Dell Software Update Package (SUP), A00-00
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
Adding support of Seagate Cheetah V 36GB hard drives, model number ST336605FC/FCV (Dell p/n
9W190 or K2825), to the PV720/740/760N systems. This zip file contains the qual_devices.txt file (qual device table), the readme.txt file (how to instructions) as well as the tech sheet.
9W190 or K2825), to the PV720/740/760N systems. This zip file contains the qual_devices.txt file (qual device table), the readme.txt file (how to instructions) as well as the tech sheet.
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
This release allows a customer to replace existing FC hard drives, model numbers ST318304FC/FCV
(Dell p/n 17JTM- 18GB) and ST336704FC/FCV (Dell p/n 50GMD) in PV720/740/760N systems with the
Seagate Cheetah V FC hard drive, model number ST336605FC/FCV (Dell p/n 9W190 or K2825) as a hot swap.
Support of the newer Seagate hard drives on PV720/740/760N requires an updated qual device table.
This release provides the qual device table and procedure. This procedure assumes that the hard
drives have NetApp firmware version NA04.
閱讀更多(Dell p/n 17JTM- 18GB) and ST336704FC/FCV (Dell p/n 50GMD) in PV720/740/760N systems with the
Seagate Cheetah V FC hard drive, model number ST336605FC/FCV (Dell p/n 9W190 or K2825) as a hot swap.
Support of the newer Seagate hard drives on PV720/740/760N requires an updated qual device table.
This release provides the qual device table and procedure. This procedure assumes that the hard
drives have NetApp firmware version NA04.
繁體中文版
A00-00, A00-00
發佈日期
31 1月 2003
下載類型
作業系統
類別
系統公用程式
重要性
選用Dell Technologies 建議您檢閱此更新,以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態,或其提供的新功能不一定適用於您的環境。
檔案格式: 將檔案直接解壓縮至本機磁碟
檔案名稱: 700N_qualCV.zip
檔案大小: 139.28 KB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
Default Instructions for 700N_qualCV.zip:
How to appropriately use the qual_devices file.
Once obtained, the qual_devices file should not be opened, edited or
saved in a windows format as this corrupts the qual_devices file.
1. From a windows client map to the root directory of the filer:
\\\c$\etc
2. Find the qual_devices file and rename to qual_devices1.
3. Place the diskette with the qual_devices file in the Windows client.
4. Drag and drop the qual_devices file from the a: drive to the
\\filer\c$\etc directory.
5. Attach the null modem cable from the client to the filer and open a
hyper terminal session before moving to step 6.
6. Attach the DAE to the current enclosure via the second port on the
LCC module that is currently connected to the filer.
To use hyper terminal with the filer you will need a null modem cable to
connect from the COM1 on your Windows client to the Console port on the
back of the filer.
To verify that this file worked correctly, open a hyper terminal session
using the following settings and view the drive initialization.
Bits per Sec: 9600
Data Bits: default
Parity: default
Stop bits: default
Flow Control: none
How to appropriately use the qual_devices file.
Once obtained, the qual_devices file should not be opened, edited or
saved in a windows format as this corrupts the qual_devices file.
1. From a windows client map to the root directory of the filer:
\\
2. Find the qual_devices file and rename to qual_devices1.
3. Place the diskette with the qual_devices file in the Windows client.
4. Drag and drop the qual_devices file from the a: drive to the
\\filer\c$\etc directory.
5. Attach the null modem cable from the client to the filer and open a
hyper terminal session before moving to step 6.
6. Attach the DAE to the current enclosure via the second port on the
LCC module that is currently connected to the filer.
To use hyper terminal with the filer you will need a null modem cable to
connect from the COM1 on your Windows client to the Console port on the
back of the filer.
To verify that this file worked correctly, open a hyper terminal session
using the following settings and view the drive initialization.
Bits per Sec: 9600
Data Bits: default
Parity: default
Stop bits: default
Flow Control: none