Seagate Momentus Thin 2.5",SATA,3Gb/s,7200,512e Firmware Update

Újraindítás szükséges AUTOMATIKUSAN TELEPÍTETT Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
This package provides the Windows/DOS based Seagate Momentus Thin 2.5",SATA,3Gb/s,7200,512e (ST320LT009-9WC142) Firmware Update and is supported on Latitude, OptiPlex and Precision models that are running the following Operating Systems: XP, Vista, Windows 7 and DOS.
Ajánlott

Keresse meg a legjobb letöltést a rendszeréhez

Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.

Keresés a támogatási adatok között

Adja meg Dell-szervizcímkéjét vagy -modelljét

Szeretné kikeresni termékét? Adjon meg egy termékazonosítót. Mutasd meg, hogyan!

This driver is not compatible

This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.

További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.

Fixes & Enhancements

Fixes
- Not Applicable.

Enhancements
- Enhanced the read/write interaction.
- Enhanced hard drive response after the system has been idle for long hours.
További információ

Verziószám

1002DEMA, A01

Kibocsátás dátuma

30 júl. 2012

Letöltés típusa

Firmware

Kategória

Adattárolás

Fontosság

Recommended
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Elérhető formátumok View Important Information

Fájlformátum: Kibontja a fájlokat közvetlenül a helyi lemezre
Fájlnév: JUL2DEMA.zip
Fájlméret: 32.44 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
396602a9fd3034dead16c22b38982ea0
SHA1:
135543347d2979a0a48a4d569256120e81934af6
SHA-256:
7fa1fe84af7985ba9f7e09001e4530fa701cfbdb7739677bfbbb29c75db072ce

A letöltéssel Ön elfogadja a Dell szoftverlicenc-szerződés feltételeit.

További részletek

Show All | Az összes elrejtése
1. Please close other applications before updating.
2. While the firmware is updating, please don't turn off the computer.
3. If the firmware utility fails to update, please use the legacy mode instead of the BIOS default SATA configuration.
4. If the firmware utility fails to operate in a secure computing environment, please uninitialized the security application prior to the firmware update.
5. Else, please consult your security application vendor.
Seagate ST320LT009-9WC142
Windows based firmware update for ST320LT009-9WC142:-
1. Download and unzip JUL2DEMA.zip into your desktop.
2. In JUL2DEMA folder, please search for the Windows folder.
3. Double click JUL2DEMA.EXE and it will begin to run. On the first screen you will select your language, and then select OK. The next screen is the welcome screen, click Next to proceed. Following up with a warning screen, please read thoroughly and select Next. The next screen is the License Agreement screen. If you agree, choose I accept and then click Next.
4. You will then come to the screen that asks you to close and save all applications and to back up your data. When you are ready to start the firmware update, please check Begin firmware update procedure, and then click Proceed.
5. The computer will reboot and follow up with the HDD firmware update activities. Once the firmware update is complete the system will reboot into Windows.

USB based firmware update for ST320LT009-9WC142:-
1. Download and unzip JUL2DEMA.zip into your desktop. In JUL2DEMA folder, please search for the USB folder.
2. Please insert a USB key and execute USB2DEMA.EXE. This will launch the Seagate Linux USB boot maker utility. Click Next to proceed.
3. The next screen is the License Agreement screen. If you agree, choose I accept and then click Next. Following up with a warning screen, please select your desired USB key drive letter. You may backup all your data in your USB key as the Seagate Linux USB boot maker utility will wipe out your USB key. Check This will wipe out to proceed and click Create. Choose Yes to format your USB key.
4. Reboot your computer from the USB key, your computer will now start updating the HDD firmware. Once the firmware update is completed, please any key to continue and this will turn off your computer. Once the computer has been powered down, you can now turn the computer on

Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok