 immediately after you see the following message: "Press F2 to
enter the Function Select menu"
NOTE: If you use a version of Windows 2000 earlier than Service Pack 2,
the function keys do not work. You must press Esc-2.
If you wait too long and your operating system begins to load into memory,
allow the system to complete the load operation, and then shut down the
system and try again.
7. When the Function Select menu appears, press "5" to update the BIOS
Flash ROM.
8. When a message appears asking if you want to update the BIOS,
press "y".
9. When the message Flash System BIOS appears in the HyperTerminal window,
click Transfer, and then select Send File.
10. When the Send File dialog appears, click Browse and select the
downloaded BIOS file.
11. Select XModem on the Protocol menu, and then click Send.
The client system sends the file to the appliance and automatically
updates the BIOS. The appliance beeps four times, and then reboots
automatically.
To upgrade your system BIOS, perform the following steps:
1. Download the 715NA06 BIOS revision.
2. Run the downloaded executable file to extract the files to your hard
drive. The default extraction directory is c:\Dell\PV715NBIOS.
3. Using a null modem serial cable, connect the client system to the
appliance.
4. Turn on the client system and set up a Hyperterminal connection.
a. Click the Start button and point to Programs—>Accessories—
>Hyperterminal —>Hyperterminal.
b. Select 115200 for the Bits per second, 8 for Data Bits, None for
Parity, 1 for Stop Bits, and Xon\Xoff for Flow control.
5. Restart the appliance.
6. Press F2 immediately after you see the following message: "Press F2 to
enter the Function Select menu"
NOTE: If you use a version of Windows 2000 earlier than Service Pack 2,
the function keys do not work. You must press Esc-2.
If you wait too long and your operating system begins to load into memory,
allow the system to complete the load operation, and then shut down the
system and try again.
7. When the Function Select menu appears, press "5" to update the BIOS
Flash ROM.
8. When a message appears asking if you want to update the BIOS,
press "y".
9. When the message Flash System BIOS appears in the HyperTerminal window,
click Transfer, and then select Send File.
10. When the Send File dialog appears, click Browse and select the
downloaded BIOS file.
11. Select XModem on the Protocol menu, and then click Send.
The client system sends the file to the appliance and automatically
updates the BIOS. The appliance beeps four times, and then reboots
automatically.