No apague la computadora ni la desconecte de la fuente de alimentación mientras se actualiza el BIOS, ya que podría dañarse la computadora. Durante la actualización, la computadora se reiniciará y es posible que vea brevemente una pantalla negra.
Antes de la actualización, lea las instrucciones de instalación y la información importante que se indica a continuación.
Dell Optiplex3010 System BIOS A06
Reinicio requerido INSTALADO AUTOMÁTICAMENTE Este archivo se instaló automáticamente como parte de una actualización reciente. Si experimenta algún problema, puede descargarlo y reinstalarlo manualmente.Es posible que el contenido de esta página se traduzca automáticamente. Para proporcionar comentarios, complete el formulario en la parte inferior de la página.
Dell OptiPlex3010 System BIOS A06
Recomendado
Encuentre la mejor descarga para su sistema
Ingrese los detalles del producto para ver la información más reciente del controlador para el sistemaBuscar soporte
Ingrese su modelo o etiqueta de servicio de Dell
¿Desea buscar su producto? Ingrese un identificador de producto. Mostrarme cómo
Este controlador no es compatible
Este controlador no se corresponde con el producto seleccionado. Elija otro producto para volver a ingresar los detalles del producto para este controlador o visite la página Soporte de productos para ver todos los controladores de un producto diferente.
Inicie sesión en Windows como administrador para utilizar el escaneo automático. Si ya inició sesión como administrador y ve este mensaje, reinicie el sistema. El administrador de TI administra el sistema y es posible que las funciones sean limitadas.
Encuentre más actualizaciones. Utilice SupportAssist para encontrar todas las actualizaciones de controladores más recientes para su dispositivo.
Correcciones y mejoras
WARNING: If the Dell Data Protection | Encryption Full Volume Encryption is deployed in the current system, Do Not Update BIOS to this BIOS release.
This BIOS update will cause systems deployed with DDPE FVE encryption to become unusable. Back flashing the BIOS to previous version and DDPE recovery steps will be required to recover data.
1.Fix Onboard HDMI audio no function if disable CSM in BIOS.
2.Update CPU ucode.
3.Active "Enable USB Wake Support".
4.Show NIC device name rather than "Onboard NIC" in UEFI mode.
5.Fix: The SUT can't boot to the ATA mode UEFI OS with HDD password setting.
Más informaciónThis BIOS update will cause systems deployed with DDPE FVE encryption to become unusable. Back flashing the BIOS to previous version and DDPE recovery steps will be required to recover data.
1.Fix Onboard HDMI audio no function if disable CSM in BIOS.
2.Update CPU ucode.
3.Active "Enable USB Wake Support".
4.Show NIC device name rather than "Onboard NIC" in UEFI mode.
5.Fix: The SUT can't boot to the ATA mode UEFI OS with HDD password setting.
Versión
A06, A06
Fecha de publicación
27 oct 2012
Tipo de descarga
BIOS del sistema
Categoría
BIOS
Importancia
RecomendadoDell Technologies recomienda aplicar esta actualización durante su próximo ciclo de actualizaciones programadas. La actualización contiene cambios para mantener el estado general del sistema. Garantiza que el software del sistema permanezca actualizado y compatible con otros módulos del sistema (firmware, BIOS, controladores y software) y puede incluir otras funciones nuevas.
Formatos disponibles Ver información importante
Formato de archivo: Flash BIOS executable
File Name: O3010A06.exe
Tamaño del archivo: 4.45 MB
Este es un archivo grande. La descarga puede tardar, dependiendo de la velocidad de conexión.
Descripción del formato:
Este formato de archivo consiste en un archivo ejecutable de BIOS. Para actualizar su sistema, descargue el archivo y guárdelo en su escritorio o disco duro, luego ejecute el archivo ejecutable. Para actualizar el BIOS, su sistema debe tener alimentación de CA y un nivel de carga de la batería de al menos 10%.
Para garantizar la integridad de su descarga, verifique el valor de la suma de comprobación.
MD5:
9b3f2e2e6e180ea577d48be5a4b03f08
SHA1:
b8ad9ee64aec14a2cf8980dd200d9c489d4c460a
SHA-256:
2cd810291afc20c44187a4745874c06f2b25eb3dc591008534f856f9430014f6
Al realizar la descarga, acepta los términos del Contrato de licencia de software de Dell. (en ingles)
Información importante
Upgrading and Downgrading between Currently Released BIOS Images (Pre-Win8 Released BIOS) and Win8 Feature Enhanced BIOS Images (Win8 Released BIOS)
Upgrading:
The new Win8 Released BIOS contains new features and behavior, but the upgrade process for the end user is still unchanged. Simply run the EXE application normally and the BIOS will handle incorporating the new features and logic with your current settings. After the upgrade, you will immediately see that one of the visible changes is to the logo screen during boot, which only displays the logo at a larger size with no other information or text.
