AUTOMATIKUSAN TELEPÍTETTEz a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Intel Matrix Storage Manager Vista/Win7 64bit Driver (for pre-installation using the F6 method only)
Ajánlott
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.
Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót.Mutasd meg, hogyan!
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet.A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file contains a compressed (or zipped) set of files. Download the file to a folder on your hard drive, and then run (double-click) it to unzip the set of files. Follow the instructions to complete the installation.
For per-installation using F6 method only: 1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package.
2. Create a floppy* containing the following files in the root directory: iaAhci.inf, iaAhci.cat, iaStor.inf, iaStor.cat, iaStor.sys, and TxtSetup.oem.
* Note: For Windows Vista you can use a floppy, CD/DVD or USB.
3. For Windows XP or later operating systems:
- At the beginning of the operating system installation, press F6 to install a third party SCSI or RAID driver.
- When prompted, select 'S' to Specify Additional Device.
- Continue to step 5.
4. For Windows Vista:
- During the operating system installation, after selecting the location to install Vista, click Load Driver to install a third party SCSI or RAID driver.
- Continue to step 5.
5. When prompted, insert the media (floppy, CD/DVD or USB) you created in step 2 and press Enter.
6. At this point you should be presented with a selection for one of the controllers listed in the Overview (Section 1) of this document depending on your hardware version and configuration.
7. Highlight the selection that is appropriate for the hardware in your system and press Enter.
8. Press Enter again to continue. Leave the floppy disk in the system until the next reboot as the software will need to be copied from the floppy disk again when setup is copying files.
1. Double click the Release exe file(RXXXXXX.exe) to extract all driver files from the installation package.
2. Create a floppy* containing the following files in the root directory: iaAhci.inf, iaAhci.cat, iaStor.inf, iaStor.cat, iaStor.sys, and TxtSetup.oem.
* Note: For Windows Vista you can use a floppy, CD/DVD or USB.
3. For Windows XP or later operating systems:
- At the beginning of the operating system installation, press F6 to install a third party SCSI or RAID driver.
- When prompted, select 'S' to Specify Additional Device.
- Continue to step 5.
4. For Windows Vista:
- During the operating system installation, after selecting the location to install Vista, click Load Driver to install a third party SCSI or RAID driver.
- Continue to step 5.
5. When prompted, insert the media (floppy, CD/DVD or USB) you created in step 2 and press Enter.
6. At this point you should be presented with a selection for one of the controllers listed in the Overview (Section 1) of this document depending on your hardware version and configuration.
7. Highlight the selection that is appropriate for the hardware in your system and press Enter.
8. Press Enter again to continue. Leave the floppy disk in the system until the next reboot as the software will need to be copied from the floppy disk again when setup is copying files.
Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok