Dell 32 Bit Diagnostics, v.5131A0, 5131.1
AUTOMATIKUSAN TELEPÍTETT Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
Dell Diagnostics are designed to verify proper operation of the hardware in your system outside of a high level operating system environment.
Ajánlott
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót. Mutasd meg, hogyan!
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet. A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
Fixes & Enhancements
Adds support for new platforms and processors.
További információVerziószám
5131A0, 5131.1
Kibocsátás dátuma
29 ápr. 2013
Letöltés típusa
Diagnostics Utility
Kategória
Diagnosztika
Fontosság
OptionalDell Technologies recommends reviewing this update to determine if it applies to your system. The update contains changes that impact only certain configurations or provides new features that may or may not apply to your environment.
Elérhető formátumok View Important Information
Fájlformátum: Diagnostic Distribution Package for Linux
Fájlnév: EL5131A0.bin
Fájlméret: 2.67 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
972571c542768d5dcb15472c791bb188
SHA1:
Not available
SHA-256:
Not available
Fájlformátum: ZipPack External
Fájlnév: DELL_32-BIT-DIAGNOSTICS_5131-1_R243632.exe
Fájlméret: 2.6 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
Not available
SHA1:
Not available
SHA-256:
Not available
A letöltéssel Ön elfogadja a Dell szoftverlicenc-szerződés feltételeit.
Fontos tudnivalók
The Dell 32 bit Diagnostics may not work correctly with some KVM switches.
Támogatott operációs rendszerek
Nem alkalmazható
A következőre vonatkozik:
32 bit Diagnostics
INFO,DIAGS,ENTERPRISE
Telepítési utasítások
Zippack Release
NOTE: In order to create diagnostic media using this package, this file must be downloaded to and executed on a system running Microsoft Windows. This package can be used to create a bootable diskette set, USB flash drive, CD, or hard drive image.
Download
1. Select the download method you want to use to retrieve the file - either HTTP or FTP.
2. If the Export Compliance Disclaimer window appears, read the agreement and then select either "I agree" or "I disagree".
3. When the File Download window appears, click Save.
4. From the Save As dialog, select a location and a file name then click "Save".
5. If a Download Complete window appears, click Close.
Diagnostic Media Creation
1. Browse to the location where you downloaded the file and double-click it to extract the diagnostic files and start the distribution application.
2. Verify that you have the correct diagnostic package by reviewing the information on the dialog box that appears then click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files. After the files are extracted, a message should appear indicating that all files were successfully unzipped.
5. Click the OK button to start the Dell Diagnostic Delivery Package. Follow the on screen prompts to create the media desired.
Running the Diagnostics
1. Insert the media you created.
2. Boot the computer. (You may have to configure the boot order in BIOS setup to boot the media you created before other devices.)
3. Follow the on-screen prompts.
There will be a readme.txt file in the location you selected to unzip the files that contains additional and late breaking information. If you need to run the Delivery Package again, you can run the file DDDP.exe from that same location.
Linux Release
NOTE: In order to create diagnostic media using this package, this file must be downloaded to and executed on a system running Linux. This package can be used to create a bootable diskette set, USB flash drive, CD, or hard drive image.
Download
1. Select the download method you want to use to retrieve the file - either HTTP or FTP.
2. If the Export Compliance Disclaimer window appears, read the agreement and then select either "I agree" or "I disagree".
3. When the File Download window appears, click Save.
4. From the Save As dialog, select a location and a file name then click "Save".
5. If a Download Complete window appears, click Close.
Diagnostic Media Creation
1. Change to the directory where you downloaded the DDDP script file.
2. From a shell command line prompt execute the DDDP script file downloaded as the root user.
3. Review the README file from the DDDP script being executed for more details about media creation.
5. Follow the on screen prompts to create the media desired.
Running the Diagnostics
1. Insert the media you created.
2. Boot the computer. (You may have to configure the boot order in BIOS setup to boot the media you created before other devices.)
3. Follow the on-screen prompts.
There will be a README file in the temporary directory created during the DDDP script execution that contains additional and late breaking information.
NOTE: In order to create diagnostic media using this package, this file must be downloaded to and executed on a system running Microsoft Windows. This package can be used to create a bootable diskette set, USB flash drive, CD, or hard drive image.
Download
1. Select the download method you want to use to retrieve the file - either HTTP or FTP.
2. If the Export Compliance Disclaimer window appears, read the agreement and then select either "I agree" or "I disagree".
3. When the File Download window appears, click Save.
4. From the Save As dialog, select a location and a file name then click "Save".
5. If a Download Complete window appears, click Close.
Diagnostic Media Creation
1. Browse to the location where you downloaded the file and double-click it to extract the diagnostic files and start the distribution application.
2. Verify that you have the correct diagnostic package by reviewing the information on the dialog box that appears then click Continue.
3. Specify the location to unzip the files.
4. Click on the OK button to extract files. After the files are extracted, a message should appear indicating that all files were successfully unzipped.
5. Click the OK button to start the Dell Diagnostic Delivery Package. Follow the on screen prompts to create the media desired.
Running the Diagnostics
1. Insert the media you created.
2. Boot the computer. (You may have to configure the boot order in BIOS setup to boot the media you created before other devices.)
3. Follow the on-screen prompts.
There will be a readme.txt file in the location you selected to unzip the files that contains additional and late breaking information. If you need to run the Delivery Package again, you can run the file DDDP.exe from that same location.
Linux Release
NOTE: In order to create diagnostic media using this package, this file must be downloaded to and executed on a system running Linux. This package can be used to create a bootable diskette set, USB flash drive, CD, or hard drive image.
Download
1. Select the download method you want to use to retrieve the file - either HTTP or FTP.
2. If the Export Compliance Disclaimer window appears, read the agreement and then select either "I agree" or "I disagree".
3. When the File Download window appears, click Save.
4. From the Save As dialog, select a location and a file name then click "Save".
5. If a Download Complete window appears, click Close.
Diagnostic Media Creation
1. Change to the directory where you downloaded the DDDP script file.
2. From a shell command line prompt execute the DDDP script file downloaded as the root user.
3. Review the README file from the DDDP script being executed for more details about media creation.
5. Follow the on screen prompts to create the media desired.
Running the Diagnostics
1. Insert the media you created.
2. Boot the computer. (You may have to configure the boot order in BIOS setup to boot the media you created before other devices.)
3. Follow the on-screen prompts.
There will be a README file in the temporary directory created during the DDDP script execution that contains additional and late breaking information.
Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok
További letöltésekért lépjen a következő oldalra: Illesztőprogramok és letöltések. Az ezen az oldalon található információk használatával kapcsolatban látogasson el az illesztőprogramokkal kapcsolatos súgó és oktatóanyagok oldalára.