Dell ESM Firmware, A58
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題,可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋,請填寫頁面底部的表單。
The Embedded Server Management (ESM) flash utility is a tool to update firmware(FW) to the Embedded Server Management and all devices connected to it on the system management bus (SMB). The devices currently implemented in the utility are:
* Embedded Server Management,
* System backplane,
* System power supply paralleling board (PSPB),
* Hotplug.
This firmware update is a non-destructive update. User data is not affected.
* Embedded Server Management,
* System backplane,
* System power supply paralleling board (PSPB),
* Hotplug.
This firmware update is a non-destructive update. User data is not affected.
建議
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
GBP v1.32
- Added code to prevent false backplane voltage and temperature errors by adding a more robust I2C recovery and widening the voltage thresholds.
閱讀更多- Added code to prevent false backplane voltage and temperature errors by adding a more robust I2C recovery and widening the voltage thresholds.
繁體中文版
A58, A58
發佈日期
07 12月 2004
下載類型
韌體
類別
內嵌式伺服器管理
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容,並且可能包含其他新功能。
檔案格式: 適用於 MS Windows (32 位元) 的更新套件
檔案名稱: ESM-WIN-A58.exe
檔案大小: 1.94 MB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計,可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時,請務必選擇適用您作業系統的更新。
為了確保下載的完整性,請驗證總和檢查值。
MD5:
374F46AE0B835240B65AF81C23E387DD
SHA1:
不適用
SHA-256:
不適用
檔案格式: 將檔案直接解壓縮至本機磁碟
檔案名稱: a58cust.exe
檔案大小: 403 KB
此為大型檔案。視您的連線速度而定,下載可能需要一些時間。
格式說明:
當您開始下載,即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
Custom Instructions for a58cust.exe:
1. Download the .exe file to a directory on your hard drive. The file
downloaded is a self-extracting executable.
2. Execute the downloaded file and follow the on-screen instructions.
The files may be un-zipped to floppy disk or hard drive(if the hard drive
is in the system to be updated).
3. After the files have been un-zipped, you may delete the self-
extracting file downloaded in step 1.
MS-DOS Version
1. Boot the system requiring the update to DOS.
2. Insert the diskette created above or change to the directory on the
hard drive where the files were un-zipped.
3. At the DOS prompt, type "SMFLSH". This will run SMFLSH.EXE
4. Answer “Y” at the prompt to begin the upgrade.
Windows NT/2000 Version
Note: You must have the Dell Management software or OpenManage
Server Administrator installed to proceed.
There are two methods of upgrade in Windows NT/2000.
1. In a DOS window, change to the directory the files were un-zipped to
and type “SMFLSHNT”. Answer “Y” at the prompt to begin the upgrade.
2. Using Windows Explorer, browse to the location containing the files
un-zipped above(diskette or hard drive). Run(double-click)
SMFLSHNT.EXE and answer “Y” at the prompt to begin the upgrade.
1. Download the .exe file to a directory on your hard drive. The file
downloaded is a self-extracting executable.
2. Execute the downloaded file and follow the on-screen instructions.
The files may be un-zipped to floppy disk or hard drive(if the hard drive
is in the system to be updated).
3. After the files have been un-zipped, you may delete the self-
extracting file downloaded in step 1.
MS-DOS Version
1. Boot the system requiring the update to DOS.
2. Insert the diskette created above or change to the directory on the
hard drive where the files were un-zipped.
3. At the DOS prompt, type "SMFLSH". This will run SMFLSH.EXE
4. Answer “Y” at the prompt to begin the upgrade.
Windows NT/2000 Version
Note: You must have the Dell Management software or OpenManage
Server Administrator installed to proceed.
There are two methods of upgrade in Windows NT/2000.
1. In a DOS window, change to the directory the files were un-zipped to
and type “SMFLSHNT”. Answer “Y” at the prompt to begin the upgrade.
2. Using Windows Explorer, browse to the location containing the files
un-zipped above(diskette or hard drive). Run(double-click)
SMFLSHNT.EXE and answer “Y” at the prompt to begin the upgrade.