Seagate SAS6 ST3300657SS, ST3450857SS and ST3600057SS firmware version ES65

AUTOMATIKUSAN TELEPÍTETT Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
This release contains firmware version ES65 for Seagate SAS6 (15k rpm 3.5 SAS) 300GB, 450GB and 600GB Hard Drives. Vendor model numbers ST3300657SS, ST3450857SS and ST3600057SS.
Ajánlott

Keresse meg a legjobb letöltést a rendszeréhez

Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.

Keresés a támogatási adatok között

Adja meg Dell-szervizcímkéjét vagy -modelljét

Szeretné kikeresni termékét? Adjon meg egy termékazonosítót. Mutasd meg, hogyan!

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.

Fixes & Enhancements

Fixes / Enhancements:
Improved error handling
Improved Read Streaming Performance
Improved Sequential Write Performance
Resolved rare issue that could cause hang when using dual ports
Resolved a performance issue with sequential workloads with low queue depth
Resolved issue that could cause drive detection issues when attached to expander
Resolved issue create new array when BGI takes longer to run on drive with prior data
További információ

Verziószám

ES65, A06

Kibocsátás dátuma

07 dec. 2011

Letöltés típusa

Firmware

Kategória

SAS-meghajtó

Fontosság

Optional
Dell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Elérhető formátumok View Important Information

Fájlformátum: Frissítőcsomag MS Windows rendszerhez (32 bites)
Fájlnév: FRMW_WIN_R310809.EXE
Fájlméret: 5.68 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
8C4A46F37EDF4A50463D5102605D4B7D
SHA1:
Not available
SHA-256:
Not available

Fájlformátum: A GnuPG file which contains a cryptographic signature
Fájlnév: FRMW_LX_R310809.BIN.sign
Fájlméret: 194 Bytes
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
0326B2FDCDAAFB915539A45D0C13C465
SHA1:
Not available
SHA-256:
Not available

Fájlformátum: Update Package for Red Hat Linux
Fájlnév: FRMW_LX_R310809.BIN
Fájlméret: 4.97 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
4E19528CB833042D0476EF9421C14BCA
SHA1:
Not available
SHA-256:
Not available

A letöltéssel Ön elfogadja a Dell szoftverlicenc-szerződés feltételeit.

További részletek

Show All | Az összes elrejtése
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not Optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.

This update will run on drives remaining in a RAID set that is in a Offline state.

There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
Seagate (Cheetah 15K.7) SAS 600GB 15K RPM
Seagate Cheetah 15K.7 SAS 300GB 15K RPM
Seagate Cheetah 15K.7 SAS 450GB 15K RPM
Dell Update Package Instructions:

Download

1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.

5. Follow the remaining prompts to perform the update.

Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok