Seagate SAS ST9300653SS and ST9146853SS firmware version YS08.

AUTOMATIKUSAN TELEPÍTETT Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
This release contains firmware version YS08 for Seagate SAS (15K rpm 2.5 SAS) 146GB and 300GB Hard Drives. Dell. Vendor model numbers ST9300653SS and ST9146853SS.
Ajánlott

Keresse meg a legjobb letöltést a rendszeréhez

Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.

Keresés a támogatási adatok között

Adja meg Dell-szervizcímkéjét vagy -modelljét

Szeretné kikeresni termékét? Adjon meg egy termékazonosítót. Mutasd meg, hogyan!

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.

Fixes & Enhancements

New firmware is available for the Seagate SAS (15K rpm 2.5" SAS) 146GB and 300GB Hard Drives. Vendor model numbers ST9300653SS and ST9146853SS. During the next scheduled maintenance window, please update the drive firmware to the latest level, version YS08.

Fix:
1) Overall drive improvements that long term drive reliability
2) Improve drive error handling
3) Corrected issue that caused poor seek performance under high workloads with large temperature gradients
4) Corrected rare issue with error logging after stop command
5) Corrected a performance drop on random writes that occurred when running queue depth of 40 for extended period
6) Corrected issue that caused write performance drop when drive scan was occurring
További információ

Verziószám

YS08, A04

Kibocsátás dátuma

25 ápr. 2012

Letöltés típusa

Firmware

Kategória

SAS-meghajtó

Fontosság

Recommended
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Elérhető formátumok View Important Information

Fájlformátum: Frissítőcsomag MS Windows rendszerhez (32 bites)
Fájlnév: SAS-Drive_Firmware_C36T8_WN32_YS08_A04.EXE
Fájlméret: 5.9 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
8c34d118b23af75ae7e763b8152b4116
SHA1:
b4183fbf7971e4f4514ee5f2d63b0756df488089
SHA-256:
Not available

Fájlformátum: A GnuPG file which contains a cryptographic signature
Fájlnév: SAS-Drive_Firmware_C36T8_LN32_YS08_A04.BIN.sign
Fájlméret: 194 Bytes
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
The GnuPG signature for Red Hat Linux Update Package can be used to authenticate Dell's identity in the correlated Red Hat Linux Update Package.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
3173be3a75bf4e483fb7ea7e3b5966ba
SHA1:
f3806979e24c9f6f9a348522fd0c78b10ff8968e
SHA-256:
Not available

Fájlformátum: Update Package for Red Hat Linux
Fájlnév: SAS-Drive_Firmware_C36T8_LN32_YS08_A04.BIN
Fájlméret: 3.98 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update.
Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
bdcf6f1a03edbe706d26b7a2e0397714
SHA1:
6a47e5e51b77f33f481f5bc9eb87cf889c1b6cbc
SHA-256:
Not available

A letöltéssel Ön elfogadja a Dell szoftverlicenc-szerződés feltételeit.

További részletek

Show All | Az összes elrejtése
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.

This update will run on drives remaining in a RAID set that is in a Offline state.

There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as - The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
Novell SuSE Linux ES 11
Windows Server 2008 x64
Red Hat® Ent Linux 4.5
Red Hat® Ent Linux 4.6
SuSE Linux ES 9
Suse Linux ES 9
Suse Linux ES 10
Red Hat® Enterprise Linux 4.5
Red Hat® Ent Linux 4.7
Red Hat® Ent Linux 5.2
Red Hat® Enterprise Linux 6
Red Hat® Ent Linux 5
Novell SuSE Linux ES 10
Windows Server 2008 x86
Windows Server 2003
Windows Server 2008 R2
Windows Server 2003 x64
Seagate Savvio 15K.3 146GB SAS 15K RPM
Seagate Savvio 15K.3 300GB SAS 15K RPM
Dell Update Package Instructions:

Download

1. Click the "Download Now" link to download the file.
2. When the File Download window appears, click "Save" to save the file to your hard drive.

Installation

1. Browse to the location where you downloaded the file and double-click the new file.
2. Read over the release information presented in the dialog window.
3. Download and install any prerequisites identified in the dialog window before proceeding.
4. Click the Install button.
5. Follow the remaining prompts to perform the update.



1) Click Download now.
The File Download window appears.

2) Click the Save button.
The Save As window appears.

3) Select Desktop using the drop-down menu to the right of Save in.

4) Click the Save button.
A progress meter moves as the download is completed.

5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.

6) Double click the Icon on your desktop for the newly saved file.
The Dell Bios Release Notes window appears.

Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok