Dell SAS 5/iR Adapter Firmware Update
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This package provides the driver for Dell SAS 5/iR Adapter Firmware Update and is supported on Enterprise Servers, Precision and Powervault models that are running the following Operating System: NA.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes
- Fixed an issue that causes errors during cable disconnect scenarios when connected to a Dell MD3000 enclosure
- Addressed an issue where interrupt warnings were seen during Operating system installations
- Fixed an issue with rebuild progress reporting in an OS environment
- Modified release script for SAS 5 cards so that it is compatible with other 6th Generation SAS controllers
- Modified the SAS5 Option ROM to improve CHS (Cylinder/Head/Sector) to LBA (Logical Block Address) translation, to add support for newer disk partition utilities
- Disabled option in BIOS to change the "report device missing delay" which could potentially cause timing related issues and performance related issues with attached devices when toggled
Enhancements
- Improved Tape performance on SAS 5/E with External SAS Tape Units
閱讀更多- Fixed an issue that causes errors during cable disconnect scenarios when connected to a Dell MD3000 enclosure
- Addressed an issue where interrupt warnings were seen during Operating system installations
- Fixed an issue with rebuild progress reporting in an OS environment
- Modified release script for SAS 5 cards so that it is compatible with other 6th Generation SAS controllers
- Modified the SAS5 Option ROM to improve CHS (Cylinder/Head/Sector) to LBA (Logical Block Address) translation, to add support for newer disk partition utilities
- Disabled option in BIOS to change the "report device missing delay" which could potentially cause timing related issues and performance related issues with attached devices when toggled
Enhancements
- Improved Tape performance on SAS 5/E with External SAS Tape Units
繁體中文版
00.10.51.00.06.12.05.00, A03
發佈日期
19 12月 2013
下載類型
韌體
類別
SAS RAID
重要性
建議Dell Technologies 建議您在下一個排定的更新週期套用此更新。此更新包含的變更可維持整體的系統健全狀況。此更新可確保系統軟體保持在最新狀態並與其他系統模組 (韌體、BIOS、驅動程式及軟體) 相容，並且可能包含其他新功能。
可用的格式 檢視重要資訊
檔案格式： 適用於 MS Windows (32 位元) 的更新套件
檔案名稱： FRMW_WIN_R168471.EXE
檔案大小： 5.46 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
Microsoft Windows 32 位元格式的 Dell 更新套件 (DUP) 經過精心設計，可在 Microsoft Windows 64 位元作業系統上執行。Microsoft Windows 64 位元格式的 Dell 更新套件 (DUP) 只能在 Microsoft Windows 64 位元作業系統上執行。選擇裝置驅動程式更新時，請務必選擇適用您作業系統的更新。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
D0D4EBD3A9896BF9BBBACCF1316CF204
SHA1：
不適用
SHA-256：
不適用
檔案格式： 自動解壓縮 zip 檔之中有一個以上的自動解壓縮磁碟影像
檔案名稱： BR168471.exe
檔案大小： 929.97 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後按兩下以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
2c2c7d3c8e3b96336d21d7b251d780ad
SHA1：
不適用
SHA-256：
不適用
檔案格式： 包含密碼編譯簽章的 GnuPG 檔案
檔案名稱： FRMW_LX_R168471.BIN.sign
檔案大小： 194 Bytes
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
您可以使用適用於 Red Hat Linux 更新套件的 GnuPG 簽章，在相關聯的 Red Hat Linux 更新套件中驗證 Dell 的身分。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
8DA7A00FEF4514E9EF4797542750151E
SHA1：
不適用
SHA-256：
不適用
檔案格式： ZipPack 外接
檔案名稱： R168471.exe
檔案大小： 757.47 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案內含已壓縮的檔案集。將檔案下載到硬碟上的資料夾，然後執行 (按兩下) 以解壓縮該檔案集。請依照指示完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
不適用
SHA1：
不適用
SHA-256：
不適用
檔案格式： 外部版本資訊
檔案名稱： SAS5ira_external_R168471_A03.txt
檔案大小： 6.45 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案格式內含純文字，可使用標準文字編輯器予以檢視。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
43e1949ebc697b7e4198d922ab5074ab
SHA1：
不適用
SHA-256：
不適用
檔案格式： 適用於 Red Hat Linux 的更新套件
檔案名稱： FRMW_LX_R168471.BIN
檔案大小： 4.74 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
適用於 Linux 的 Dell 更新套件可做為獨立的應用程式，確保符合特定的驗證條件，然後套用更新。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
注意：適用於 Linux 的更新套件為開放原始碼套件。請參閱適用於 Linux 的 Dell 更新套件的「讀我」檔案，瞭解詳情。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
9A0710991EC80B728771554706174DA4
SHA1：
不適用
SHA-256：
不適用
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
WARNING : Flashing back to the previous 6.40 firmware will cause the controller to become inoperable.
適用於
SAS 5/iR Adapter
安裝指示
Dell Update Package Instructions
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Hard Drive Installation (via WinZip) with Setup.exe File
Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install
1.Double-click the new icon on the desktop
2.The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\V7P8M". (Where 'V7P8M' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\V7P8M" (where 'V7P8M' is the name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.
Hard Drive Installation (via WinZip) with Setup.exe File
Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install
1.Double-click the new icon on the desktop
2.The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\V7P8M". (Where 'V7P8M' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\V7P8M" (where 'V7P8M' is the name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.