LSI Logic CERC ATA 100, v.6.67, A06
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
Dell PowerEdge CERC ATA100/4CH Controller Firmware Update
Version: 6.67
Version: 6.67
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
RELEASE NOTES FOR CERC ATA100/4ch FIRMWARE
==========================================
Current Firmware - 6.67
(Previous - 6.66)
Current BIOS - 1.04
(Previous - 1.04)
Current Ctrl-M - 5a42
(Previous - 5a42)
Current Boot Block - 1.4.3
(Previous - 1.4.3)
Current Web BIOS - 1.43
(Previous - 1.43)
Firmware Enhancements and Bug Fixes (from v.6.66):
When a drive on secondary channel is removed, the other drive on primary channel is sometimes not responding, so firmware gets time-out. FW retries for 3 times if a command is timed-out before failing the drive.
Whenever FW retries, a variable called "retry count" is updated to hold the information of how many retries have been carried out. This variable was not cleared properly for a fresh command. It held the "old" value. This was causing FW not to retry the timed-out command for the drive on primary channel and fail the drive following the very first time-out error.
The variable retry count is properly cleared now and the problem is fixed.
閱讀更多==========================================
Current Firmware - 6.67
(Previous - 6.66)
Current BIOS - 1.04
(Previous - 1.04)
Current Ctrl-M - 5a42
(Previous - 5a42)
Current Boot Block - 1.4.3
(Previous - 1.4.3)
Current Web BIOS - 1.43
(Previous - 1.43)
Firmware Enhancements and Bug Fixes (from v.6.66):
When a drive on secondary channel is removed, the other drive on primary channel is sometimes not responding, so firmware gets time-out. FW retries for 3 times if a command is timed-out before failing the drive.
Whenever FW retries, a variable called "retry count" is updated to hold the information of how many retries have been carried out. This variable was not cleared properly for a fresh command. It held the "old" value. This was causing FW not to retry the timed-out command for the drive on primary channel and fail the drive following the very first time-out error.
The variable retry count is properly cleared now and the problem is fixed.
繁體中文版
6.67, A06
發佈日期
09 3月 2004
下載類型
韌體
類別
IDE/EIDE
重要性
選用Dell Technologies 建議您檢閱此更新,以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態,或其提供的新功能不一定適用於您的環境。
檔案格式: 適用於 MS Windows (32 位元) 的更新套件
檔案名稱: RAID-FRMW-R73946.exe
檔案大小: 1.63 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計,可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時,請務必選擇適用您作業系統的更新。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
998A4DA26029E20303F9AC69DE110F5C
SHA1:
不適用
SHA-256:
不適用
檔案格式: 自動解壓縮 zip 檔之中有一個以上的自動解壓縮磁碟影像
檔案名稱: CERC-FW667.exe
檔案大小: 861.14 KB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾,然後按兩下以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
不適用
SHA1:
不適用
SHA-256:
不適用
檔案格式: 外部版本資訊
檔案名稱: CERC-FW667.txt
檔案大小: 4.81 KB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
MS-DOS
Windows 2000
Windows Powered
CERC ATA 100
Custom Instructions for CERC-FW667.txt:
See Release Notes...
Custom Instructions for CERC-FW667.exe:
Note: In order to create this diskette, the file must be downloaded to and executed on a system running Microsoft Windows.
Download
1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.
Diskette Creation
1. Browse to the location where you downloaded the file and double-click the new file to create the diskette set.
2. Insert a blank diskette then click Continue.
3. When prompted, repeat step 2 until you reach the end of the diskette set. Label each diskette with a disk number starting from 1.
4. After all the files have been copied to the last diskette, click Finish.
Installation
1. Insert the diskette into the system with the RAID controller for which you want to update the firmware and reboot the system.
2. Follow the instructions on the screen to update the firmware.
NOTICE: pflash.exe will be executed automatically and will report existing code level and prompt you to reconfirm before starting the firmware upgrade process.
To perform this process in non-interactive mode please execute,
pflash /? and read about possible command line switches.
3) Remove the diskette and reboot the system.
Dell Update Package Instructions for RAID-FRMW-R73946.exe:
Download
1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Install any necessary Embedded Systems Management firmware prior to this BIOS update.
5. Click the Install button.
6. Follow the remaining prompts to perform the update.