Dell,FW,TL2000-4000,A16-B.20

AUTOMATIKUSAN TELEPÍTETT Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
TL2000 and TL4000 library and drive firmware and ITDT-DCR.
Library Firmware = B.20
LTO5 Drive Firmware = BBNF
LTO4HHv2 Drive Firmware = BBNF
LTO4FH Drive Firmware = BBH4
LTO4HHv1 Drive Firmware = BBH5
LTO3HHv2 Drive Firmware = BBNF
LTO3FH Drive Firmware = 93GP
LTO3HHv1 Drive Firmware =93GQ
Ajánlott

Keresse meg a legjobb letöltést a rendszeréhez

Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.

Keresés a támogatási adatok között

Adja meg Dell-szervizcímkéjét vagy -modelljét

Szeretné kikeresni termékét? Adjon meg egy termékazonosítót. Mutasd meg, hogyan!

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.

Fixes & Enhancements

Library improvements include:
- Fix for SNMP info for community names longer than 13 characters
- Proper library\drive response for a read failure on encrypted media

Several drive improvements and enhancements:
Several drive fixes which include:
- Stuck tape prevention
- I/O error recovery
- Error Reporting
További információ

Verziószám

B.20, A16

Kibocsátás dátuma

10 ápr. 2012

Letöltés típusa

Firmware

Kategória

Automatizált szalagos megoldás

Fontosság

Kritikus
Dell Technologies highly recommends applying this important update as soon as possible. The update contains critical bug fixes and changes to improve functionality, reliability, and stability of your Dell system. It may also include security fixes and other feature enhancements.
Elérhető formátumok View Important Information

Fájlformátum: ZipPack External
Fájlnév: 7MX39_ZPE.exe
Fájlméret: 100.69 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
275e5663d369086cd8237090747a865e
SHA1:
24d7745bd2a5ab1aed3dff8b6b1834910b9ed850
SHA-256:
e76be8b4bd9b2744921018e6a260d1674584762a0da2aa712353266950130464

A letöltéssel Ön elfogadja a Dell szoftverlicenc-szerződés feltételeit.

További részletek

Show All | Az összes elrejtése
Dell PowerVault TL2000/TL4000 will change unique ID when the library firmware is upgraded from 5.80 or earlier to 6.60 or later. This change is a result of the IPv6 DOD implementation. As a result of the FIRMWARE upgrade the library will acquire a new IP address if set in DHCP mode; please ensure user has access to the library Operator Control Panel (OCP) in order to acquire the new DHCP address. This change will not affect libraries set for static IP addresses.
Dell PowerVault TL4000/2000 drive firmware release implemented Federal Information Processing Standards (FIPS), The LT04 and LTO5 drive firmware now contains a digital signature. Drive firmware signature is transparent to the user and backup application. The signature provides protection against firmware or device tampering; as a result a firmware upgrade to an unsigned firmware version is prohibited. If you require assistance, please contact Dell technical support.
Provides support for the new Library Controller Board (LCB)
See Dell PowerVault A07 Release Notes December'08 file for a full release details
To install ITDT, a suitable version of Java is required for both Windows and Linux.

***** LINUX INSTALLATIONS ONLY *****

The default install location for the current release of ITDT has changed in Linux based installations.

The previous destination was: /opt/dell/dvtd/jre Whereas the current default location is: /opt/dell/itdt_dcr/jre

The symbolic link creation example for ITDT in Section 2.1 of the readme file should be:

IBM JRE:
$ ln -sf /opt/IBMJava2-142/jre /opt/dell/itdt_dcr/jre Sun Microsystems JRE:
$ ln -sf /usr/java/j2re1.4.2_09 /opt/dell/itdt_dcr/jre
Novell SuSE Linux ES 11
Windows Server 2008 x64
Red Hat® Ent Linux 4
Red Hat® Ent Linux 4.5
Red Hat® Ent Linux 4.6
SuSE Linux ES 9
Suse Linux ES 9
Suse Linux ES 10
Linux
Red Hat® Enterprise Linux 4.5
Nem alkalmazható
Red Hat® Ent Linux 4.7
Red Hat® Ent Linux 5.2
Red Hat® Enterprise Linux 6
Red Hat® Ent Linux 5
Red Hat® Ent Linux 5.1
Novell SuSE Linux ES 10
Windows Server 2008 x86
Windows Server 2003
Windows 2000
Windows Server 2008 R2
Windows Server 2003 x64
Hard Drive Installation (via WinZip) with HTML Pop-Up Window

Download
1.Click Download Now, to download the file.
2.When the File Download window appears, click Save this program to
disk (Windows XP users, click Save) and click OK. The Save In: window
appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
name icon appears on your desktop.

Install
1.Double-click the new icon on the desktop
The Self-Extractor window appears.
2.Click OK or Continue.
The Self-Extracting Driver Installation window appears and prompts to
extract files to C:\DELL\DRIVERS
3.Leave all of the default settings and click Unzip or OK. If the
directory doesn't exist, you'll be prompted to create one. Click Yes. A
Self Extractor window appears and indicates C:\DELL\DRIVERS files were
extracted.
4.Click OK.
Follow the on-screen installation instructions in the window.

HTML Pop-Up With Install Now Button
1.The Dell Software Installation Documentation window appears.
2.Click the Install Now button. A File Download window appears.
3.Click Run this program from its current location and click OK.
The Security Warning window appears.
4.Click Yes. The InstallShield Wizard window appears.
5.Follow the on-screen instructions.

Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok