Újraindítás szükségesAUTOMATIKUSAN TELEPÍTETTEz a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
This package provides the driver for Dell BMC Firmware Update and is supported on Enterprise Servers and Powervault models that are running the following Operating System: NA.
Ajánlott
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.
Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót.Mutasd meg, hogyan!
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet.A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Fájlformátum:Frissítőcsomag MS Windows rendszerhez (32 bites)
Fájlnév:BMC_FRMW_WIN_R202148.EXE
Fájlméret:4.57 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
D9623C16AA2C7959C89BC3A5F318AF5A
SHA1:
Not available
SHA-256:
Not available
Fájlformátum:Kibontja a fájlokat közvetlenül a helyi lemezre
Fájlnév:PE2900Bmc_A12.exe
Fájlméret:329.5 KB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
61ac6468e006edae0a54205dafca1179
SHA1:
Not available
SHA-256:
Not available
Fájlformátum:Update Package for Red Hat Linux
Fájlnév:BMC_FRMW_LX_R202148.BIN
Fájlméret:3.7 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update. Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
Important Information for Update Packages for Microsoft Windows 1. Do not run other applications while executing Dell Update Packages. 2. When upgrading the BMC/ESM firmware or the BP firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, the update may take up to 20 minutes to complete. 3. To speed up the time it takes to perform such updates on PowerEdge x8xx or x9xx servers, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command ""rundll32 ipmisetp.dll, RemoveTheDevice"" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command ""rundll32 ipmisetp.dll, AddTheDevice"". On PowerEdge x9xx servers, the driver can be re-installed by performing a ""Scan for hardware changes"" in the Device Manager. 4. When upgrading the BMC/ESM firmware on PowerEdge x8xx or x9xx servers with the Windows Server 2003 R2 IPMI driver installed, multiple time-out warning messages from source ""IPMIDRV"" with Event ID 1004 are logged in the System Log in the Event Viewer console. 5. These messages can be safely ignored. However, to prevent the messages from being logged, you can uninstall the R2 IPMI driver before performing the firmware upgrade operation using the command ""rundll32 ipmisetp.dll, RemoveTheDevice"" from a command prompt. After the firmware flash is complete, you can install the driver again by executing the command ""rundll32 ipmisetp.dll, AddTheDevice"". On PowerEdge x9xx servers, the driver can be re-installed by performing a ""Scan for hardware changes"" in the Device Manager. 6. For more information on this issue, including information on the cause of this issue, see the Microsoft KB article number 912596.
Important Information for Update Packages for Linux 1. Do not run other applications while executing Dell Update Packages. 2. If the following error occurs, ""Error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory"", you must install the compatibility libraries from ""www.redhat.com"" or from the Red Hat CD. To install the compatibility libraries, use the following command: ""RPM -ih compat-libstdc++-33-3.2.3-47.3.i386.rpm"" 3. Dell Update Packages for BMC, BP, ESM, and DRAC5 require the OpenIPMI driver to be loaded on your system. The current drivers can be downloaded from the Dell Support website at ""support.dell.com"".
1. Click Download File to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.
Hard Drive Installation (File Extractions Only) Instructions
Download 1.Click Download File, to download the file. 2. When the File Download window appears, click Save or Save this program to your hard drive.
Installation 1. Browse to the location where you downloaded the file and double-click the new file. 2. Follow the remaining prompts to perform the update.
Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok