Dell Data Protection | Access -- Application Package
Újraindítás szükséges AUTOMATIKUSAN TELEPÍTETT Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
This package provides the Dell Data Protection | Access -- Application Package and is supported on Latitude, Precision and OptiPlex models that are running the following Windows Operating Systems: XP, Vista (32-bit) and Windows 7 (32-bit).
Ajánlott
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót. Mutasd meg, hogyan!
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet. A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
Initial Release
További információVerziószám
2.0.00000.154, A00
Kibocsátás dátuma
14 nov. 2012
Letöltés típusa
Alkalmazások
Kategória
Dell Data Security
Fontosság
RecommendedA Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Elérhető formátumok View Important Information
Fájlformátum: ZipPack External
Fájlnév: DELL_DATA-PROTECTION---ACCES_A00_R288884.exe
Fájlméret: 85.64 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
55dcc728bb661f01f0826ab8674c4060
SHA1:
f32ef929f14195da0aafc41316aa27ae27c5e0ea
SHA-256:
2210376e12a0e9cedec9222c22dbc8d99c001e1375ca300ee799b58d794e9e8d
A letöltéssel Ön elfogadja a Dell szoftverlicenc-szerződés feltételeit.
Fontos tudnivalók
In order to install the Dell Data Protection | Access solution, you must install the Dell Data Protection | Access Pre-Requisite package, the Dell Data Protection | Access driver package and the Dell Data Protection | Access Middleware package before installing the Dell Data Protection | Application package.
For Systems configured with Dell ControlPoint Security Manager, please follow the instructions below to ensure proper and complete upgrade to Dell Data Protection | Access.
For Systems configured with Dell ControlPoint Security Manager, please follow the instructions below to ensure proper and complete upgrade to Dell Data Protection | Access.
NOTE: Installation order is very important use the following procedure, including reboots, or the software will not function properly:
1.Backup any previously implemented security settings (if applicable)
a.Backup TPM keys and credentials (on Dell ControlVault enabled systems).
b.If you have any documents included in the Document Vault or Document Manager, remove these files. Dell Data Protection | Access does not contain this function and any data not removed from this feature will be lost.
c.Backup any user Private Information Manager account data.
2.Dell ControlPoint Security Manager must be uninstalled (if applicable)
a)Uninstall Dell ControlPoint Security Manager from Add/Remove Programs.
b)Reboot.
3.Dell Security Device Driver Pack must be uninstalled (if applicable)
a)Uninstall Dell Security Device Driver Pack from Add/remove programs.
b)Reboot.
4.Download the Dell Data Protection |Access software packages (Pre-Requisite(XP and Vista OS only), Driver, Middleware, and Application)
5.Install downloaded software in the order listed below
a)Install Dell Data Protection | Access Pre-Requisite package (XP and Vista OS only)
b)Reboot if requested.
c)Install Dell Data Protection | Access Driver package.
d)Install Dell Data Protection | Access Middleware package.
e)Reboot.
f)Install Dell Data Protection | Access Application package.
g)Reboot.
6.Clear any previously stored security settings implemented such as TPM enablement, fingerprints enrolled, BIOS passwords, preboot credentials, etc. (if applicable)
a)Launch Dell Data Protection |Access application.
b)Navigate to the advanced screen.
c)Click on Reset System and provide all implemented passwords and follow instructions appropriately.
7.Clear any previous non-ControlVault fingerprint enrollments (for Latitude E54x0 and E55x0 only systems)
a)Navigate to \Program Files\Dell\Dell Data Protection\Access\Drivers\Authentec AES2810 Fingerprint Reader\Tools folder and run AESReset.exe and follow instructions.
8.Clear any previous external fingerprint enrollments (if applicable)
a)For external fingerprint readers (Dell branded Fingerprint reader, Eikon 2 and Eikon to go readers), navigate to \Program Files\Dell\Dell Data Protection\Access\Advanced\Wave\Preboot Manager and execute the deleteusers.exe utility.
9.Restore your archived security settings backed up in Step 1 (if applicable)
Note: this will only restore archived TPM keys from USC 1.4 or DDPA 2.0 usage or preboot data which is enrolled within the Dell ControlVault.
a)Open Dell Access, navigate to the advanced screen, click on Credential Archive and Restore.
b)Click on Restore your security credentials.
c)Follow the wizard until completion.
10.Launch Dell Data Protection |Access application
a)Application will install into the Start Menu under Programs\Dell\Dell Data Protection\AccessNote: No desktop or task tray icons will be placed onto the system by default.
b)Upon first launch of Dell Data Protection | Access, the System Access Wizard will prompt you. This wizard will guide you through the system setup process. If t
For Systems configured with Dell ControlPoint Security Manager, please follow the instructions below to ensure proper and complete upgrade to Dell Data Protection | Access.
For Systems configured with Dell ControlPoint Security Manager, please follow the instructions below to ensure proper and complete upgrade to Dell Data Protection | Access.
NOTE: Installation order is very important use the following procedure, including reboots, or the software will not function properly:
1.Backup any previously implemented security settings (if applicable)
a.Backup TPM keys and credentials (on Dell ControlVault enabled systems).
b.If you have any documents included in the Document Vault or Document Manager, remove these files. Dell Data Protection | Access does not contain this function and any data not removed from this feature will be lost.
c.Backup any user Private Information Manager account data.
2.Dell ControlPoint Security Manager must be uninstalled (if applicable)
a)Uninstall Dell ControlPoint Security Manager from Add/Remove Programs.
b)Reboot.
3.Dell Security Device Driver Pack must be uninstalled (if applicable)
a)Uninstall Dell Security Device Driver Pack from Add/remove programs.
b)Reboot.
4.Download the Dell Data Protection |Access software packages (Pre-Requisite(XP and Vista OS only), Driver, Middleware, and Application)
5.Install downloaded software in the order listed below
a)Install Dell Data Protection | Access Pre-Requisite package (XP and Vista OS only)
b)Reboot if requested.
c)Install Dell Data Protection | Access Driver package.
d)Install Dell Data Protection | Access Middleware package.
e)Reboot.
f)Install Dell Data Protection | Access Application package.
g)Reboot.
6.Clear any previously stored security settings implemented such as TPM enablement, fingerprints enrolled, BIOS passwords, preboot credentials, etc. (if applicable)
a)Launch Dell Data Protection |Access application.
b)Navigate to the advanced screen.
c)Click on Reset System and provide all implemented passwords and follow instructions appropriately.
7.Clear any previous non-ControlVault fingerprint enrollments (for Latitude E54x0 and E55x0 only systems)
a)Navigate to \Program Files\Dell\Dell Data Protection\Access\Drivers\Authentec AES2810 Fingerprint Reader\Tools folder and run AESReset.exe and follow instructions.
8.Clear any previous external fingerprint enrollments (if applicable)
a)For external fingerprint readers (Dell branded Fingerprint reader, Eikon 2 and Eikon to go readers), navigate to \Program Files\Dell\Dell Data Protection\Access\Advanced\Wave\Preboot Manager and execute the deleteusers.exe utility.
9.Restore your archived security settings backed up in Step 1 (if applicable)
Note: this will only restore archived TPM keys from USC 1.4 or DDPA 2.0 usage or preboot data which is enrolled within the Dell ControlVault.
a)Open Dell Access, navigate to the advanced screen, click on Credential Archive and Restore.
b)Click on Restore your security credentials.
c)Follow the wizard until completion.
10.Launch Dell Data Protection |Access application
a)Application will install into the Start Menu under Programs\Dell\Dell Data Protection\AccessNote: No desktop or task tray icons will be placed onto the system by default.
b)Upon first launch of Dell Data Protection | Access, the System Access Wizard will prompt you. This wizard will guide you through the system setup process. If t
Támogatott operációs rendszerek
Windows 7 (32 bites)
Windows Vista (32 bites)
Windows XP
A következőre vonatkozik:
�
Authentec AES2810 Windows Biometric Framework
Dell Data Protection | Access
Dell Data Protection | Access - Pre-Requisite Package
Dell Data Protection | Access -- Application Package
Dell Data Protection | Access -- Driver Package
Dell Data Protection | Access -- Middleware Package
Telepítési utasítások
Hard Drive Installation (via WinZip) with Setup.exe File
Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install
1.Double-click the new icon on the desktop
2.The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\6Y74K". (Where '6Y74K' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\6Y74K" (Where '6Y74K' isthe name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.
Download
1.Click Download File, to download the file.
2. When the File Download window appears, click Save or Save this program to disk and click OK. The Save In: window appears.
3. From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install
1.Double-click the new icon on the desktop
2.The Self-Extracting window appears and prompts you to extract or unzip to "C:\DELL\DRIVERS\6Y74K". (Where '6Y74K' is the name of the file to be downloaded). Write down this path so the executable (I.e.Setup.exe) file can be found later.
3. The Self-Extractor window appears.
4. Click OK.
5. After completing the file extraction, if the Self-Extractor window is still open, close it.
6. Click Start button and then click Run.
7. Type "C:\DELL\DRIVERS\6Y74K" (Where '6Y74K' isthe name of the file) in the Open textbox and then click OK.
8. Follow the on-screen installation instructions.
Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok
További letöltésekért lépjen a következő oldalra: Illesztőprogramok és letöltések. Az ezen az oldalon található információk használatával kapcsolatban látogasson el az illesztőprogramokkal kapcsolatos súgó és oktatóanyagok oldalára.