Dell PowerEdge Products C6220 & C6220 II RSTe Host RAID in support of Windows Server 2008 English 64 bit v3.1.0.1085
Újraindítás szükségesAUTOMATIKUSAN TELEPÍTETTEz a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Dell PowerEdge Products C6220 RSTe Host RAID support OS Windows Server 2008 English 64 bit
Ajánlott
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.
Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót.Mutasd meg, hogyan!
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet.A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
1.Provides workaround for WD 6G SAS driver issue 2.Resolves GUI/driver installation errors if no drivers attached to AHCI controller 3.S3/S4 support enabled
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, then double-click it to unzip the set of files. Follow the instructions to complete the installation.
1. SAS features are enabled on SATA/SAS Capable Controller if appropriate Intel(R) RAID C600 Upgrade Key is present in the system. 2. RAID 5 is no longer supported by SATA/SAS Capable Controller when SAS features are enabled. 3. Boot through expander is not supported in legacy mode. 4. SGPIO on AHCI Capable SATA Controller is disabled by default in order to support hibernation. Fix will be in a future release. The registry key [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorA\Parameters\Device]LED_Supported"=dword:00000001" can be added but will disable hibernation. 5. Windows 2003 x86 installation is not supported. Fix will be in a future release. 6. The disk fault LEDs will not work when using the expander. Fix will be in a future release. 7. MPIO Load Balancing in RAID Mode is unsupported 8. A SAS Wide port spanning SCU0 and SCU1 is not supported. 9. Plugging both SCU into the same expander is not supported
1. In windows , click and then select 2. Select System and Security 3. Select Device Manager 4. In other devices , will find the SAS Controller with a yellow warning symbol 5. Right click the SAS Controller and select Update Driver Software 6. Select Browse my computer for driver software 7. Select Browse to navigate where the driver resides 8. Navigate to where the driver is located and select the INF from the driver folder with that has the same OS version as the system . Click Install when the system promps a Windows Security warning . 9. After the driver software is installed successfully , click Close . 10. With the installation of the new driver , the system will prompt a warning to restart the computer , please select to reboot the system .
Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok