Dell SAS Hard Drive Firmware Utility, SATA Hard Drive Firmware Utility, v.SAS_SATA, A11
AUTOMATIKUSAN TELEPÍTETTEz a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
This is a general maintenance release for SAS and SATA drives. It is a re-release of the previous version with enhanced installation instructions. Please see Fixes and Enhancements for information regarding an Urgent Seagate SATA release
Ajánlott
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.
Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót.Mutasd meg, hogyan!
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet.A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
This is a general maintenance release for SAS and SATA drives. It is a re-release of the previous version with enhanced installation instructions.
All former firmware releases for all supported SAS and SATA hard drives have been compiled onto one release. Review the text file for information about fixes supported on this release
The release information in this section is specific to new firmware that has never before been released to the web. New releases added to this utility.
Releases are listed in order of Criticality:
* Recommended Releases *
============================================ 1.) Seagtate SAS 15k.5 3.5", version S52A ============================================
* Offline Download Firmware Version S52A *
Fixes and Enhancements ====================== New firmware for the Seagate SAS 3.5", offline download version, is available for drive models ST3300655SS, ST3146855SS and ST373455SS that will help improve stability and overall reliability of these drives. During the next scheduled maintenance window, please update the drive firmware to the latest level, version S517.
Improved handled during drive offline condition Improved drive error recovery for ECC correctable errors Resolved race condition during drive spin up Resolved retry errors during format with certify Fixed condition that caused LED to remain lit when normally would flash Enhanced DST Error recovery / handling Adds the DELL(tm) signature
Dell Part #DescriptionCriticality ---------------------------------
====================== 2.) Seagate 15K6 SAS 3.5" ======================
* Firmware Version HS0F *
Seagate 15k6 SAS, 3.5" version HS0F for drive models ST3450856SS, ST3300656SS and ST3146356SS.
Fixes and Enhancements ====================== Performance Enhancements Performance improvements to 4KB random reads
Dell Part #DescriptionCriticality --------------------------------- XX518HD,146G,SAS,DU,15K,3.5,SGT,HURRecommmended FM501HD,450G,SAS,DU,15K,3.5,SGT,HURRecommended YP778HD,300G,SAS,DU,15K,3.5,SGT,HURRecommended
====================== 3.) Seagate 10k SAS 2.5" ======================
* Firmware Version S22C *
Seagate 10k SAS 2.5", version S22C for drive models ST9146802SS (146GB) and ST973402SS (73GB).
Fixes and Enhancements ====================== Improved handled during drive offline condition Improved drive error recovery for ECC correctable errors Resolved race condition during drive spin up Resolved retry errors during format with certify Fixed condition that caused LED to remain lit when normally would flash Enhanced DST Error recovery / handling Adds the DELL(tm) signature
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
"This release is intended for use on drives attached to SAS/ PERC controllers and MD1000 Enclosures. To update drives attached to MD3000 and MD3000i enclosures, use R227532"
Please note: Only Dell Branded SAS/SCSI and PERC controllers are supported. Embedded SATA controllers are not supported.
On drives attached to PERC5/PERC6 controllers, the first drive to be updated requires a 5 minute delay before firmware flash to begin. Do not power cycle or reboot your system while the update is in progress.
1. Click the "Download Now" link to download the file. 2. When the File Download window appears, click "Save" to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.
Detailed Instructions
1) Click Download now. The File Download window appears.
2) Click the Save button. The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button. A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file.
Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok