Dell OpenManage Array Manager, v.3.4.1.532.5, A01
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
Array Manager software provides a comprehensive storage management solution in an integrated, graphical view. From a single location, Array Manager enables you to configure and manage local and remote storage attached to a server, while the server is online and continuing to process requests.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
* Array Manager 3.4.1 addresses a known problem with using the ASPI
4.7.x driver with the PERC 4/Di controller in SCSI-SCSI mode.
These problems include system hangs and blue screens. Array
Manager 3.4.1 requires the ASPI 4.6 driver for non-RAID SCSI
support. In addition, Array Manager 3.4.1 cannot be installed on
a system with the ASPI 4.7.x driver.
If you have the ASPI 4.7.x driver installed on your system, you
need to remove this driver and install the ASPI 4.6 driver. You
can do this by downloading the ASPI 4.6 package from the Dell
support site. The ASPI 4.6 package uninstalls the ASPI 4.7.x
driver and installs the ASPI 4.6 driver. Refer to the documentation
of any other applications installed on the system to see if those
applications have known problems with the ASPI 4.6 driver
閱讀更多4.7.x driver with the PERC 4/Di controller in SCSI-SCSI mode.
These problems include system hangs and blue screens. Array
Manager 3.4.1 requires the ASPI 4.6 driver for non-RAID SCSI
support. In addition, Array Manager 3.4.1 cannot be installed on
a system with the ASPI 4.7.x driver.
If you have the ASPI 4.7.x driver installed on your system, you
need to remove this driver and install the ASPI 4.6 driver. You
can do this by downloading the ASPI 4.6 package from the Dell
support site. The ASPI 4.6 package uninstalls the ASPI 4.7.x
driver and installs the ASPI 4.6 driver. Refer to the documentation
of any other applications installed on the system to see if those
applications have known problems with the ASPI 4.6 driver
繁體中文版
3.4.1.532.5, A01
發佈日期
21 11月 2003
下載類型
應用程式
類別
系統管理
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式
檔案格式： 將檔案直接解壓縮至本機磁碟
檔案名稱： m3415325.exe
檔案大小： 37.21 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
檔案格式： 外部版本資訊
檔案名稱： rdme341.txt
檔案大小： 48.2 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
安裝指示
Custom Instructions for rdme341.txt:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Custom Instructions for m3415325.exe:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-
click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Installation
1. Browse to the folder where extracted the download package.
2. Double click on setup.exe win the Setup” folder. Setup should start
automatically
3. Follow the instructions shown in the Setup wizard.
Note: If you get an error message saying "An unsupported version of
ASPI has been detected on your system..." you must download the
ASPI 4.6 package from the support.dell.com website. Following the
ASPI 4.6 package instructions will uninstall the ASPI 4.7.x driver and
install the ASPI 4.6 driver, thus enabling installation of Array Manager
3.4.1. Refer to the documentation of any other applications installed on
the system to see if those applications have known problems with the
ASPI 4.6 driver.
4. Reboot the system when finished.
NOTE: When installing the managed system component on a Windows
2000 system, the Windows 2000 Plug and Play Manager will activate
after the reboot, indicating it discovered new hardware. You may be
required to perform a second reboot if volumes are present on your
system. Otherwise, allow Plug and Play to register the new driver. (This
occurs automatically.)
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Custom Instructions for m3415325.exe:
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I
agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file
to your hard drive.
Extract Files
1. Browse to the location where you downloaded the file and double-
click the new file to unzip the download package.
2. Specify the location to unzip the files.
3. Click on the unzip button to extract files.
Installation
1. Browse to the folder where extracted the download package.
2. Double click on setup.exe win the Setup” folder. Setup should start
automatically
3. Follow the instructions shown in the Setup wizard.
Note: If you get an error message saying "An unsupported version of
ASPI has been detected on your system..." you must download the
ASPI 4.6 package from the support.dell.com website. Following the
ASPI 4.6 package instructions will uninstall the ASPI 4.7.x driver and
install the ASPI 4.6 driver, thus enabling installation of Array Manager
3.4.1. Refer to the documentation of any other applications installed on
the system to see if those applications have known problems with the
ASPI 4.6 driver.
4. Reboot the system when finished.
NOTE: When installing the managed system component on a Windows
2000 system, the Windows 2000 Plug and Play Manager will activate
after the reboot, indicating it discovered new hardware. You may be
required to perform a second reboot if volumes are present on your
system. Otherwise, allow Plug and Play to register the new driver. (This
occurs automatically.)