Dell Server Deployment Pack Application 2.1
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
This package provides the Dell Server Deployment Pack Application and is supported on Enterprise Servers and Powervault models that are running the following Windows Operating Systems: Windwos Server 2008 and Windwos Server 2012.
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
Fixes
- Fixed the problems which were reported in earlier releases of DSDP and have been corrected in this release.
- Fixed Retain and Remove DTK screen when you keep the Configuration Manager console open while upgrading DSDP on the Configuration Manager Admin Console, Ignore the screen and click Next.
Enhancements
- Enhanced support for Microsoft System Center Configuration Manager (Configuration Manager) 2012 SP1
- Enhanced support for Windows 2012 Server deployment
- Enhanced support for New Dell Servers:
i. Dell PowerEdge M420
ii. Dell PowerEdge R520
iii. Dell PowerEdge R320
iv. Dell PowerEdge R420
v. Dell PowerEdge M520
vi. Dell PowerEdge T420
vii. Dell PowerEdge T320
viii. Dell PowerEdge M820
-Enhanced support for installing Dell Server Deployment Pack on a Configuration Manager where the SMS provider is installed on a system other than the site server system.
閱讀更多- Fixed the problems which were reported in earlier releases of DSDP and have been corrected in this release.
- Fixed Retain and Remove DTK screen when you keep the Configuration Manager console open while upgrading DSDP on the Configuration Manager Admin Console, Ignore the screen and click Next.
Enhancements
- Enhanced support for Microsoft System Center Configuration Manager (Configuration Manager) 2012 SP1
- Enhanced support for Windows 2012 Server deployment
- Enhanced support for New Dell Servers:
i. Dell PowerEdge M420
ii. Dell PowerEdge R520
iii. Dell PowerEdge R320
iv. Dell PowerEdge R420
v. Dell PowerEdge M520
vi. Dell PowerEdge T420
vii. Dell PowerEdge T320
viii. Dell PowerEdge M820
-Enhanced support for installing Dell Server Deployment Pack on a Configuration Manager where the SMS provider is installed on a system other than the site server system.
繁體中文版
2.1, A00
發佈日期
29 5月 2013
下載類型
應用程式
類別
系統管理
重要性
選用Dell Technologies 建議您檢閱此更新，以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態，或其提供的新功能不一定適用於您的環境。
可用的格式 檢視重要資訊
檔案格式： 將檔案直接解壓縮至本機磁碟
檔案名稱： Dell_Server_Deployment_Pack_v2.1_for_Configuration_Manager_A00.exe
檔案大小： 82.56 MB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
此檔案格式內含檔案封存，且該封存可能會解壓縮到硬碟上的目錄。接著就可以在該目錄中完成安裝。
為了確保下載的完整性，請驗證總和檢查值。
MD5：
27d61121ce7bc5afc6d3ceef4351b33d
SHA1：
808c6bdaf6dd7b1ff0d815abe3869a4649c3c71d
SHA-256：
366874c8fdb3fa538bb43195fde4a560bd58863a206830559da51467257e5b51
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
重要資訊
Important Notes
1. Dell Server Deployment Pack 2.1 includes DTK 4.2.0.1 in same package.
2. In iDRAC network settings, if the "Auto config Domain Name" is enabled for a target, then the task sequence "Static DNS Domain Name" used for configuring iDRAC will fail to set the configuration; however, the task sequence will not report any error, and the next task will continue to run.
3. To avoid this issue, before you run the task sequence, in iDRAC network settings, clear "Auto config Domain Name."
4. In the task sequence, it is recommended that you do not move or delete these Custom Action steps - "Restart in WinPE", "SetRebootStep", "Reboot to PXE/USB", Second "Format and Partition" step, "Setup windows and ConfigMgr," and "Reset RebootStep".
5. On a client machine, a task will fail if the Dell Remote Access Controller "Virtual Flash" is set to "enabled".
6. To prevent this failure, ensure that the "Virtual Flash" is set to "disabled" when a task is executed on the client machine.
7. After an operating system is deployed, ensure that the installed mass-storage driver is same as that specified in the Task Sequence.
8. If you find any differences, update the driver manually.
9. In Array Builder, you cannot delete the logical drive under Non-RAID disks.
10. In Configuration Manager 2007, when Dell specific packages, drivers, and boot images are managed using Configuration Manager's "Manage Distribution Point Wizard," the confirmation page displays incomplete summary.
11. In the Task Sequence Editor Window, to modify the path under "Logs/Return Files" page for the Dell custom actions, click "APPLY" and "OK."
12. When DSDP is being uninstalled on Windows Server 2008 operating system, a message displays that a reboot is required to complete the setup. Ignore this message and click "OK" to complete the uninstallation.
13. There is no new version of "ConfigMgr Client Package" for DSDP 2.1.
1. Dell Server Deployment Pack 2.1 includes DTK 4.2.0.1 in same package.
2. In iDRAC network settings, if the "Auto config Domain Name" is enabled for a target, then the task sequence "Static DNS Domain Name" used for configuring iDRAC will fail to set the configuration; however, the task sequence will not report any error, and the next task will continue to run.
3. To avoid this issue, before you run the task sequence, in iDRAC network settings, clear "Auto config Domain Name."
4. In the task sequence, it is recommended that you do not move or delete these Custom Action steps - "Restart in WinPE", "SetRebootStep", "Reboot to PXE/USB", Second "Format and Partition" step, "Setup windows and ConfigMgr," and "Reset RebootStep".
5. On a client machine, a task will fail if the Dell Remote Access Controller "Virtual Flash" is set to "enabled".
6. To prevent this failure, ensure that the "Virtual Flash" is set to "disabled" when a task is executed on the client machine.
7. After an operating system is deployed, ensure that the installed mass-storage driver is same as that specified in the Task Sequence.
8. If you find any differences, update the driver manually.
9. In Array Builder, you cannot delete the logical drive under Non-RAID disks.
10. In Configuration Manager 2007, when Dell specific packages, drivers, and boot images are managed using Configuration Manager's "Manage Distribution Point Wizard," the confirmation page displays incomplete summary.
11. In the Task Sequence Editor Window, to modify the path under "Logs/Return Files" page for the Dell custom actions, click "APPLY" and "OK."
12. When DSDP is being uninstalled on Windows Server 2008 operating system, a message displays that a reboot is required to complete the setup. Ignore this message and click "OK" to complete the uninstallation.
13. There is no new version of "ConfigMgr Client Package" for DSDP 2.1.
支援的作業系統
Windows Server 2008 x64
Windows Server 2012
Windows Server 2008 x86
Windows Server 2008 R2
安裝指示
Hard Drive Installation (File Extractions Only) Instructions
Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Follow the remaining prompts to perform the update.
Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file.
2. Follow the remaining prompts to perform the update.