Micron RealSSD C400 128GB/256GB/512GB 2.5" 7MM Firmware Update
需要重新啟動 已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This package provides the Micron RealSSD C400 128GB/256GB/512GB 2.5" 7MM Firmware Update and is supported on Alienware, Inspiron, Latitude, XPS Notebook, OptiPlex, Precision and Vostro Notebook models that are running the following Windows Operating Systems: Windows 7 and Windows 8.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes
- Fixed issues where SSD may not be detected after a previous forced power cycle.
Enhancements
- Enhanced the device ready time, allowing system to be able to power up quickly.
閱讀更多- Fixed issues where SSD may not be detected after a previous forced power cycle.
Enhancements
- Enhanced the device ready time, allowing system to be able to power up quickly.
繁體中文版
040H, A00-00
發佈日期
04 3月 2013
下載類型
韌體
類別
儲存
重要性
選用Dell Technologies 建議您檢閱此更新，以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態，或其提供的新功能不一定適用於您的環境。
可用的格式 檢視重要資訊
檔案格式： 韌體影像
檔案名稱： Micron C400 7MM 040H.zip
檔案大小： 1.86 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
為了確保下載的完整性，請驗證總和檢查值。
MD5：
8c093ee80739f53404219cbf429f8f35
SHA1：
c4270268c05b006f6c8e7a3e2bca74a1300bc7c7
SHA-256：
8c5339f143d75bac4c397153a4558628754a43d44472fe734adfaf6e27598938
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
1. Equipment needed, a CD drive, a blank CD.
2. Do not POWER OFF the system during the firmware update procedure.
3. Please perform a full system backup before starting the firmware update procedure (highly recommended).
4. Connect your notebook to a AC power supply during the firmware update procedure (highly recommended).
5.The firmware utility tool is OS independent.
2. Do not POWER OFF the system during the firmware update procedure.
3. Please perform a full system backup before starting the firmware update procedure (highly recommended).
4. Connect your notebook to a AC power supply during the firmware update procedure (highly recommended).
5.The firmware utility tool is OS independent.
適用於
Micron RealSSD C400
安裝指示
Backup
1. It is highly recommended that full system backup be completed before starting this firmware upgrade procedure.
Download and image extraction
1. Click Download File to download the zipped file.
2. Extract the file into a folder.
3. The ISO image file is used to burn the utility onto a bootable CD.
Installation
1. Ensure that your notebook is plugged into a AC power supply during the update process (high recommended).
2. DO NOT remove power from the system during the firmware update process.
3. Ensure that your BIOS has been set to ATA or AHCI mode. DO NOT select RAID mode. This utility will not work in RAID mode.
4. Ensure that your BIOS boot order has been set up to boot from CD drive
a. You can do so by either pressing F12 during the boot up and then select CD drive to boot from
b. Or by pressing F2 during the boot up, enter the boot order selection and select CD drive to boot from. Save the setting before exiting.
5. Insert the bootable CD media with ISO image into your system.
6. Reboot the system from the bootable CD media, the firmware update utility will be started automatically.
7. Connected Micron SSD drive that is eligible for the firmware update will be shown on the screen.
8. Select Yes to the request 'Update firmware on this drive?'
9. DO NOT power off the system during the update process, the update will take about 30 to 60 seconds. Some systems may require a longer time to complete.
10. Upon completion, the message 'Current Firmware is: 040H' will be displayed.
1. It is highly recommended that full system backup be completed before starting this firmware upgrade procedure.
Download and image extraction
1. Click Download File to download the zipped file.
2. Extract the file into a folder.
3. The ISO image file is used to burn the utility onto a bootable CD.
Installation
1. Ensure that your notebook is plugged into a AC power supply during the update process (high recommended).
2. DO NOT remove power from the system during the firmware update process.
3. Ensure that your BIOS has been set to ATA or AHCI mode. DO NOT select RAID mode. This utility will not work in RAID mode.
4. Ensure that your BIOS boot order has been set up to boot from CD drive
a. You can do so by either pressing F12 during the boot up and then select CD drive to boot from
b. Or by pressing F2 during the boot up, enter the boot order selection and select CD drive to boot from. Save the setting before exiting.
5. Insert the bootable CD media with ISO image into your system.
6. Reboot the system from the bootable CD media, the firmware update utility will be started automatically.
7. Connected Micron SSD drive that is eligible for the firmware update will be shown on the screen.
8. Select Yes to the request 'Update firmware on this drive?'
9. DO NOT power off the system during the update process, the update will take about 30 to 60 seconds. Some systems may require a longer time to complete.
10. Upon completion, the message 'Current Firmware is: 040H' will be displayed.