AUTOMATIKUSAN TELEPÍTETTEz a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
Lehet, hogy az oldal tartalma gépi fordítás útján lett fordítva. Visszajelzés küldéséhez töltse ki az oldal alján található űrlapot.
Ez a fájl automatikusan települt egy korábbi frissítés részeként. Ha bármilyen problémát tapasztal, manuálisan letöltheti és újratelepítheti.
iDRAC6 1.41 A00 release for PowerVault DX6000 & PowerVault DX6012S.
Ajánlott
Keresse meg a legjobb letöltést a rendszeréhez
Kérjük, adja meg a termék adatait a rendszeréhez tartozó legfrissebb illesztőprograminformációk megtekintéséhez.
Keresés a támogatási adatok között
Adja meg Dell-szervizcímkéjét vagy -modelljét
Szeretné kikeresni termékét? Adjon meg egy termékazonosítót.Mutasd meg, hogyan!
No results found.We couldn't find anything for your search. Please modify your search and try again.
This driver is not compatible
This driver is not applicable for the selected product. Choose another product to re-enter your product details for this driver or visit the Product Support page to view all drivers for a different product.
Az automatikus ellenőrzés használatához jelentkezzen be a Windowsba rendszergazdaként. Ha már bejelentkezett rendszergazdaként, és látja ezt az üzenetet, kérjük, indítsa újra a számítógépet.A rendszert az IT-rendszergazda kezeli, és előfordulhat, hogy a funkciók köre korlátozott.
További frissítések. A SupportAssist segítségével megtalálhatja az eszközéhez elérhető legújabb illesztőprogram-frissítéseket.
A Dell Technologies azt javasolja, hogy a frissítést a következő ütemezett frissítési ciklusban telepítse. A frissítés változásokat tartalmaz a rendszer megfelelő állapotának fenntartása érdekében. Biztosítja, hogy a rendszerszoftver naprakész és kompatibilis maradjon más rendszermodulokkal (firmware, BIOS, illesztőprogramok és szoftverek), és más új funkciókat is tartalmazhat.
Fájlformátum:Frissítőcsomag MS Windows rendszerhez (32 bites)
Fájlnév:IDRAC6_FRMW_WIN_R262202.EXE
Fájlméret:41.14 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
Dell Update Packages (DUP) in Microsoft Windows 32bit format have been designed to run on Microsoft Windows 64bit Operating Systems. Dell Update Packages (DUP) in Microsoft Windows 64bit format will only run on Microsoft Windows 64bit Operating Systems. When selecting a device driver update be sure to select the one that is appropriate for your operating system.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
8D49501EE8DEDBF414578AE8771220F8
SHA1:
Not available
SHA-256:
Not available
Fájlformátum:Kibontja a fájlokat közvetlenül a helyi lemezre
Fájlnév:iDRAC6__1.41__A00_SelfExt.exe
Fájlméret:37.41 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
This file format consists of an archive of files that may be decompressed to a directory on the hard drive. The installation can then be done from that directory.
A letöltés integritásának biztosítása érdekében ellenőrizze az ellenőrző összeg értékét.
MD5:
1dcc2277027019ae9f0ef03b2d249692
SHA1:
Not available
SHA-256:
Not available
Fájlformátum:Update Package for Red Hat Linux
Fájlnév:IDRAC6_FRMW_LX_R262202.BIN
Fájlméret:40.01 MB
Ez egy nagy fájl. A kapcsolat sebességétől függően a letöltés eltarthat egy ideig.
Formátum leírása:
Dell Update Packages for Linux can be used as stand-alone applications that ensure that specific validation criteria are met, then apply an update. Note: Update Packages for Linux are open source. See the Dell Update Packages for Linux Readme for details.
1. A portion of this software may contain or consist of open source software, which you can use under the terms and conditions of the specific license under which the open source software is distributed. Under certain open source software licenses, you are also entitled to obtain the corresponding source files. You may find corresponding source files for this program at http://linux.dell.com/files 2. iDRAC firmware boot can not be interrupted in uboot unless the manufacturing mode jumper is installed. 3. To avoid the "Login Failure" error when launching Virtual Media, make sure to clear the WebStart cache so that the new viewer is downloaded. To do so, run "javaws –viewer" from a DOS prompt and then select and clear out all the WebStart applications in the cache. 4. For viewing the Dell signed certificate instead of the Avocent signed one: a. Uncheck "Preserve Configuration" option while updating the firmware via GUI. b. Clear the client java cache using the command "javaws -viewer". 5. In order to meet the factory requirements, after updating firmware using DOS utility, it will wait for 90 seconds before returning to command prompt.
1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Read over the release information presented by executing the ./IDRAC6_FRMW_LX_R262202.BIN --version command from the shell. 2. Download and install any prerequisites identified in the above step before proceeding. 3. Run the update by executing ./IDRAC6_FRMW_LX_R262202.BIN from the shell. 4. Follow the remaining prompts to perform the update.
Instructions for IDRAC6_FRMW_WIN_R262202.EXE:
Download
1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Installation
1. Browse to the location where you downloaded the file and double-click the new file. 2. Read over the release information presented in the dialog window. 3. Download and install any prerequisites identified in the dialog window before proceeding. 4. Click the Install button. 5. Follow the remaining prompts to perform the update.
Custom Instructions for iDRAC6__1.41__A00_Readme.txt:
1) Click Download now. The File Download window appears.
2) Click the Save button. The Save As window appears.
3) Select Desktop using the drop-down menu to the right of Save in.
4) Click the Save button. A progress meter moves as the download is completed.
5) If necessary, click X in the upper right-hand corner of the Download Progress Window to close it upon completion.
6) Double click the Icon on your desktop for the newly saved file. The Dell iDRAC Readme window appears.
Instructions for iDRAC6__1.41__A00_SelfExt.exe
Download 1. Click the Download Now link to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Extract Files 1. Browse to the location where you downloaded the file and double-click the new file to unzip the download package. 2. Specify the location to unzip the files. 3. Click on the unzip button to extract files.
GnuPG Signature of Dell Update Package Instructions for IDRAC6_FRMW_LX_R262202.BIN.sign:
Download 1. Click the "Download Now" link to download the file. 2. When the "File Download" window appears, click "Save" to save the file to your hard drive.
Installation 1. Import the Dell public key. (You only need to do once on your system.) 2. Verify the Dell Update Package by using its signature file, IDRAC6_FRMW_LX_R262202.BIN.sign
Illesztőprogramokkal kapcsolatos súgó és oktatóanyagok