American Megatrends (AMI) PERC 2/SC, PERC2/DC, v.6.35.2.32, A02

AUTO INSTALLED This file was automatically installed as part of a recent update. If you are experiencing any issues, you can manually download and reinstall.
Dell PowerEdge RAID Controller 2/DC and 2/SC Device Driver for Windows 2003.

Version 6.35.2.32
Recommended

Find the best download for your system

Please enter your product details to view the latest driver information for your system

Search support

Enter your Dell Service Tag or model

Want to look up your product? Enter a product identifier. Show me how

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

Find more updates. Use SupportAssist to find all the latest driver updates for your device.

Fixes & Enhancements

Fixes or Enhancements in this Release

Enhancements:
1) None

Fixes:
1) Minor change to Oemsetup.txt file.

2) Driver no longer filters out all other commands except SCSI READ and SCSI WRITE
Read More

Version

6.35.2.32, A02

Release date

15 Mar 2004

Download Type

Driver

Category

SCSI RAID

Importance

Optional
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Available formats

File Format: Update Package for MS Windows 32-Bit
File Name: RAID-DRVR-R65396.exe
File Size: 1.09 MB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
To ensure the integrity of your download, please verify the checksum value.
MD5:
174753AA1DFEBE31CF7CF990BA907E0D
SHA1:
Not available
SHA-256:
Not available

File Format: Extracts files directly to local disk
File Name: PERC2-W2K3-6.35-A02.exe
File Size: 124 KB
This is a large file. Depending on your connection speed, it may take some time to download.
Format Description:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
To ensure the integrity of your download, please verify the checksum value.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available

By downloading, you accept the terms of the Dell Software License Agreement.

Additional details

Show All | Hide All


Custom Instructions for PERC2-W2K3-6.35-A02.exe:

Dell PowerEdge RAID Controller 2/SC, 2/DC, 4/DC, 4/SC, 3/QC, 3/DC,
3/DCL, 3/SC, 4/DI, and CERC ATA100/4CH, Device Driver for
Windows Server 2003.

Version 6.35.2.32

Download

1. Click the "Download Now" link to download the file.
2. If the Export Compliance Disclaimer window appears, click the "I agree" link to accept the agreement.
3. When the File Download window appears, click "Save" to save the file to your hard drive.

Extract Files

1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package.
2. Specify the location to unzip the files – the instructions below assume you extract files to a formatted floppy disk.
3. Click on the unzip button to extract files.

Installation

Dell PowerEdge RAID Controller 4/DC, 4/SC, 3/QC, 3/DC, 3/DCL, 3/SC, 4/DI, and CERC ATA100/4CH, Device Driver for Windows Server 2003.

Version 6.35.2.32

Installing on a new driver on a Windows Server 2003 system


1) Boot the system using the Windows Server 2003 CD. As the message "Press F6 if you need to install a third party SCSI or RAID driver." appears, press F6 immediately.

2) Within a few minutes, a screen appears that asks for additional adapters in the system. Choose 'S'.

3) You are prompted for the driver diskette. Insert the PERC/CERC Windows Server 2003 driver diskette in the floppy drive and press Enter.

4) A list of drivers for PERC/CERC controllers appears. Select the right driver for your installed controller and press Enter to load the driver.

5) A statement is presented saying the driver that you provided is older/newer then the Windows driver.

Press 'S' to use the driver on the floppy.

6) Press Enter again to continue installation process as usual.


Adding the PERC/CERC Driver to an Existing Windows Server 2003.


1) Boot the system to Windows 2003. The Found New Hardware Wizard displays.

2) If you are installing the PERC 3/SC, PERC 4/DC, PERC 4/SC, PERC 4/DI or CERC ATA100/4CH, click on Next and skip to step 5. Otherwise, click Cancel on all the new devices.

3) Restart the system from the shutdown menu.

4) The Found New Hardware Wizard displays again when the system boots to Windows Server 2003. Click on Next.

5) Select Search for a suitable driver and click "Next" to continue.

6) Select Floppy disk drive, insert the PERC/CERC Windows 2003 driver diskette created above and click Next to continue.

7) Continue to click on Next and finish the installation.

8) The Found New Hardware Wizard screen appears one time for each PERC 3/SC, PERC 4/SC, PERC 4/DC controller, three times for each PERC 3/DC or PERC 3/DCL controller and four times for each PERC 3/QC. Repeat steps 5 - 7 for each time the wizard displays to complete installation of the card.

9) To confirm driver installation, right click on My Computer and select Manage. Click on Device Manager, then click on SCSI and RAID controllers to see the newly added PERC 3 controller(s) in the list.

After finishing the driver update, YOU MUST REBOOT YOUR SERVER.


Updating the PERC/CERC Driver on an Existing Windows Server 2003.


If your server is already running Windows Server 2003, use the following steps to update the PERC Windows Server 2003 driver.

Note: If your driver supports multiple RAID controllers, make sure to upgrade all the RAID controllers in your system that your driver supports.

1) Insert the PERC/CERC Windows Server 2003 driver diskette.

2) Position the mouse pointer to the my computer icon in the Start menu and right click and select Manage.

3) Position the mouse pointer on Device Manager and click the left mouse button.

4) Position the mouse pointer on SCSI and RAID controllers and double click.

5) Select the PERC controller and double click.

6) Select the Driver tab.

7) Select Update Driver.

The Upgrade Device Driver Wizard disp

Drivers help and tutorials