Dell Tertiary IDE Channel Controller , v. 1.00.2002.0701, A00
已自動安裝 此檔案會在最近更新時自動安裝。如果您遇到任何問題，可以手動下載並重新安裝。此頁面的內容可能經過電腦自動翻譯。若要提供意見回饋，請填寫頁面底部的表單。
Required driver for Tertiary IDE Channel under Windows 2000
建議
請以系統管理員身分登入 Windows，以使用自動掃描。如果您已經以系統管理員身分登入並看到此訊息，請重新開機。 您的系統會由 IT 管理員管理，且功能可能會受到限制。
尋找更多更新。使用 SupportAssist 為您的裝置尋找所有最新的驅動程式更新。
修復及強化
This is a new release.
閱讀更多繁體中文版
1.00.2002.0701, A00
發佈日期
30 8月 2002
下載類型
驅動程式
類別
IDE/EIDE
重要性
選用Dell Technologies 建議您檢閱此更新，以判斷其是否適用於您的系統。此更新包含的變更僅會影響特定組態，或其提供的新功能不一定適用於您的環境。
可用的格式
檔案格式： 將檔案直接解壓縮至本機磁碟
檔案名稱： dell3idea00.exe
檔案大小： 130.71 KB
此為大型檔案。視您的連線速度而定，下載可能需要一些時間。
格式說明:
當您開始下載，即表示您接受 Dell 軟體授權協定 (英文版) 的條款。
支援的作業系統
Windows 2000
安裝指示
Default Instructions for dell3idea00.exe:
Installation
1. Download the file to a directory on your hard drive. The file
downloaded is self extracting.
2. Execute this file to extract the files compressed within it. These
files can be extracted to a diskette or to a
directory on your hard drive. Remember this location.
3. Log on as an Administrator (if not already). Windows 2000 OS starts;
displays a message that new hardware has been detected, and starts
the 'Found New Hardware Wizard'.
4. Click 'cancel'.
5. After Windows 2000 server installation is completed, install Service
pack 2 (SP2). Documentation may be supplied with the OS, or may be
downloaded from Microsoft or DELL website.
6. After the installation is complete, Windows 2000 restarts, and 'Found
New Hardware Wizard' appears.
7. Click 'cancel'.
8. Browse to the location the files were extracted to in step 2 above,
select the "Force.bat" file, and click 'open'.
9. When and if the Microsoft Digital Signature dialog boxes for the
ServerWorks PCI IDE controller or ServerWorks Primary/Secondary IDE
controller or DELL tertiary IDE controller appear, click Yes to continue.
10. The driver installation will be completed, and you will be prompted
to reboot the system. Click Yes, and reboot the system.
11. Enter the BIOS setup, and ensure that the third channel master and
slave (if needed) devices have been turned on or are in Auto mode. This
will enable the tertiary IDE drive channel.
12. In the BIOS setup, make sure that maximum UDMA mode is set to ATA-
100. This applies to the primary channel hard disk drives, and secondary
channel devices (CDROM and Tape Back Up unit)).
13. You may recheck the 'Device Manager'. The yellow bang against the
RAID controller in 'other devices' should not appear. Expand the IDE
devices sections. DELL tertiary IDE channel and DELL tertiary IDE
controller will be listed.
14. This completes the installation of the driver, and your system is
ready to access and fully utilize the hard disk drives connected to the
third IDE channel.
Installation
1. Download the file to a directory on your hard drive. The file
downloaded is self extracting.
2. Execute this file to extract the files compressed within it. These
files can be extracted to a diskette or to a
directory on your hard drive. Remember this location.
3. Log on as an Administrator (if not already). Windows 2000 OS starts;
displays a message that new hardware has been detected, and starts
the 'Found New Hardware Wizard'.
4. Click 'cancel'.
5. After Windows 2000 server installation is completed, install Service
pack 2 (SP2). Documentation may be supplied with the OS, or may be
downloaded from Microsoft or DELL website.
6. After the installation is complete, Windows 2000 restarts, and 'Found
New Hardware Wizard' appears.
7. Click 'cancel'.
8. Browse to the location the files were extracted to in step 2 above,
select the "Force.bat" file, and click 'open'.
9. When and if the Microsoft Digital Signature dialog boxes for the
ServerWorks PCI IDE controller or ServerWorks Primary/Secondary IDE
controller or DELL tertiary IDE controller appear, click Yes to continue.
10. The driver installation will be completed, and you will be prompted
to reboot the system. Click Yes, and reboot the system.
11. Enter the BIOS setup, and ensure that the third channel master and
slave (if needed) devices have been turned on or are in Auto mode. This
will enable the tertiary IDE drive channel.
12. In the BIOS setup, make sure that maximum UDMA mode is set to ATA-
100. This applies to the primary channel hard disk drives, and secondary
channel devices (CDROM and Tape Back Up unit)).
13. You may recheck the 'Device Manager'. The yellow bang against the
RAID controller in 'other devices' should not appear. Expand the IDE
devices sections. DELL tertiary IDE channel and DELL tertiary IDE
controller will be listed.
14. This completes the installation of the driver, and your system is
ready to access and fully utilize the hard disk drives connected to the
third IDE channel.