Downgrading:
Once a machine has a Win8 Released BIOS running on it, downgrading to a Pre-Win8 Released BIOS requires removing some unique functionality and security enhancements that are only present in a Win8 Released BIOS. This downgrade process described here is specific to Win8 Released BIOS to Pre-Win8 Released BIOS transitions ONLY, and does not affect the normal rules/operations for downgrades of Pre-Win8 Released BIOS to an older Pre-Win8 Released BIOS, or Win8 Released BIOS to an older Win8 Released BIOS.
To install a Pre-Win8 Released BIOS on a machine running a Win8 Released BIOS, you will still use the same EXE application released for the BIOS version you wish to go to. When in Windows or DOS, your interaction with the application will be the same, but upon the machine restarting in order to do the update you will be prompted to accept the actions required in order to downgrade the machine and then prompted enter your admin password (if set). These prompts can not be accepted remotely and must be accepted by using an attached or built-in keyboard.
Due to compatibility of features, and ensuring platform stability, the only way to downgrade is to reset all the settings in the machine to a default factory state as if it had been shipped with a Pre-Win8 Released BIOS; specifically including defaulting the boot mode to Legacy (not UEFI), removing all passwords, and defaulting all user selectable settings. The following is retained on the machine (all other settings are reset): Windows Keys (if present), Service Tag, Asset Tag, Ownership Tag, Manufacturing Date, Ownership Date, and Express Service Code.
Downgrading is blocked if either Secure Boot is on or if Computrace has been activated. Due to security rules and protecting our machines from malicious attacks, if a user wishes to downgrade he/she must first ensure both of these are disabled or off. (Machines that are shipped out of the factory with Win8 Operating System are required to have Secure Boot initially on.)
After running the application, accepting the downgrading conditions prompts after restart, and the BIOS downgrading process is finished, the platform will be operating with the Pre-Win8 Released BIOS you desired. You may then go to the Firmware Setup to change settings and configure the machine as needed.
Quickly Identifying if You Have a Win8 Released BIOS Installed:
To quickly tell if a machine has a Win8 Released BIOS on it, check if the boot screen does not display the model name and BIOS version under the logo. This information, model name and BIOS version, are now found in the F12 menu on a Win8 BIOS.)
Upgrading:
The new Win8 Released BIOS contains new features and behavior, but the upgrade process for the end user is still unchanged. Simply run the EXE application normally and the BIOS will handle incorporating the new features and logic with your current settings. After the upgrade, you will immediately see that one of the visible changes is to the logo screen during boot, which only displays the logo at a larger size with no other information or text.
Downgrading:
Once a machine has a Win8 Released BIOS running on it, downgrading to a Pre-Win8 Released BIOS requires removing some unique functionality and security enhancements that are only present in a Win8 Released BIOS. This downgrade process described here is specific to Win8 Released BIOS to Pre-Win8 Released BIOS transitions ONLY, and does not affect the normal rules/operations for downgrades of Pre-Win8 Released BIOS to an older Pre-Win8 Released BIOS, or Win8 Released BIOS to an older Win8 Released BIOS.
To install a Pre-Win8 Released BIOS on a machine running a Win8 Released BIOS, you will still use the same EXE application released for the BIOS version you wish to go to. When in Windows or DOS, your interaction with the application will be the same, but upon the machine restarting in order to do the update you will be prompted to accept the actions required in order to downgrade the machine and then prompted enter your admin password (if set). These prompts can not be accepted remotely and must be accepted by using an attached or built-in keyboard.
Due to compatibility of features, and ensuring platform stability, the only way to downgrade is to reset all the settings in the machine to a default factory state as if it had been shipped with a Pre-Win8 Released BIOS; specifically including defaulting the boot mode to Legacy (not UEFI), removing all passwords, and defaulting all user selectable settings. The following is retained on the machine (all other settings are reset): Windows Keys (if present), Service Tag, Asset Tag, Ownership Tag, Manufacturing Date, Ownership Date, and Express Service Code.
Downgrading is blocked if either Secure Boot is on or if Computrace has been activated. Due to security rules and protecting our machines from malicious attacks, if a user wishes to downgrade he/she must first ensure both of these are disabled or off. (Machines that are shipped out of the factory with Win8 Operating System are required to have Secure Boot initially on.)
After running the application, accepting the downgrading conditions prompts after restart, and the BIOS downgrading process is finished, the platform will be operating with the Pre-Win8 Released BIOS you desired. You may then go to the Firmware Setup to change settings and configure the machine as needed.
Quickly Identifying if You Have a Win8 Released BIOS Installed:
To quickly tell if a machine has a Win8 Released BIOS on it, check if the boot screen does not display the model name and BIOS version under the logo. This information, model name and BIOS version, are now found in the F12 menu on a Win8 BIOS.)
Se aplica a
Dell Optiplex 3010
Instrucciones de instalación
WARNING: If the Dell Data Protection | Encryption Full Volume Encryption is deployed in the current system, Do Not Update BIOS to this BIOS release.
This BIOS update will cause systems deployed with DDPE FVE encryption to become unusable. Back flashing the BIOS to previous version and DDPE recovery steps will be required to recover data.
Note: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you doesn't enable BitLocker on your system you can ignore it.
--------------------------------------------------------------------------------
Installation Instructions for the Universal (Windows/ DOS) format
1. Download file to Desktop
2. Use one of the methods below to flash the Bios.
Run the BIOS update utility from Windows environment
Run the BIOS update utility from DOS environment (Non-Windows users)
--------------------------------------------------------------------------------
Download file to Desktop
The file O3010A06.exe is using the Universal (Windows/ DOS) format and is designed to be directly executed from Windows environment.
1. Click Download now.The File Download window appears.
2. Click the Save button.The Save As window appears.
3. Select Desktop using the drop-down menu to the right of Save in.
4. Click the Save button.A progress meter moves as the download is completed.
5. If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
NOTE: Shut down all other applications prior to running the BIOS update utility. The update utility reboots your system in order to get the new BIOS loaded.
--------------------------------------------------------------------------------
Run the BIOS update utility from Windows environment
1. Double click the Icon on your desktop labeled O3010A06.exe.The Dell BIOS Flash window appears
2. Click the Continue button.The message Pressing OK will close all applications, shut down Windows, Flash the BIOS, then reboot. appears.
3. Click the OK button.The system will restart and the BIOS Flash will be completed.
Run the BIOS update utility from DOS environment (Non-Windows users)
NOTE: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
1. Copy the file O3010A06.exe to a bootable USB key.
2. Boot from the USB key to the DOS prompt.
3. Run the file by typing Y:\O3010A06.exe (where y is the drive letter where the executable is located).
--------------------------------------------------------------------------------
This BIOS update will cause systems deployed with DDPE FVE encryption to become unusable. Back flashing the BIOS to previous version and DDPE recovery steps will be required to recover data.
Note: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you doesn't enable BitLocker on your system you can ignore it.
--------------------------------------------------------------------------------
Installation Instructions for the Universal (Windows/ DOS) format
1. Download file to Desktop
2. Use one of the methods below to flash the Bios.
Run the BIOS update utility from Windows environment
Run the BIOS update utility from DOS environment (Non-Windows users)
--------------------------------------------------------------------------------
Download file to Desktop
The file O3010A06.exe is using the Universal (Windows/ DOS) format and is designed to be directly executed from Windows environment.
1. Click Download now.The File Download window appears.
2. Click the Save button.The Save As window appears.
3. Select Desktop using the drop-down menu to the right of Save in.
4. Click the Save button.A progress meter moves as the download is completed.
5. If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
NOTE: Shut down all other applications prior to running the BIOS update utility. The update utility reboots your system in order to get the new BIOS loaded.
--------------------------------------------------------------------------------
Run the BIOS update utility from Windows environment
1. Double click the Icon on your desktop labeled O3010A06.exe.The Dell BIOS Flash window appears
2. Click the Continue button.The message Pressing OK will close all applications, shut down Windows, Flash the BIOS, then reboot. appears.
3. Click the OK button.The system will restart and the BIOS Flash will be completed.
Run the BIOS update utility from DOS environment (Non-Windows users)
NOTE: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files.
1. Copy the file O3010A06.exe to a bootable USB key.
2. Boot from the USB key to the DOS prompt.
3. Run the file by typing Y:\O3010A06.exe (where y is the drive letter where the executable is located).
--------------------------------------------------------------------------------
¿Necesita ayuda con los problemas de BIOS?
Busque la solución en la Guía de uso y solución de problemas de BIOS de Dell.Ayuda y tutoriales para controladores
Para obtener más descargas, vaya a Controladores y descargas. Para obtener ayuda con el uso de la información en esta página, visite Tutoriales y ayuda sobre controladores.